daprofessa's Print of Starcraft Protoss wall symbol
Community Print 3D Print of Starcraft Protoss wall symbol
Published 2018-05-20T16:28:41+00:00
10
0
Printed on: Wanhao Duplicator i3 PLUS
Material: PLA
Description
Printed at roughly 150% size (approx. 222mm x 114mm), in glow-in-the-dark (blue) PLA. Used a layer height of 0.1mm and an infill of 20% (you could use much less easily, but more material means better/longer glowing).