Vacuum Cleaner Attachment
11,532
views
941
downloads
8
collections
0 comments
Loading comments...
Vacuum Cleaner Attachment
3D
Published 2015-01-28T13:58:16+00:00
157
0
Add to Collection
Description
This is a spare attachment for your vacuum cleaner nozzle.
A useful crevice too for cleaning corners and tight spots, shown here attached to a Henry Hoover.
I designed this as I had lost the original - here for you to print your own if you've had the same problem, but also good to have as a spare!
Printing Details
Print the attachment vertically with the circular end on the print bed.
I recommend around 25% infill to give the part some strength for durability in use.
The part will print completely support free, but I would advise adding a brim around the base in your slicing software to prevent the print detaching due to the small surface area in contact with the bed.
Technical Information
Date published | 28/01/2015 |
Time to do | 60 - 180 minutes |
Material Quantity | 39 grams |
Dimensions | 40mm x 40mm x 166mm |
Complexity | Very Easy |
Support Free | YES |
More Information
Object Parts