+

Download Free
3D Printable Objects

Download free 3D printable objects

Hand Grenade Trap

Complexity:4
by Badscr

2014 Halloween Design Competition entry- Curiosity Cabinet   Scare your friends with this hand grenade trap, which looks like something out of Saw! This 10 part file makes the piece both mechanical and terrifiyingly real. Be prepared for the season of trick or treat!

Destiny: Conduit F3 Fusion Rifle

Complexity:3
by soulorigin89

Conduit F3 is a burst-fire legendary fusion rifle manufactured by the FWC.Like other fusion rifles, this weapon was created by reverse-engineering technology captured from enemy species.It can be obtained from Lakshmi-2 for 150 Crucible Marks after reaching rank 3 in Future War Cult reputation and from decoding rare and legendary Special weapon engrams. In Destiny canon, fusion rifles are a new, emerging technology for Guardians.Early fusion rifles were deemed inherently unstable and had problems with faulty radiation shielding. Bungie Art Lead Tom Doyle stated that the barrel configuration on the Conduit F3 solves these issues by "dampening the wattage use needed to power the inertial chamber".Doyle went on to state that the Conduit F3's "over-penetrating burst fire is ideal for taking out multiple targets at once." Unreadable characters can be seen written near the front of the stock. The nature and origin of these characters is unknown.

Clap T Rex

Complexity:3
by matteosgherri

​If you're happy and you know it clap your hands... Sad T rex from the meme. Print your very own dinosaur model!

MyBuild Robot Frame

Complexity:
by MyBuild

MyBuild frame design is a novel addition compatible with Lego bricks. Builders can easily build a frame and coat with Lego bricks for robot creation. The robot frame design is specialized in articulation and poseability. The 3D designs include the print supports. You could easily remove the supports after printing. This open source of 3D designs is Creative Commons - Non Commercial - Share Alike. Free download the building instruction in pdf file and watch our stop-action videos of Lego robot on our website. http://www.herodesignstw.com/#!3d-models-free-download/c20me FDM printer ABS filament Print speed: slow Print quality: fine  

Annunciation at Holland Park, London

Complexity:4
by Jonathan Beck

Annunciation is a bronze sculpture produced by Andrew Burton in 2013. It is a conceptual piece, depicting a horn an cogs which resemble the voice and workings of artists. Thie sculpture is one off and is a celebrated art piece in contemporary British sculpture. It has been on display in Kensington High Street and Chelsea, but now takes permanent residence at Holland Park This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com! #TwentyFirstCentury

Bartle Bogle Hegarty Logo

Complexity:1
by michaelaregan

Bartle Bogle Hegarty is one of the world’s most famous creative advertising agencies. Founded in 1982 by British ad men John Bartle, Nigel Bogle and John Hegarty, the agency has produced campaigns for many of the world’s most illustrious brands. 

Eckerput Vase

Complexity:1
by bruceeckerput

Just a simple twisted vase based on a pentagon. This is perfect to store plants in. The design is vey cool as i has a swirl pattern as though its twisting around.

The Big Tooth

Complexity:2
by MyMiniFactory

A tooth for your tooth brushes. Download and print this toothbrush holder for your family to use. You can acetone this model for better surface finish or just spray paint it.

Universal adjustable hoover nozzle

Complexity:2
by jackimakr

Adaptable hoover pipe, you can size the radius as you need and adapt it to your personal vacuum cleaner. It could be useful for cleaning the small spaces if you size it with the smaller pipe diameter.

Math Spinner Toy

Complexity:1
by pauloblank

This is a great toy for kids to play and learn math. Print the 8 parts and get a water pipe with external diameter of 32mm, cut with 110mm length. Superglue the two caps. Download and print freely ! Enjoy ! Paulo Blank Brazil

Stegosaurus Dinosaur

Complexity:2
by samanthagriggs

A little stego to play with. Great animal. Beautiful model for you to play with. Great for kids to play with.

Tangle Toy

Complexity:3
by kreasi3d

The Tangle Toy is fun for adults and children alike. 18 semi-circular segments join together to create a twisting and turning 3D form with unlimited possibilities. Perfect in times of stress to unwind.

iPhone 4/5 Audio Amp

Complexity:1
by fredsena

Need an audio boost? This iPhone stand doubles as an amplifier without any extra power. Just place your phone in the cradle, press play and sit back and relax.

Key To My Heart

Complexity:2
by rachel lawson

A meaningfull peandant 'key to my heart'.  A very romantic piece of jewellery that could be brought for a loved one. This is sure to make our valentines day lover like you;)

Clay Golem

Complexity:2
by Atom Jaay

2014 Halloween Design Competition-Curiosity Cabinet   A joint project with Brad Haddock This piece is a 3D scan of a clay sculpture. It was part of an art project aimed at applying 3D printing to classical disciplines. This particular sculpture was the model for the pawn in a complete chess set. However, it stands on its own both literally and figuratively.  

Bust of Madame De Wailly at the MET, New York

Complexity:2
by Jonathan Beck

The portrait of Madame de Wailly displays the sculptor's gifts to best advantage. The solidity that characterizes his work is enlivened by an equally characteristic linearity, resulting in a brilliant eighteenth-century version of a Roman matron's portrait Sculpted by Augustin Pajou  in the 18th Century   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Whether that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Barnacules Stress Ball Head.

Complexity:1
by ricardoalves

A successful collaboration with the brilliant Barnacules Nerdgasm A.K.A Jerry has resulted in this BronzeFill print of his handsome face. For any Nerdgasm followers/fans this is the ultimate fanboy collection piece. Download your very own Barnacules head for free!!  https://twitter.com/Barnacules https://www.youtube.com/user/barnacules1

Zero Point Generator

Complexity:3
by soulorigin89

A new Terrain piece for the moduler wargames battlefield, the most ambitious design yet. With sixteen parts this is a really detailed design, but it's also a support free print and easily glues together. Will be a fantastic addition to any Battlefield or RPG, would be perfect for 40K, Sci-Fi and Steampunk. Even if you don't want to use this as part of the modular battlefield, just print the two Generator files and you can use it on any Terrain board. This is part of the moduler Wargames Battlefield.  Each tile comes in three parts, the 'Terrain Support' is common to all the tiles. Each Terrain support connects to another with the 'Terrain Link'. You glue a 'Surface' on top of the support, these surfaces come in lots of designs, I'm working on Fantasy as well as Sci-Fi, dungeons, space ship corridors and lots more. Glue the Zero Point Generator together and then this will fit on the Gernerator Base.

Snowflake Cookie Cutters

Complexity:1
by robertchandler

A set of four sturdy cookie cutters in different snowflake shapes. Cookies look great on their own or drawn on with icing.

P.E.K.K.A LV.1 Clash of Clans

Complexity:3
by soulorigin89

"Is P.E.K.K.A a knight? A samurai? A robot? No one knows! P.E.K.K.A's armor absorbs even the mightiest of blows, but it doesn't handle electricity too well ! This is my take on the awesome P.E.K.K.A character, It has fully articulating arms and head so you can pose the model. The model comes with the option to have two swords if you want that added lethality !   I hope you guys enjoy the model. You can find the rest of the Clash Of Clan miniature collection by clicking the link! Design inspired by Supercell's Clash of Clans Universe

USB robot Dr. Fluff

Complexity:1
by Thinker Thing

This robot was modded from a file created by Dr Fluffs Robot Factory. its FREE download it!. Here ! This retrotastic 3d printed robot has a slot for a USB pen drive. Print him in precious metals or plastic for instant retro cool. Fits kingston DTSe9 usb pendrive which can be purchaced here. 

Cutlery Coaster

Complexity:1
by 3DRene

A coaster designed to put your cutlery on, so that it doesn't damage the table. Built to accommodate a knife, spoon and fork.

vase

Complexity:1
by Loki Laufeysen

A small rounded vase with a solid base. Perfect for keeping flowers and other decorative items, this vase will make a nice addition to your mantelpiece. For a highly unique design the vase can be painted or decorated to please your personal tastes.

Burlesque Hat

Complexity:3
by Michele Badia

Gothic burlesque hat inspired. stunning design! A really stylish hat that can be attached to heaphones, headbands just to make you look that more individual.

date ice mold

Complexity:1
by 3D-RO

A number ice mold perfect for your house partys, print several and invite your friends. 

Catherine Hanly

Complexity:1
by MyMiniFactory

Catherine Hanly - Associate Editor at Mumsnet.  Mini-you courtesy of iMakr and Mini-You.

Overhead Spool Holder

Complexity:2
by morganstrongbow

Overhead filament spool holder. Fits plastic spools similar in size to Makerbot brand. Download file includes 2 versions for both regular and oversized spools of filament :) Fits - - Wanhoa Duplicator 4 (pictured) - Flashforge (pictured) - Makerbot - Reprap

Halloween Ghost gostee

Complexity:2
by prabhakar21987

2014 Halloween Design Competition entry- Curiosity Cabinet   Bring Boo the ghost from mario to life with his Atari hat and magical wand. This little trinket belongs in the curiosity cabinet of all Mario loving gamers everywhere.

Avanak Avni Model

Complexity:2
by MyMiniFactory

This is Avanak Avni, a famous Turkish Cartoon character. Perfect little fella to plonk on your desk.

Antique Knife

Complexity:2
by ankitjain

A curved knife. Print in the highest possible quality so the blade looks less layered. Best is 0.1 mm. PS: printed at 80% scale on pics.

Rolex Cufflinks

Complexity:3
by michaelaregan

Cufflinks printed using the Rolex Watch Logo. Rolex is the largest single luxury watch brand, producing about 2,000 watches per day.  The iconic Rolex logo comprises of a pointed crown symbol as the company’s slogan is “A Crown for every Achievement”. A crown symbolizes prestige, victory and perfectionism – something Rolex has always strived for and prided itself on. www.rolex.com  The file contains STL for single extrusion. Hit the download button to get yours!

Christmas Glasses

Complexity:2
by laurenmmf

These christmas themed glasses are the perfect addition to your party outfit. Whether you want your crush to notice the cool side of your personality, or to have fun with your kids/grand-children, these fun glasses are only a download away from your hands. Merry christmas, get creative during the holidays!

Black Widow Logo

Complexity:1
by arifsethi

Debuting as Marvels first super powered female character, the Black Widow has become one of the Marvel universes key characters. Played by Scarlett Johansson in both "The Avengers" and "Iron Man" films, she has become a well loved character both on the big screen and in the original comic books. This Black Widow logo will bring an element of the femme fatale to your own home.

Earphone Wrap

Complexity:2
by Dougwar

This is a perfect accessory to wrap your earphones and never loose them in your bag. Print it and share with friends. 

Fishing Buoy Type 2

Complexity:2
by MyMiniFactory

With this fishing float you are definitely going to catch more fish than your rivals with these 3D printed Buoys. If you are a keen fisherman please try it and give us some feedback and we can improve it.

Istanbul Key Chain

Complexity:1
by mugegoken

Istanbul keychain for Istanbul Lovers. Whether you are from Turkey and just love the place or you've visited there and need something to remember it then this is definatley for you!

Dino

Complexity:3
by flioink

This hybrid dinosaur is a generic take on one of the larger jurrasic animals that could of roamed our planet millions of years ago. With similarities to the velociraptor, this terrifying dinosaur has short taloned arms with long powerful legs.

Citrouille maléfique

Complexity:5
by Aigre-vice

2014 Halloween Design Competition entry- Halloween Prop   The most iconic decoration at Halloween is the pumpkin. Scraping out the horrible insides and spending hours on carving in your design is just two of the highlights of these famous decorations that can now be replicated on your 3D printer. This classic design is ideal for any home decorations or cabinet of curiosities.    

Smurf Mask- Halloween Costume -Full Scale

Complexity:2
by 3DCLOUD

2014 Halloween Design Competition entry- Halloween Prop   The little blue smurfs may be cute when they are running around on their toad stools, but make them 20 times larger and in a halloween costume and then you have a recipe for terror.   (Zip File Contains a file for the complete mask, and a mask split into several parts so you can print a full scale mask on smaller printers)

52mm front lens cap

Complexity:2
by jackimakr

Redesigned for 3D printing, this ingenius system guarantees a perfect fit ! Compatible with all 52mm lenses.

Violina iphone case

Complexity:1
by tiborrak

A case with the motif of the viola wind instrument.

Robert Burns at Victoria Embankment Gardens, London

Complexity:3
by Jonathan Beck

This larger than life bronze sculpture depicts Robert Burns, a cultural and literary icon from Scotland. He is most famous for his poem Auld Lang Syne, typically sung over New Years Eve in the United Kingdom. This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Emergency Tyre Inflator Bracket

Complexity:1
by Reg

This handy bracket is designed to hold Co2 tyre inflators. It has been specifically designed for IXS version however it fits standard cartridges. All that is needed to attach it to your bike are two standard zip-ties that can be found in all DIY or Hardware stores.  If you ever have tyre troubles and need to quickly inflate your tyre with minimum effort  then this gadget would be extremely useful and now you have the perfect attachement for your bike to.

Maiwand Lion in Forbury Garden, Reading, UK

Complexity:3
by Jonathan Beck

The Maiwand Lion is a sculpture and war memorial in the Forbury Gardens, a public park in the town of Reading, in the English county of Berkshire. The statue was named after the Battle of Maiwand and was erected in 1886 to commemorate the deaths of 329 men from the 66th (Berkshire) Regiment of Foot during the campaign in Afghanistan between 1878 and 1880. It is sometimes known locally as the Forbury Lion. It is much larger than life and was sculpted in bronze by George Blackall Simonds.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Head of a Woman at The Collection, Lincoln, UK

Complexity:2
by Jonathan Beck

This 19th Century sculpture by Artur Loewenthal depicts the head of an unknown woman. Sculpted in plaster it is believed to be a case study by the artist.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Winter Shade

Complexity:3
by richard

The 'Winter Shade' scatters snowflake shadows across your walls. There are many parts to the lampshade, but they should be easy to print and I've designed them to use very little support.

Star Wars Boba Fett Helmet

Complexity:1
by Alexandergargett

Boba Fett was a Mandalorian warrior and bounty hunter. He was a clone of the famed Jango Fett, created in 32BBY as the first of many Fett replicas designed to become part of the Grand Army of the Republic, and was raised as Jangos son. Jango taught Boba much, training him to become a skilled bounty hunter as was his father-figure before him. Boba was forced to grow up and took to travelling the galaxy. Later, he became a bounty hunter and took assignments from beings such as Jabba the Hutt, and achieved notoriety despite his young age.Assembly:Boba Fett comes in two parts, simply slot the communicater into the plug on the side of the helmet.

Trans-Letter at the Vecchiato Art Gallery, Italy

Complexity:2
by Jonathan Beck

This painted bronze sculpture was created by Italian sculptress 'Rabarama' whose work usually depicts men, women and hybrid creatures, often in eccentric poses. The skins of her subjects are always decorated with patterns, symbols, letters, glyphs and other kind of figures, in a great variety of forms. The sculpture is larger than life, and was made in the 21st Century. This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Whether that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Rococo ear cuffs

Complexity:2
by Michele Badia

Rococo Style ear cuffs Roccoco or "Late Baroque", is an 18th-century artistic movement and style, affecting many aspects of the arts including painting, sculpture, architecture, interior design, decoration, literature, music, and theatre. These ear cuffs are very unique but at the same time very cool. Enjoy

Kinder Crocodile

Complexity:1
by humanti

Another member of the Kinder animal family, this cute little crocodile is a perfect desk companion. Perfect for model painters and those who like fine detail.

Kitty Cat On Books

Complexity:2
by Michele Badia

Kitty Cat On Books; The domestic cat,  Felis catus, or Felis silvestris catus is a small, usually furry, domesticated, and carnivorous mammal,  :-),  but in our case, it gonna hold the books!!! Yeeeee!! Enjoy!

PacMan Ring

Complexity:1
by zlupus

One of the figure heads for retro style, PacMan has been consistently popular since his release in 1980 and considered a creation of the golden age of games. Bring an icon of 80's fashion and culture to your jewellery collection with this PacMan ring. 

'20 Car

Complexity:2
by jackimakr

Original car from 1920.

Myminifactory Mascot

Complexity:
by soulorigin89

Inpsired by the Character Eva from W.A.L.LE, I modeled this robot to serve as the Myminifactory Mascott.Everything always looks better with a Bow tye dont you think ?

Buy 3D printed objects

Warhammer:40k Ork

Complexity:5
by NickeyD

Orks are a race of savage, war-driven humanoids who heavily outnumber every race in the milky way galaxy of the 41st millenium. They are often reffered to as the greenskins, who were genetically engineered millions of years ago in order to fight off the Necrons.  They fight in hordes and overwhelm their enemies with brute force.    This ork is inspired from the Warhammer:40K Universe.    

Wall Mount Hex Pen Holder - Sharpie Edition

Complexity:1
by izoony

Hexagonal honeycomb inspired Sharpie marker pen holder. Includes screw hole to mount on wall.   Want the regular pen version?  

Smile Case

Complexity:1
by georgeloukrezis

Its a simple logo for when you want to take a photo to your friends to encourage them to smile ;)

Honeycomb Bee iphone case

Complexity:1
by tiborrak

Delicious bee inspired iphone case...super sweet. Bzzzz!

WILTON'S MUSIC HALL pen

Complexity:1
by Michele Badia

Pen based on the famous columns that can be found in England's oldest surviving music hall, Wiltons in London (opened in 1859!).Wilton's Music Hall. Wilton’s is the world’s oldest surviving Music Hall and London’s best kept secret. This stunning and atmospheric building is home to an exciting programme of imaginative, diverse and distinct entertainment including theatre, music, comedy, cinema and cabaret.   See the full range of products on display at Wilton's Music Hall!Find out more about the venue and events at: http://wiltons.org.uk/  

House Stark Game Of Thrones

Complexity:1
by ricardoalves

Winter is Coming to My Mini Factory! The house of Stark's Sigil from the famous series The Game of Thrones is ready to launch your printer! The famous Wolf can now be printed in 1h30, feel free to painted as you like. More Sigil's coming soon to MMF. Stay in touch. Happy printings! Drop me a message if you have any doubts.   Finished in acrylic paints and guilding wax. 

Dolce Gusto Drip Tray

Complexity:1
by andr

Replacement drip try for the Nescafe Dolce Gusto coffee machine.

iPhone flexible bumper

Complexity:1
by Michele Badia

Using the latest flexible filament technology you can download and print this bumper for the iPhone 5s, used alongside an interchangable backplate you can customise your iPhone to your hearts content! Print this using NinjaFlex filament - which you can purchase here

Star-lord's rocket boosters from Guardians of the Galaxy

Complexity:2
by Kirby Downey

These Rocket boosters are a replica of the ones worn by Star-lord in the new Marvel movie Guardians of the Galaxy. Star-Lord is a master strategist and problem solver who is an expert in close quarter combat, various human and alien firearms, battle techniques and has extensive knowledge of various alien customs, societies and cultures, and considerable knowledge about cosmic abstracts, such as Oblivion.  These boots allow for star lord to fly. the are easy to attach with simply velcro straps and a great additiopn for any Star-lord cosplay. Download Star-lords mask here Doanload star-lords Elemenet guns here

Lens hood compatible with 70-200 f4

Complexity:2
by didexe

A replacement for your broken or lost Canon 17-40 lens hood. It has even the small brackets to make it fit absolutely perfect. Print both hood and brackets as they are in the file to get maximum strength and quality. Use highest resolution to make sure they fit well. Recommending to use black or dark grey plastic to avoid color casts in your images.

Spool cover B/D37474 for strimmers

Complexity:3
by jackimakr

Spool cover Black & Decker 37474 for strimmers, you can attach it in the bottom part of your strimmer  to fix the cutting spool filament .

NinjaFlex Handlebar Grips

Complexity:2
by Michele Badia

Handlebar grips for bicycles, printed with NinjaFlex. Fits all types of standard handlebars (Mountain bike, BMX, etc.). Print using NinjaFlex filament - which can be purchased here

Imakr Nut and bolt

Complexity:1
by claudionoble9471

1.25 Pitch nut and bolt.  

The Shard London

Complexity:1
by Jonathan Beck

The Shard is an 87-storey high skyscraper of contemporary architecture that features in the London skyline. It is the UK's second-tallest free-standing structure standing at 224.3 metres tall. The building is impressive in its unfamiliar form which pierces into the sky. Its construction began in 2009 and was inaugurated on the 5th July 2012. This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com! This model was featured as part of the Thames Festival 2014 for Scan The World.

Dishwasher lower basket wheel

Complexity:3
by jackimakr

It's a genuine spare part for select Bosch, Neff and Siemens appliances.

Dot Clock

Complexity:2
by Stewart Davies

The Dot clock uses small components to allow for a bigger clock than a print bed is able to produce. The file comes with individual stl components so you can customize the clock filiment colours as you wish. You will need to purchase a Quartz clock mechanism but these can be easily found for about £1/$2 - £2/$3.75

45 degree links for Go pro

Complexity:1
by MyMiniFactory

Another link for your Go Pro camera. To make it more flexible we add 45 degree angle links. We also made it in three variants so you can get different vertical angles. If you need some spare knobs here you can download the whole set.

Halo Magnum Gun

Complexity:2
by Alexandergargett

After a 140 years in production, the Misriah Armory has brought the M6 Magnum gun to the Public!   The M6 series weapons are recoil-operated and magazine-fed, and typically fire 12.7 x 40mm projectile ammunition. In addition to power, the M6 line of weaponry is designed to be rugged and reliable, and they remain operational after Slipspace transitions and high-g aerial maneuvers.   Assembly:    The Magnum will print in two parts, simply slot the barrel of the Magnum into the base of the handgun.

Girl with Doves in Cadogan Place at Sloane Street, London

Complexity:2
by coskucan

A life-size nude depicting a female figure on a plinth facing north-east. She has her weight on her right leg with her left foot slightly raised, arms above the head with five doves between her hands and head. David Wynne is the sculptor of this piece and was created in the 1970s when his studio was based in Wimbledon. This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com! #TwentiethCentury

Owl Climbing Hold

Complexity:1
by michaelaregan

Personalise your climbing wall with this Owl themed climbing hold, this hold can not only provide new challenges and help improve your climbing skills but also create exciting environments when climbing. Unleash your creativity and add a lick of paint to the wall to fully create the illusion of climbing higher into the trees whilst meeting this uplifting owl along the way!   Scale him up or down to really personalise your wall and create your own challenges in the world of climbing. Don't climb? No problem, he makes a rather cute decoration is you just want to hand him on your wall.    Please note! This product must be printed with 75% Infill or more if being used for a climbing wall. Test the product at a low height before moving up as printer qualities tend to vary. For best results, print in Carbon Fiber based filament. 

Precision Nozzle

Complexity:2
by jackimakr

Nozzle to use with Henry the hoover, it' s made for cleaning tiny spaces and angles. Attach it at the end of the vacuum cleaner metal pipe.

Bike coffee holder

Complexity:2
by jackimakr

Coffee holder for bike, you can use it to enjoy your coffee while you are cycling to your workplace in the morning.

Wine Bottle 2 Glass Holder

Complexity:1
by sandinotorres

Wine glass holder, perfect accompaniment for picnics, meals in the garden and festivals! Need a wine bottle holder?

GoPro Compatible Parts

Complexity:4
by MyMiniFactory

These parts will fit you Go Pro mount if you have lost any of the links or knobs from the original set. Consisting of five parts, that can be printed on any printer. They will require an M5 bolts - 40mm, 50mm, 60mm long respecively and standard M5 nut or dome nut. You can find them easily in any hardware store.

Lifeproof Belt clip for iphone 5

Complexity:3
by andrewcoyne

Belt clip for Lifeproof Iphone 5 case. Always keep your device by your side ! Come with 1.5" clip for regular belts and 2" clip for utility belts.

The Gherkin, London

Complexity:1
by Jonathan Beck

The Gherkin, formally known at 30 St Mary Axe, is a commercial skyscraper in London. Standing at 180 metres high and 41 storeys, the building is famous for its unfamiliar shape- similar to that of a gherkin (hence the name). It started construction in 2001 and opened in 2004. This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com! This model was featured as part of the Thames Festival 2014 for Scan The World.

The Field

Complexity:3
by richard

This is the start of moduler Wargames Battlefield. I've lots of designs and will be uploading them in the coming days and weeks. Each tile comes in three parts, the 'Terrain Support' is common to all the tiles. Each Terrain support connects to another with the 'Terrain Link'. You glue a 'Surface' on top of the support, these surfaces come in lots of designs, I'm working on Fantasy as well as Sci-Fi, dungeons, space ship corridors and lots more. This tile is the most basic, a field with a few bumps, but it is also the most important for building a battlefield.

Geiger-esque iphone case

Complexity:2
by mlager8

My take on a Geiger-esque inspires iphone case. Lots of tubes and ports/hatches.

Lens Hood compatible with Canon 17-40 f4

Complexity:2
by didexe

Lens hood replacement made by specific size. This version is compatible with your Canon 17-40. Available for purchase from Amazon and other resellers. Download it here for free and print it for pennies.

Ground mount compatible with GoPro

Complexity:1
by MyMiniFactory

Go Pro camera is a great think and we make it even greater with this ground mount which you basicaly stick in the soft ground and here you have a different point of view to make your footages more original and exciting.

My Mini Factory spool holder for Flashforge

Complexity:2
by jackimakr

This is a spool holder for Flashforge Creator printer, it has a nice My Mini Factory Logo and it's very easy to hook on the machine.

Flexi Ball Head

Complexity:1
by mattbagshaw

This smug little ball will be happy sat on your desk or anywhere else you can think to put it. Or you can print it in a flexible filament and squeeze it to your hearts content. Designed to print without support.

GoPro Universal fixture

Complexity:1
by MyMiniFactory

Go pro is a great thing and we make it even greater with this accessory which allows you to attach it virtually everiwhere with just two cable ties. Helmet, bike frame, railings, pipes ... just choose the right lenght of the ties and go wild. You will need one standard M5 bolt 50mm long and an M5 nut or dome nut.

Apple Picking Race

Complexity:2
by ivan_s_91@hotmail.com

Apple Picking Race design. Two people trying to reach the apple (Apple logo).

Peter Pan at Central North Hyde Park in Kensington Gardens, London

Complexity:2
by coskucan

This bronze statue of Peter Pan is in Kensington Gardens, next to Hyde Park. The exact location was chosen by Peter Pan's author, J.M. Barrie. Barrie lived close to Kensington Gardens and published his first Peter Pan story in 1902, using the park for inspiration. In his Peter Pan tale, The Little White Bird, Peter flies out of his nursery and lands beside the Long Water lake, on the spot where the statue now stands. This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com! #PeterPan #TwentiethCentury

Drum of Minions

Complexity:2
by alanstanford

This Drum of Minions is a rebrand of the classic Barrel of Monkeys game that has been a childhood classic for decades. 

Meet Me at St Pancras Station, London

Complexity:2
by coskucan

Standing 30 feet (9 metres) high and weighing nearly eight tonnes, The Meeting Place (Bisou) is a solid bronze couple locked in embrace under the large concourse clock, giving the timepiece the semblance of a full, illuminated moon in the night sky. Produced in 2008 by sculptor Paul Day. #TwentyFirstCentury This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

3Beards Beard Comb

Complexity:1
by michaelaregan

3D Printed beard comb for the 3Beards logo. 3Beards are a content, promotion and events company based in London hosting regular meet ups for the start-up community - www.3-beards.com File contains STL for single extrusion. Hit the download button to get yours!

Minion Pen Holder

Complexity:1
by alanstanford

Gru's tiny, yellow, loyal yet childish and funny, genetically-mutated henchmen. The Minions mostly speak their own gobbledygook-like language called "Minionese", although they do appear to understand English. They have existed since the beginning of time, evolving from single yellow cell organisms into beings, who have only one purpose - "to seek out and serve the most despicable master they can find." [Wikipedia]

Egg Holder Spring

Complexity:2
by MyMiniFactory

This awesome egg holder model will be a welcome addition to your kitchen. A fitting gift for those egg heads in the family!

Alexander Pushkin at Art Park Muzeon, Moscow

Complexity:2
by coskucan

On the grounds of Moscow Park of Arts "Muzeon" - sculpture of Alexander Sergeevich Pushkin, world famous Russian poet of 19th century (1799-1837). #AlexanderPushkin   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

My Mini Factory Dial for Makerbot 5th generation

Complexity:1
by jackimakr

Dial for Makerbot 5th generation, just print and slide it onto the pin.

Inverted Shelf Bracket

Complexity:2
by Ferreira and Ferreira

An awesome 3D printable design for improving your home interior. An inverted shelf bracket with sunken in screw holes, designed to hang under a tabletop, it should give you enough height clearance to hold a closed laptop.

Finger counting wall clock

Complexity:2
by Michele Badia

Finger counting stile wall clock, very clean urban style design, and funny fingers couting numeration.

Bleach Mask (Full Size)

Complexity:3
by fynngro

Wearable mask from the Manga series Bleach. File contains two printable versions - One as a single printable piece And other in two parts for easier printing. Perfect for cosplay at your next comicon adventure, or for this years halloween! Bleach (ブリーチ ) is a Japanese manga series written and illustrated by Tite Kubo, it follows the adventures of Ichigo Kurosaki after he obtains the powers of a Soul Reaper (死神) — a death personification similar to the Grim Reaper—from another Soul Reaper, Rukia Kuchiki. His newfound powers force him to take on the duties of defending humans from evil spirits and guiding departed souls to the afterlife, and set him on journeys to various ghostly realms of existence.

Grenade Themed Pot

Complexity:2
by michaelaregan

Add a bit of ‘Boom’ to your table decorations at dinner parties using this Grenade themed flower pot and ensure your guest have a blast! This fun little product prints support free and makes a memorable decoration, or it can be used to store small items.     Hit the download button now to get yours! File contails STL's for single extrusion. 

Top handle

Complexity:2
by jackimakr

Handle for Henry the hoover series.

Popular 3D Printable Objects

Destiny: Conduit F3 Fusion Rifle

Complexity:3
by soulorigin89

Conduit F3 is a burst-fire legendary fusion rifle manufactured by the FWC.Like other fusion rifles, this weapon was created by reverse-engineering technology captured from enemy species.It can be obtained from Lakshmi-2 for 150 Crucible Marks after reaching rank 3 in Future War Cult reputation and from decoding rare and legendary Special weapon engrams. In Destiny canon, fusion rifles are a new, emerging technology for Guardians.Early fusion rifles were deemed inherently unstable and had problems with faulty radiation shielding. Bungie Art Lead Tom Doyle stated that the barrel configuration on the Conduit F3 solves these issues by "dampening the wattage use needed to power the inertial chamber".Doyle went on to state that the Conduit F3's "over-penetrating burst fire is ideal for taking out multiple targets at once." Unreadable characters can be seen written near the front of the stock. The nature and origin of these characters is unknown.

day of the dead ring ( Halloween )

Complexity:5
by Faust_Kelevra

2014 Halloween Design Competition entry- Curiosity Cabinet   The ring of the feast of the dead will be perfect to decorate your Halloween costume, or just that you love skulls and you dream to wear one on your finger. It is directly inspired by Mexican art and the day of the dead skulls. Day of the Dead  is a Mexican holiday observed throughout Mexico and around the world in other cultures. The holiday focuses on gatherings of family and friends to pray for and remember friends and family members who have died. The Day of the Dead celebrations in Mexico can be traced back to a pre-Columbian past. Rituals celebrating the deaths of ancestors had been observed by these civilizations perhaps for as long as 2,500–3,000 years. The festival that became the modern Day of the Dead fell in the ninth month of the Aztec calendar, about the beginning of August, and was celebrated for an entire month. The festivities were dedicated to the goddess  known as the "Lady of the Dead", corresponding to the modern Catrina.

Star-lord's Element Guns from Guardians of the Galaxy

Complexity:1
by Kirby Downey

This model is a replica of these guns used by Star-lord in the movie Guardians of the Galaxy. Star-lord uses an "Element Gun", a special meta-pistol capable of projecting one of the Four elements (air, earth, fire and water). It's the Element Gun, Star-Lord's signature sidearm, a weapon of extraordinary origin and commensurate power. The Element Gun is an advantage that gives the half-Earthling a fighting change against intergalactic villains like Thanos and Ronan the Accuser.  Star-lord's mask is avalable here  Star-lord's rocket boosters are avalable here Check out an article on the guns and the model here

Ghost Destiny

Complexity:2
by ricardoalves

I'm proud to present my own interpretation of the Destiny Ghost !  We're lauching the Destiny Collection to celebrate the launch of this awesome game! A Ghost is a levitating artificial intelligence used by Guardians, this one fits perfectly in the palm of your hand. Print your own Ghost today, paint it as you wish and then share the photos with us Happy Printing!

Barbarian King Clash Of Clans

Complexity:3
by ricardoalves

"The Barbarian King is the toughest and the meanest barbarian in all the realm, whose appetite for Dark Elixir has caused him to grow to a giant size. He can attack enemy villages or guard your village." Continuing my series of models this is my take on the Barbarian king from Clash of Clans. Download yours now for free! You can find the rest of the Clash Of Clan miniature collection by clicking the link! If you don't have a 3D printer you can buy the 3D Printed objects for only 9GBP ! Have fun!   Design inspired by Supercell's Clash of Clans Universe

GAME OF THRONES IRON THRONE

Complexity:3
by Daniel Schunemann

The Iron Throne is the throne upon which the King of the Andals and the First Men sits, located in the Red Keep in the city of King's Landing. Besides the King himself (or Lord Regent) only the Hand of the King may sit on the Iron Throne. The term is also used colloquially to refer to the monarchy that rules the Seven Kingdoms and the authority of the King (e.g. "Rebellion against the Iron Throne"). The current seater is King Tommen Baratheon, First of His Name. The Iron Throne was forged at the order of Aegon the Conqueror, the first of the Targaryen Kings, who conquered six of the seven independent kingdoms of Westeros and unified them under his rule - the seventh kingdom of Dorne was later joined through a marriage alliance. The throne was allegedly forged from the 1,000 swords that had been surrendered to Aegon in the War of Conquest by the lords who had offered their fealty, though the actual number of the swords is less than two hundred. These were subsequently melted down by the fiery breath of Aegon's dragon, Balerionthe Black Dread, then beaten and bent into a throne of imposing appearance.

Han Solo's Blaster Star Wars

Complexity:4
by soulorigin89

To celebrate the announcement of a new Star Wars film in production I have modeled the DL-44 blaster.The DL-44 was a powerful, highly modifiable and accurate blaster pistol. It packed a heavy punch compared to other pistols without losing accuracy, which made it a prime choice among many groups and individuals, ranging from smugglersand bounty hunters to military and the Rebellion. This is a Toy.   Aside from being a powerful and reliable sidearm, the weapon had other attractive features such as a vibration system built into the hand grip that pulsed gently to alert the user that the weapon had only five shots left, and the ability to charge a bolt twice as powerful into a capacitor without damaging the sidearm. Like most hand gun, its gear typically included a motion-sensitive scope and galven circuitry that allowed the pistol to deal more damage with a normal energy drain and fire rate.    

Guardians of the galaxy: Star lord's Mask

Complexity:1
by soulorigin89

Star-Lord is a master strategist and problem solver who is an expert in close quarter combat, various human and alien firearms, battle techniques and has extensive knowledge of various alien customs, societies and cultures, and considerable knowledge about cosmic abstracts, such as Oblivion. As Star-Lord, Peter Quill wears a suit that grants augmented strength and durability and the ability to travel through space. The character also uses an "Element Gun," a special meta-pistol capable of projecting one of the four elements (air, earth, fire and water). Star-Lord also shares a psychic link with his sentient space vessel, "Ship".(Wearable version coming soon! This model is a collectable 'NOT A WEARABLE' but feel free to adapt it if you have the skills!) Star-lord's Element guns avalaibe here Star-Lord's Rocket boosters avaliable here

Halloween skull lamps

Complexity:4
by mingshiuan99

2014 Halloween Design Competition entry- Curiosity Cabinet   These spooky Skull and crossed sword lamp can create excellent mood lighting for a terrifying halloween. By using a hair band and clip, you can put together the two crossed swords and hold them in place underneath the skull. By using a small LED light inside the skull, the meshed skull surface illuminates the room with spooky patterns splattered up the walls. Add the bats and spiders for extra detail and shadows!

Minion Chess

Complexity:2
by billysides

Runner Up : Open Competition October 2013 - This set was inspired by the Despicable Me movies we've all come to love. I incorporated their love of BANANAS! with their desire to rule the world into this awesome little 3D printable chess set. Help ME...err I mean...them take over the world by downloading this set, and if I am selected as the winner, I will finish the set off by creating a set of Evil Minions for them to battle in this game of wits...even though that seems to be in short supply among the minion race.

Blank Mask

Complexity:1
by alanstanford

Inizia la competizione per il progetto Halloween 2014! This mask comes in two versions. A full face mask and a masquerade style. Perfect for customisation - as we have provided this file in several formats for you - DXF, 3DS, STL, OBJ. If you need another format please email leon@myminifactory.com.  Why not push your deisgn skills to the limit, apply your artworks to the maks template and enter it into the MyMiniFactory Halloween design contest; the winning entrant will win a Flashforge dual-extruder 3D printer!

Nirumbee wand stand (or wacom pen stand)

Complexity:2
by Eder

2014 Halloween Design Competition entry- Curiosity Cabinet   This magic wand stand comes from the Pryor mountains where the Little People of the Crow lived. A small human-like skull sits on the base while on top a crow’s claw firmly grasps to it. If you rest your magic wand inside the stand, black magic will transfer to it and increase your sorcerer's abilities. Don't have a magic wand yet? You may use it as a Wacom Pen Stand in the mean time.

Star-lord's rocket boosters from Guardians of the Galaxy

Complexity:2
by Kirby Downey

These Rocket boosters are a replica of the ones worn by Star-lord in the new Marvel movie Guardians of the Galaxy. Star-Lord is a master strategist and problem solver who is an expert in close quarter combat, various human and alien firearms, battle techniques and has extensive knowledge of various alien customs, societies and cultures, and considerable knowledge about cosmic abstracts, such as Oblivion.  These boots allow for star lord to fly. the are easy to attach with simply velcro straps and a great additiopn for any Star-lord cosplay. Download Star-lords mask here Doanload star-lords Elemenet guns here

Shredded Skull

Complexity:3
by ImmersedN3d

2014 Halloween Design Competition entry- Curiosity Cabinet   I call these "Shredded Skulls". I used an open sourced skull model and used some intersect modeling to create this awesome look! There is a spot on the eye that needs supports but I've printed it several times without and had great results. Print single perimeter, 2 tops, 1 bottom. 5% infill should be enough. The goal is to have enough infill to support the top of the skull. I've printed it without infill but the smooth top portion of the skull can get messed up. Also make sure your retractions are good. I had to adjust slicer and reduce the minimum retraction distance from 2 to .5. Enjoy!! If you print it and post a picture somewhere be sure to tag me so I can see it! @ImmersedN3D

Destiny Cabal Phalanx

Complexity:2
by soulorigin89

  With one of the biggest games of the century just around the corner  I decided to model the Iconic Cabal Legionnaire from Destiny. The entire model was created inside Zbrush from primitives.   Cabal are a large, rhinoceros-like, bipedal race with thick grey skin, a flat nose, conical teeth, and small eyes.Despite being unable to breath the Martian atmosphere without their armor, the Cabal appear to exhibit an affinity to desert-like terrain, which is evident through their colloquial nomenclature and occupation of Mars. The race expresses a complex understanding of technology, seen with advanced armor, weapons, vehicles, and the art of space-faring.   Almost all Cabal technology contains an unknown black sludge which human laboratories have yet to find a way to synthesize.When killed, Cabal soldiers collapse loudly and "squirt dark oil from their livery."   If you would like to add an LED light as we did, then you can get the kit from Kitronik here.

Sam Rowan Curiosity Cabinet : Specimen 165b (Lucanidae Chiroptera. loc: Guatemala)

Complexity:2
by samrowan

Halloween Design Competition entry - Curiosity Cabinet   Specimen 165b (Lucanidae Chiroptera. loc: Guatemala) In the central part of the Northern point of the rainforest close to the Laguna El Repasto, at an elevation probably of fifty feet, I observed a pale glint of light projecting from the surface of a petrified tree. On closer inspection I saw that the light was captured and reflected by the wings of a creature, which appeared to be a horned beetle. At second glance it became apparent that the wings belonged to a far more horrifying creature of a like which I had not previously encountered. With horns protruding from the sides of its beaked head, and most curiously, mammal features such as the limbs of a common English bat, it is this specimen which I present here. print size wing to wing 20cm. use real pins to add realism. 

Thunderlord From Destiny

Complexity:4
by Kirby Downey

After making my Duke MK 44 hand cannon I tasked myself with creating this is replica model of the Thunderlord from the recently released Destiny. This model consists of 45 parts all printed with three different materials, PLA, Ninjaflex and carbon fiber. The banana is used for scale. The main body is regular PLA, the pipes, the bullet belt and the end of the butt stock is printed in ninjaflex and the site and the site rail are carbon fiber. This is one of the most well known weapons in Destiny due to it's usaged during E3. Thunderlord is an exotic machine gun. It can be obtained from a chest in the Vault of Glass raid, as a reward from the Weekly Nightfall Strike, or as an end-of-match reward from the Crucible. Thunderlord was demonstrated in Bungie's E3 2013 gameplay demo. In addition, its design and general philosophy were outlined in a brief news article on Bungie's website. The weapon crackles with visible bolts of electricity, and at higher levels uses electro-static rounds that may be unique to Thunderlord The Thunderlord discharges a salvo of electro-static rounds, shells barred due to volatility. Occasionally after scoring a kill, the enemy will burst into an AoE electrostatic effect.

Halo Magnum Gun

Complexity:2
by Alexandergargett

After a 140 years in production, the Misriah Armory has brought the M6 Magnum gun to the Public!   The M6 series weapons are recoil-operated and magazine-fed, and typically fire 12.7 x 40mm projectile ammunition. In addition to power, the M6 line of weaponry is designed to be rugged and reliable, and they remain operational after Slipspace transitions and high-g aerial maneuvers.   Assembly:    The Magnum will print in two parts, simply slot the barrel of the Magnum into the base of the handgun.

Captain Fallen Destiny

Complexity:4
by ricardoalves

My second work of the Destiny Collection was the Captain Fallen ! It comes in 11 pieces, that can be easily assembled. The Fallen are a nomadic race of four-armed bipedal humanoids. They're a species of pirates and mercenaries located on Earth and the Moon, and are of the primary antagonist race in Destiny     Read the Instructions before Printing it.

Impossible Bearings Mini

Complexity:2
by MyMiniFactory

A simple bearing model ideal for decoration or a test print for when you calibrate your printer. Looking for something more complex? Why not check out the more advance impossible bearings.

Iron Jack

Complexity:5
by Daniel Schunemann

Ironjack is a multi-pose robot model. This fantastic action figure has 59 parts which are jointed for an amazing total of 20 points of articulation. All the parts clip together to make a glue free model. Lots of new designs are in the works for TinHead and Ironjack you will be able to download new arms, heads, legs, all very soon. All pieces are compatible with Tinhead.

Guardians of the Galaxy: Star lord's Mask Version 2

Complexity:2
by soulorigin89

To everyone who downloaded the Version one of the starlord mask Big Thanks! So without further delay here is version Two. This mask comes in four sections with two lens incersts which can be incerted or used as a template to cut around depending on what material you want your lenses to be. The parts can be scaled in a thirdparty software for more precision, this will help when figuring out how to match the model to your head size. The helmet featured in the main image is scaled for a smaller person but you can see how it fits together. I reccomend printing this mask on a Z18, Ultimaker 2 or a printer with a large build volume to be able to fit all head sizes and needs.

New 3D Objects

Cuboctahedron

Complexity:1
by mugegoken

We usually study the 3D information on 2D papers and 2D screens. However for some pupils it could be difficult to transform 2D information into 3D without actually seeing them and touching them in the 3-Dimensional world. The 3D printed polyhedrons provide the pupils an opportunity to understand them easier and better as now they can see and touch them in the 3D world.This project is part of our Transforming 2D information in to 3D project. If you have any ideas what can be modeled and can not find them on our website, please email your ideas to info@MyMiniFactory.com.

Taurus Bull Mask

Complexity:3
by gtrueba

2014 Halloween Design Competition entry- Halloween Prop   Just like your ancestors, its time to worship and embody one of the boldest animals in nature with the Taurus mask. Have a friend accompany you as your matador. Ole! wear a suit and you could be the Wall st. bull Carry it around in your hand as your hunting trophy, Wear it with a toga or Greek outfit and you'll a Minotaur from Greek mythology Or just wear it on its own for an edgy and creepy costume. Recommendation: Print head and ears black, or red. print horns separate in white.

Pittsburgh Steelers Logo

Complexity:1
by rozoom

The Pittsburgh Steelers are a professional American football team based in Pittsburgh, Pennsylvania. The team currently belongs to the North Division of the American Football Conference (AFC) in the National Football League (NFL). Founded in 1933, the Steelers are the oldest franchise in the AFC. Pittsburgh has won more Super Bowl titles (six), won more AFC Championship Games (eight), and played in (fifteen) and hosted more (eleven) conference championship games than any other NFL team. The Steelers share the record for most Super Bowl appearances with the Dallas Cowboys (eight). The Steelers won their most recent championship, Super Bowl XLIII, on February 1, 2009.

Aphrodite at The Collection, Lincoln, UK

Complexity:2
by Jonathan Beck

This bust of Aphrodite, the goddess of love, pleasure and procreation, is a copy of a 2nd century roman copy of a greek sculpture by praxiteles.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Indiana Pacers Logo

Complexity:1
by Miqq

The Indiana Pacers are a professional basketball team based in Indianapolis, Indiana. They are members of the Central Division in the Eastern Conference of the National Basketball Association (NBA). The Pacers were first established in 1967 as members of the American Basketball Association (ABA) and became members of the NBA in 1976 as a result of the ABA-NBA merger. They play their home games at Bankers Life Fieldhouse. The team is named after Indiana's history with harness racing pacers as well as the Indianapolis 500's pace cars.

Screw Press Cover

Complexity:1
by andrewforster

This screw head cover push fits both phillips and flathead screws. You can now hide those unsightly screws beneath a chamfered cap that can be painted to colour match its surroundings. Perfect for DIY and decorating around the house.

Angel of Death (Hellboy)

Complexity:3
by vasiliskatsaros

This is the bust of an iconic character created by Guillermo Del Toro, Angel of Death as seen in the film Hellboy: The Golden Army (2008). The Angel of Death is a personification of death. It has no eyes on his face because its eyes are on its wings. It lives in Bethmoora and is a friend of the goblin who built the Golden Army.While searching for the Golden Army, BPRD agents also were looking to remove the spear shard in Hellboy's chest. The Angel warns Liz Sherman that Hellboy will doom humanity and she will suffer greater if he lives, Liz accepts the consequences and the Angel magically removes the shard. The Angel then disappears, leaving the shard for the goblin.   Source: Hellboy wiki page

Thunderlord From Destiny

Complexity:4
by Kirby Downey

After making my Duke MK 44 hand cannon I tasked myself with creating this is replica model of the Thunderlord from the recently released Destiny. This model consists of 45 parts all printed with three different materials, PLA, Ninjaflex and carbon fiber. The banana is used for scale. The main body is regular PLA, the pipes, the bullet belt and the end of the butt stock is printed in ninjaflex and the site and the site rail are carbon fiber. This is one of the most well known weapons in Destiny due to it's usaged during E3. Thunderlord is an exotic machine gun. It can be obtained from a chest in the Vault of Glass raid, as a reward from the Weekly Nightfall Strike, or as an end-of-match reward from the Crucible. Thunderlord was demonstrated in Bungie's E3 2013 gameplay demo. In addition, its design and general philosophy were outlined in a brief news article on Bungie's website. The weapon crackles with visible bolts of electricity, and at higher levels uses electro-static rounds that may be unique to Thunderlord The Thunderlord discharges a salvo of electro-static rounds, shells barred due to volatility. Occasionally after scoring a kill, the enemy will burst into an AoE electrostatic effect.

Tree at the Place Vendôme, Paris

Complexity:1
by Jonathan Beck

'Tree' was a large inflatable folly that was installed on the 19th October 2014 in Place Vendôme, Paris. Designed and created by Paul McCarthy, the large-scale art piece depicted a christmas tree to spread awareness of the soon approaching public holiday. It received mixed reviews because of its contemporary take on the standard christmas tree which it vaguely resembles in form; unfortunately a couple of days after it was presented to the public it was deflated and damaged by vandals; after the ordeal McCarthy refused to reinstall it and has since been removed from the square. Now all we're left with are the words of Monsieur le Président. “[France] would plunge into decline if it refused to be itself, if it was afraid of the future, afraid of the world," he added to AFP. Fortunately Scan The World had it produced so that you can download you own 'Tree' in miniature form!     This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!    

San Diego Chargers Logo

Complexity:1
by rozoom

The San Diego Chargers are a professional American football team based in San Diego, California. They have been members of the West division of the American Football Conference (AFC) in the National Football League (NFL) since 1970. The club began play in 1960 as a charter member of the American Football League, and spent its first season in Los Angeles, California before moving to San Diego in 1961. The Chargers play their home games at Qualcomm Stadium. The Chargers continue to be the only NFL team based in Southern California, with no teams in Los Angeles since 1994.

HALO ENERGY SWORD

Complexity:5
by Daniel Schunemann

“A noble and ancient weapon, wielded by the strongest of Sangheili, requires great skill and bravery to use, and inspires fear in those who face its elegant plasma blade.”— Thel 'Vadamee

Plaster bust of Alfred Tennyson at The Collection, Lincoln, UK

Complexity:1
by Jonathan Beck

A bust of Poet Lord Alfred Tennyson stands in Poets' Corner in Westminster Abbey on August 5, 2009 in London. Lord Tennyson, Poet Laureate, was born in Somersby, Lincolnshire on August 6, 1809. He died on October 6, 1892 and was buried in the Abbey on October 12th in a ceremony attended by thousands of mourners.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Golden Snitch

Complexity:3
by KennyThomsonDavies

2014 Halloween Design Competition entry- Curiosity Cabinet The Golden Snitch as seen in the Quidditch games from the Harry Potter franchise. Clip the ball bearings on the wings into the holes on the main component for moveable adjustable poses. Print wings flat, print main component with winglet holes facing up.

Horror Zombie - Halloween Costume - Full Scale

Complexity:3
by 3DCLOUD

2014 Halloween Design Competition entry- Halloween Prop   Classic, gorey zombie mask is the staple for every halloween. The undead rising from their graves and walking the earth is a common horror film setting, perfected through the years especially for halloween.    (Zip File Contains a file for the complete mask, and a mask split into several parts so you can print a full scale mask on smaller printers)

Nigerian Figurine sculpture at The Collection, Lincoln, UK

Complexity:2
by Jonathan Beck

This sculpture was presumably made in Nigeria due to his characteristic design of the country. It is a life-size totem depicting a male figure in granite. It is on permanent display at The Collection gallery in Lincoln.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Halloween Mask- Full Scale

Complexity:3
by Sosei

2014 Halloween Design Competition entry - Halloween Prop   Here a perfectly scary Halloween mask. To use either as a real mask, holes provided for wire, or as a decoration for you halloween party at home.  This design is inspired by both themes: evil clown  and  the payday game.   (Zip File Contains a file for the complete mask, and a mask split into several parts so you can print a full scale mask on smaller printers)

Blacksmith in Camden, London

Complexity:2
by Jonathan Beck

This bronze sculpture can be found near the horse stables market in Camden, London, on permanent display. The sculpture depicts a blacksmith working on a horseshoe with a hammer and nail in his hands. It is lifesize and sits in the street, welcome to interaction with passers by.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Whether that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Cyclop Mask - Halloween Costume - Full Scale

Complexity:2
by 3DCLOUD

2014 Halloween Design Competition entry- Halloween Prop   Cyclops are often found in greek mythology as giants amongst men with a singular eye in the centre of their forehead. This primordial species can be terrifying due to their freakish nature and large, muscular builds.  This mask would be a great costume changer to make any costume that little bit creepier.    (Zip File Contains a file for the complete mask, and a mask split into several parts so you can print a full scale mask on smaller printers)

Jack-O-Lantern Mask - Full Scale

Complexity:2
by fabiobautista

2014 Halloween Design Competition entry- Halloween Prop    This is an evil mask of Jack-O-Lantern. The model captures the scary look of a pumpkin creature with some unique details and nice features. It is printable in a single piece or separate parts to build the full scale mask. The perfect element for creepy halloween adventures.   (Zip File Contains a file for the complete mask, and a mask split into several parts so you can print a full scale mask on smaller printers)

Assembly at Woolwich Arsenal, London

Complexity:2
by Jonathan Beck

Embedded in all of us is the ability to recognise and read the human figure from scant visual information. In this work Burke has sought to depict a collective human presence with a series of defined spaces. Sixteen partial body moulds have been arranged as if coming together with the tightest concentration of figures in the middle of the group. The material and forms draw on the artist's early involvement with engineering practice, and an appreciation of the aesthetic properties of functional engineering construction. The cast forms have been designed to be industrially produced and repeated to reflect the use of industrial production methods , and are bolted together using the convention for the joining of castings. Each figure is suggested by three out of the possible four assembled mould sections of a body cast, allowing the viewer visual entry and an opportunity to perceive it from the outside in, as if casting ones own body. ‘Assembly’ acknowledges that there is a tension between the reading of an image of the human form and the affect that the physicality of materials and process have on that understanding. The work was conceived as an assembly of persons, of parts, and spaces, which can finally be assembled by the viewer.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Guardians of the Galaxy: Star lord's Mask Version 2

Complexity:2
by soulorigin89

To everyone who downloaded the Version one of the starlord mask Big Thanks! So without further delay here is version Two. This mask comes in four sections with two lens incersts which can be incerted or used as a template to cut around depending on what material you want your lenses to be. The parts can be scaled in a thirdparty software for more precision, this will help when figuring out how to match the model to your head size. The helmet featured in the main image is scaled for a smaller person but you can see how it fits together. I reccomend printing this mask on a Z18, Ultimaker 2 or a printer with a large build volume to be able to fit all head sizes and needs.

Truncated Cuboctahedron

Complexity:1
by mugegoken

We usually study the 3D information on 2D papers and 2D screens. However for some pupils it could be difficult to transform 2D information in to 3D without actually seeing them and touching them in the 3-Dimensional world. The 3D printed polyhedrons provide the pupils an opportunity to understand them easier and better as now they can see and touch them in the 3D world.This project is part of our Transforming 2D information in to 3D project. If you have any ideas what can be modeled and can not find them on our website, please email your ideas to info@MyMiniFactory.com.

brain box for the minecraft creeper anatomy

Complexity:1
by Kirby Downey

This is a little hidden compartment which can hold jewelry, coins or anything that can fit in it, slides straight into the skull of the creeper hiding it! Its a great place for any Minecraft fan to hide thier trinkets!  The MineCraft creeper anatomy can be downloaded here

A Muse at the British Museum, London

Complexity:2
by Jonathan Beck

This 19th Century bust of a woman, titled 'A Muse' can be found in the British Museum's permanent collection. Not much is known about this sculpture but from the costume and leaf headdress that she wears it can be suggested that she is of a higher class or even goddess, possibly Isis.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Whether that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

ring

Complexity:
by Stefanos

Multiple pics for the desing of this  ring to see the details in for the b9 creator and Asiga.that are DLP resin machine Made in 3ds max and zbrush

Sheldonian Bust in Oxford, UK

Complexity:2
by Jonathan Beck

Lining the fences of the Sheldonian in Oxford are a series of 13 square pillars toppted by head-and-shoulder busts marking its front boundary. The official name for such heads is “herms”; the original accounts describe these heads as “termains”; and some people call them philosophers. But Max Beerbohm in Zuleika Dobson called them “Emperors”, and that is the name that has stuck. Each head shows a different type of beard. The present heads are the third set. The first set lasted 200 years, but by 1868 they were crumbling and new ones were erected; undergraduates, however, daubed these in paint, and the harsh cleaning they received caused them to wear badly, so that they could be described by John Betjeman (in his verse autobiography Summoned by Bells) as “the mouldering busts round the Sheldonian” when he came up in 1925.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Whether that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Alfred Tennyson Bust at The Collection, Lincoln, UK

Complexity:1
by Jonathan Beck

This 19th Century bust by Thomas Woolner depicts Alfred Tennyson a Poet Laureate of Great Britain and Ireland during much of Queen Victoria's reign and remains one of the most popular British poets. Tennyson excelled in penning short lyrics, such as "Break, Break, Break", "The Charge of the Light Brigade" and "Crossing the Bar". Much of his verse was based on classical mythological themes, such as Ulysses. This lifesize bust depicts Tennyson, playing homage to his achievements. It was scanned at The Collection gallery in Lincoln.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

The Bodhisattva Tara at the British Museum, London

Complexity:2
by Jonathan Beck

Tara,  Bodhisattva Tara, or Ārya Tārā, also known as Jetsun Dolma in Tibetan Buddhism, is a female Bodhisattva in Mahayana Buddhism who appears as a female Buddha in Vajrayana Buddhism. She is known as the "mother of liberation", and represents the virtues of success in work and achievements. Tara is a tantric meditation deity whose practice is used by practitioners of the Tibetan branch of Vajrayana Buddhism to develop certain inner qualities and understand outer, inner and secret teachings about compassion and emptiness. Tara is actually the generic name for a set of Buddhas or bodhisattvas of similar aspect. These may more properly be understood as different aspects of the same quality, as bodhisattvas are often considered metaphors for Buddhist virtues.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Whether that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Truncated Cuboctahedron

Complexity:1
by mugegoken

We usually study the 3D information on 2D papers and 2D screens. However for some pupils it could be difficult to transform 2D information in to 3D without actually seeing them and touching them in the 3-Dimensional world. The 3D printed polyhedrons provide the pupils an opportunity to understand them easier and better as now they can see and touch them in the 3D world.This project is part of our Transforming 2D information in to 3D project. If you have any ideas what can be modeled and can not find them on our website, please email your ideas to info@MyMiniFactory.com.

Beastman Shaman

Complexity:3
by JiiJii

This piece has taken it's inspiration from a Beastman Shaman and is seen to be controlling the element of fire. The model is made of two parts with the left arm being seperated from the model with a joint so that it can move freely from the main body.

LED Skull Clip

Complexity:2
by SebastianKerner

2014 Halloween Design Competition entry - Costume Prop   The LED Skull Clip is a neat Halloween Costume accessory. It has a clip on its back, with which you'll be able to apply it to any part of your clothes. Under the clip there is a hidden compartment. This space can be used for electronics, with which the skull can be lit up and shine into the dark halloween night.

Penelope at the Robert Hull Fleming Museum, Vermont, USA

Complexity:3
by Jonathan Beck

Sculpted out of marble in 1891 by Franklin Simmons, Penelope is a sculpture finely executed in a Renaissance, classical style. In Homer's Odyssey, Penelope is the faithful wife of Odysseus, who keeps her suitors at bay in his long absence and is eventually reunited with him. Her name has traditionally been associated with marital faithfulness, and so it was with the Greeks and Romans, but some recent feminist readings offer a more ambiguous interpretation.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Oscar Wilde Modern Sculpture in Reading, UK

Complexity:1
by Jonathan Beck

This geometric sculpture presented to the city of Reading in the 20th Century contains a series of spheres and columns. Each ball has the detail of faces and the columns are enscribed with smaller shape carvings. Its common name amongst locals is 'Oscar Wilde's Balls', titled to celebrate the life and achievements of the late poet and author. This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Plug Socket Stash Box

Complexity:2
by Reg

A secret hiding place. Who would think of looking in a wall socket? Hide money, jewels or any other small item of value. 3 wall depths available - 20mm, 40mm and 60mm. Just glue the insert into your cutout and slide the socket into place. Comes in British and European faceplates. 

Centauro at Canary Wharf, London

Complexity:4
by Jonathan Beck

Igor Mitoraj’s Centauro shows the great mythological beast of the centaur, which is depicted partially incomplete but ready for battle. The sculpture was made and installed in 1984 and is on permanent display in the public area of Montgomery Square in Canary Wharf.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Fountain in Lodz, Poland

Complexity:4
by Jonathan Beck

This ornate fountain depicts two children with a fish coiling around the base. It was photographed by Kris in Lodz, Poland   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Whether that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Capped Screw Cover

Complexity:1
by andrewforster

This screw head cover is perfect for hiding unsightly screws, while maintaining accessability in case you need to loosen or tighten the screw afterwards. Another one for the DIY collection.

Aku Aku Tiki Mask (Full Size)

Complexity:3
by fredsena

Aku Aku is Crash Bandicoots guardian angel from the massively popular Crash Bandicoot series that first launched in 1996. He is said to be a human spirit reincarnated as a mask. Although he doesn't speak much, many will remember his catch phrase "Hooga-Booga" from the original games. This mask would look great as a wall decoration, scaled down as a trinket or worn as intended, as a mask. Great for halloween or a fancy dress party. 

Mjölnir (Thor's Hammer)

Complexity:4
by Reg

Super awesome replica of Thors Hammer from the hollywood movie franchise. Perfect for cosplay, halloween or as a wall decoration in your man (or woman) cave. Based on Norse mythology, Thor is the god associated with thunder and his Hammer is one of the most feared weapons capable of flattening mountains and clearing vast spaces.  The design is supplied in sections to be printable full size and as a solid piece - which is better for small scale prints.

Hippopotamus at the Natural History Museum, London

Complexity:2
by Jonathan Beck

This model is a male hippopotamus; male hippopotamuses are generally larger and more heavily built than females. Males fight spectacular battles in water. Roaring loudly, they ram their open jaws at each other and clash their huge canines- sometimes inflicting deep wounds. Hippopotamuses have been known to take on crocodiles and sharks. They deposit large quantities of extrement in water. this 'fertilizer' is vital for the growth of water plants- the food of other animals. This model can be found at the Natural History Museum in South Kensington, London This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Aged Whitetail Deer Skull Helm

Complexity:2
by austinkbutler

2014 Halloween Design Competition entry- Halloween Prop   This whitetail deer skull was captured through a scan I did a year ago, then molded into a helmet that fits atop your forehead. This is a must have for anyone preparing for ground combat if you want that intimidation factor. Just think, Robert Baratheon himself wore a similar helm during the Battle of the Trident! The scale should be adjusted for your individual size, and I'd probably print this with some good support or on the model. Just remember that this helm is not intended to stop any kind of impact, weapon, projectile, war hammer, or any other attack meant to crush, pierce, or slice your skull. valar morghulis.

Stanisław Staszic sculpture in Lodz, Poland

Complexity:3
by Jonathan Beck

Stanisław Wawrzyniec Staszic [staˈniswaf ˈstaʂit͡s] (6 November 1755 – 20 January 1826) was a leading figure in the Polish Enlightenment: a Catholic priest, philosopher, geologist, writer, poet, translator and statesman. A physiocrat, monist, pan-Slavist (after 1815) and laissez-fairist, he supported many reforms in Poland. He is particularly remembered for his political writings during the "Great (Four-Year) Sejm" (1788–92) and for his support of the Constitution of 3 May 1791, adopted by that Sejm. He co-founded the Warsaw Society of Friends of Learning (precursor to the Polish Academy of Sciences), of which he became president. He served as a member of the State Council of the Duchy of Warsaw and as minister of trade and industry in Congress Poland. Staszic is seen as the father of Polish geology, statistics, sociology, Tatra Mountains studies and exploration, mining and industry. The larger than life sculpture depicts him standing upon a podium, made in the 19th Century   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Airbrush Stand

Complexity:1
by Kirby Downey

This is a simple stand for a simple hobby airbrush, a great tool for painting your awesome 3D prints!

Queen Charlotte Sculpture at Queen Park, London

Complexity:2
by Jonathan Beck

The statue of Queen Charlotte, previously thought to be that of Queen Anne, and believed to have been erected in 1775, is made of lead, once common for statues, but which passed out of use by Victorian times, apart from its use in ornamental garden statues, something of a fashion in the later 18th Century, and revived periodically later on. It is an attractive material, giving a white cast where the light falls, and looking blueish or blackish or almost beige depending on the light; very different in aspect from bronze. Being soft and heavy, it allows for fine detail, but tends to slump under its own weight, so that as well as internal support, lead statues tend to need external support too, hence the short pillar supporting the drapery on the Queen’s arm, and the solidity of the lower figure.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

IPhone 6 plus golden cover

Complexity:1
by Michele Badia

The iPhone 6 and iPhone 6 Plus are iOS smartphones designed and manufactured by Apple Inc. Unveiled on September 9, 2014, the devices jointly serve as a successor to the iPhone 5S. The iPhone 6 series includes a number of major changes over its predecessor, including a streamlined design, models with larger 4.7-inch and 5.5-inch displays, a faster processor, upgraded cameras, improved LTE and Wi-Fi connectivity, and support for a near-field communications-based mobile payments offering .  https://www.apple.com/uk/iphone-6/ IPhone 6 plus golden cover, ispired by the fairphone cover case!

Halloween Pumpkin - Candle Holder

Complexity:1
by 28.Labels

Embrace the Halloween season with this decorative halloween tea light holder. Bringing halloween to the realm of 3D printing. Keep your technology spooky this Halloween

King George IV Equestrian Sculpture at Trafalgar Square, London

Complexity:4
by Jonathan Beck

The statue of George IV in Trafalgar Square, London, is a bronze equestrian statue by Sir Francis Legatt Chantrey. It depicts the King dressed in ancient Roman attire and riding bareback.[1] The sculpture was originally designed to sit on top of the Marble Arch at the entrance to Buckingham Palace, but was placed in its current location following the King's death.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Vorpal blade from Alice: Madness Returns

Complexity:2
by Kirby Downey

This is a replica of the blade used by alice in Alice the Madness Returns, A dark version of the old tale of alice in wonderland. Alice: Madness Returns is a psychological survival horror action-adventure video game developed by Chinese studio Spicy Horse and released by Electronic Arts for the Microsoft Windows, PlayStation 3 and Xbox 360. It is the sequel to the 2000 video game American McGee's Alice.   The Vorpal Blade is swift and keen, and always ready for service. The Vorpal Blade is Alice Liddell's primary weapon. This model was printed on a Zortrax M200 machine, they are available for purchase here. This machine allowed for amazing fine detail with a simple machine.  

Assembly Blocks

Complexity:1
by andrewforster

This assembly block is intended for assembling MDF or Chipboard panels at 90 degrees. Commonly used in flat pack furniture and kitchen cabinet constructions for their ability to slot together with ease without the need for glue or clamps. This is a perfect replacement for a lost piece, or print enough of them and all you need is the bolts/screws.

Healer Buddha at the British Museum, London

Complexity:2
by Jonathan Beck

The Buddha sits in the position of meditation, holding a myrobalan in his hand. This fruit has medicinal properties and identifies the Buddha as a healer. The size of the figure testifies to the great skill of the Burmese lacquer craftsmen. It is larger than life and is make out of dry lacquer, gilding paint, shell-inlay and wood Burma. Made in the late 18th or earth 19th Century.   This object is part of the Scan The World initiative, a project attempting to archive as many art sculptures and monuments from around the world as possible. Either that be from the street, galleries or museums, we are always looking for new statues and models to be scanned. Submit your photographs to us at stw@myminifactory.com!

Featured Designers

Andrew Coyne

User: andrewcoyne (United Kingdom)

Andrew Coyne

Views:
4628

Ricardo Alves

User: ricardoalves (United Kingdom)

<p>Professional 3D Designer and Space traveler</p>

Ricardo Alves

Views:
65391

Daniel Schunemann

User: Daniel Schunemann (United Kingdom)

<p>Over five years of industry experience in VFX industry. Experienced in Zbrush, 3DS max, and Maya.</p>

Daniel Schunemann

Views:
66363

Fynn Große-Bley

User: fynngro (United Kingdom)

Fynn Große-Bley

Views:
8656

Jack Imakr

User: jackimakr (United Kingdom)

<p>iMakr design engineer</p>

Jack Imakr

Views:
82565

Bruce Chaput

User: bruceeckerput

Bruce Chaput

Views:
4083

Andrew Forster

User: andrewforster (United Kingdom)

<p>Hi, welcome to my profile.</p> <p><br />I like to design a wide range of objects, from the mechanical/functional to artistic. I've been building up my 3D design experience using Blender, which provides a wide range of design options, since about September 2013.</p> <p>Designing for the MyMiniFactory website has really helped me refine my working methods and habits, such that I feel I have really improved since I started.</p>

Andrew Forster

Views:
13580

Kirby Downey

User: Kirby Downey (United Kingdom)

<p>I am a product designer from South Africa, currently based in London. I take product design and add a technical and mechanical side to it, first making it work technically and mechanically before adding a story to the product using shapes and forms. I enjoy working with my hands, completing each project my self and with each product I take special care to ensure that every detail is perfect. I have a passion for 3D printing and the capabilities it has in today's world. Email: kirby @ myminifactory.com Twitter: @KjDesigns365 Facebook: www.facebook.com/kjdesigners</p>

Kirby Downey

Views:
94348

Leon Alexander Single

User: LeonSingle (United Kingdom)

Jonathan Beck

User: Jonathan Beck (United Kingdom)

Jonathan Beck

Views:
52839

Gyrobot

User: stevegyrobot (United Kingdom)

<p>I am a mechanical CAD design engineer specialising in automotive, aerospace and nuclear fusion. If you like any of my designs, please consider a Bitcoin donation : 1EMSyo5ha9HrAtyhJk1dKVPSwMGQrpULJ1</p>

Gyrobot

Views:
8637

XYZ Workshop

User: xyzworkshop (United Kingdom)

XYZ Workshop

Views:
13362

Adam Beamish

User: adambeamish (United Kingdom)

Adam Beamish

Views:
4338

Reg Taylor

User: Reg (United Kingdom)

<p>Free Lance design engineer, studied in Oxford, worked for Oxford university before moving to France in1992. Worked for a company designing machines for special purposes in the Haut Couture then moved to a design office nearer home. Have been designing and printing prototype pieces for over 1 year, can work with ABS, PLA, Nylon plus other filaments. Able to print objects 220 x250 x200 mm in size. I accept design and print jobs, and can deliver world wide. Have a look at my photo's on flicker.</p>

Reg Taylor

Views:
4057

DesignerFred

User: designerfredthibaud (United Kingdom)

DesignerFred

Views:
13677

Matt Bagshaw

User: mattbagshaw (United Kingdom)

<p>I'm a 3D Art professional working in video games. I'm a big fan of 3D printing and very excited about the future!</p>

Matt Bagshaw

Views:
6254

Elliott Viles

User: soulorigin89 (United Kingdom)

<p>London based 3D designer & 3D scanning specialist with a keen interest in prop design. Check out my 3D printing on instagram SOULORIGIN89! Online Portfolio Link below.

Elliott Viles

Views:
101040

Drew Morgan

User: drewtm (United States)

<p>I'm a mechanical engineer and designer in Tulsa, Oklahoma.</p>

Drew Morgan

Views:
8577

Michele Badia

User: Michele Badia (United Kingdom)

My name is Michele I am 31 years old Italian guy, and an official My Mini Factory designer. I have a strong passion for fashion and i really do like designing shoes especially 3D printed shoes. I like music, movies, and as a good Italian i really do like nice food :) Ciao! Info: Michele@myminifactory.com

Michele Badia

Views:
110042

Josiah Allen-Litchmore

User: josiahsal (United Kingdom)

Hunka Tibor

User: humanti (United Kingdom)

<p>Scan the cultural heritage of my profession. My goal is to make more art into the public domain. Jewelry design is unusual stones and parts. Frame samples are retained and reproduced.</p>

Hunka Tibor

Views:
12980

Ben Martin

User: Benny Normal (United Kingdom)

<p>3D Artist and Designer</p>

Ben Martin

Views:
4404

franc falco

User: francfalco (United Kingdom)

<p>Graphic designer. 3D modeller</p>

franc falco

Views:
5265

Marco Valenzuela

User: marco valenzuela (United States)

<p>Working as a freelance CG artist in the video game and VFX industry since 2004 my interest in 3d printing was kicked off in 2007 with various prop and product design projects. Now the majority of my work in 3d printing centers around custom jewelry and product design. As an early adopter I am fortunate to have worked with many additive manufacturing technologies including SLA, SLS, DMLS, DLP, Polyjet, and FDM. Sculpting and conceptualizing since a very early age I consider myself part sculptor and part inventor. My personal designs range from the whimsical to the mechanical. They can be a mix of form and function or purely aesthetic. I have always possessed an unstoppable entrepreneurial drive and invest everything my talents earn me into enjoying life with my beautiful wife of 14 years.</p>

Marco Valenzuela

Views:
17351

Felipe Pinzón Mallol

User: felipepinz (United Kingdom)

3DRegan

User: michaelaregan (United Kingdom)

3DRegan

Views:
38072

alan stanford

User: alanstanford (United Kingdom)

<p>40 years experience in product and machinery design.</p>

alan stanford

Views:
18754

Terry Smith

User: terrysmith (United Kingdom)

<p>Pixelseppa Tampere</p>

Terry Smith

Views:
22911

Fabio Bautista

User: fabiobautista (United Kingdom)

Fabio Bautista

Views:
9279

Richard Fairhead

User: JiiJii (United Kingdom)

Richard Fairhead

Views:
556

Stewart Davies

User: Stewart Davies (United Kingdom)

<p>I'm a product design graduate who studied in Edinburgh with a mind for destroying perfectly good products and using them to make other reasonably good products. I've used a bunch of 3D printers in the past and continue to keep an eye on the field for interesting developments. My main concern when designing new objects is it's function and then once I have that sorted out I start to make it pleasing for humans, this more or less goes to plan. You can find some of my work on my website - www.stewart-davies.co.uk or on my deviantart profile - http://turnip-stew.deviantart.com</p>

Stewart Davies

Views:
11652
Report a problem