A Magical Wizards' Christmas by Raging Heroes
Created by
-
$ 57,695
raised
-
964
pioneers
Campaign Closed: Tue, January 05, 2021 at 12:00 AM GMT
HeroesInfiniteByRagingHeroes
- Pledges (9)
- Add-ons (0)
-
$57,695.00
raised
-
964
pioneers
Tiers
91 pioneers
USD 1.00
Gothic Ball Test
Oh! Oh! Oh!
Here is the test Gothic Ball from the Magical Wizard Christmas by Raging Heroes, which will end
on december the 11th (and files will be shipped the 12th!!!)! Don't miss out on our 150+
Christmas theme Stl collections and get the whole family involved!
Link to the CROWD FUNDING page: https://www.ragingheroes.com/pages/wizardschristmas
You'll find 3 files, the unsupported model, the lychee project file
pre-supported and the the stl file presupported.
If you want to edit the supports we'va provided use the LYS file opening it wih Lychee slicer :).
you can find it here: https://lychee.mango3d.io
Here are a few basic advice for printing:
-Lift speed must be be lower than 50
-Better to be over exposed and print that under exposed and fail.
While removing the support provided make sure to remove the internal supports from below
they can be pulled from the large hole in the bottom.
For tips and help or just for showcasing your printing/painting jobs join our facebook group
( https://www.facebook.com/groups/627772854621576 )
And all the team wish you the best Christmas!!! :D
Happy Printing!
Not sure yet? Pledge only $1 with this APPRENTICE Pledge! A retail value of $2.50. This ball is available in ALL the pledges: it will show in your account immediately. File comes both supported AND unsupported and under license. As per our terms and conditions, files cannot be resold nor can they be used to print items to be resold. Item needs to be 3D printed then decorated.
0 pioneers
USD 55.00
Conjurer pledge item collection
A lovely sampling of beautiful ready-to-3D print-items from most categories.
Includes 44 magical items in both supported and unsupported format.
A lovely sampling of beautiful ready-to-3D print-items from most categories, as featured in our Conjurer image. A retail value of $67. Includes 44 magical both supported AND unsupported and under license. As per our terms and conditions, files cannot be resold nor can they be used to print items to be resold. Items need to be 3D printed, some may require assembly, then decorated. Some supported files wont be ready until Dec 16th
112 pioneers
USD 79.00
Wizard pledge Non supported (Includes Stretch Goals) V5 (final)
Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) in an NON SUPPORTED STL format
PLUS you get ALL the STRETCH GOALS unlocked during the campaign
Supported Wizard Level (Includes Stretch Goals) V6 (Revised 2022)
Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) PLUS you get ALL the STRETCH GOALS unlocked during the campaign
in a SUPPORTED STL format and LYS format
→ This is the one you want: Over 150 objects with a retail value of $410. Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) PLUS you get ALL the STRETCH GOALS unlocked during the campaign for just $4 more than the Sorcerer Pledge, a $410 in Retail Value. Files come both supported AND unsupported and under license. As per our terms and conditions, files cannot be resold nor can they be used to print items to be resold. Items need to be 3D printed, some may require assembly, then decorated. Note: Some supported files are still under construction so the pack for supported files will be updated frequently during the week of Dec. 15.
3 pioneers
USD 49.00
Gothic Ball Test
Oh! Oh! Oh!
Here is the test Gothic Ball from the Magical Wizard Christmas by Raging Heroes, which will end
on december the 11th (and files will be shipped the 12th!!!)! Don't miss out on our 150+
Christmas theme Stl collections and get the whole family involved!
Link to the CROWD FUNDING page: https://www.ragingheroes.com/pages/wizardschristmas
You'll find 3 files, the unsupported model, the lychee project file
pre-supported and the the stl file presupported.
If you want to edit the supports we'va provided use the LYS file opening it wih Lychee slicer :).
you can find it here: https://lychee.mango3d.io
Here are a few basic advice for printing:
-Lift speed must be be lower than 50
-Better to be over exposed and print that under exposed and fail.
While removing the support provided make sure to remove the internal supports from below
they can be pulled from the large hole in the bottom.
For tips and help or just for showcasing your printing/painting jobs join our facebook group
( https://www.facebook.com/groups/627772854621576 )
And all the team wish you the best Christmas!!! :D
Happy Printing!
Conjurer pledge item collection
A lovely sampling of beautiful ready-to-3D print-items from most categories.
Includes 44 magical items in both supported and unsupported format.
A lovely sampling of beautiful ready-to-3D print-items from most categories, as featured in our Conjurer image. A retail value of $67. Includes 44 magical items in both supported and unsupported format.
0 pioneers
USD 70.00
Sorcerer pledge item collection Not Supported
120 items as shown in the SORCERER Pledge image. Include all 44 items from the Conjurer Pledge + 76 additional ones.
Supported Wizard Level (Includes Stretch Goals) V6 (Revised 2022)
Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) PLUS you get ALL the STRETCH GOALS unlocked during the campaign
in a SUPPORTED STL format and LYS format
Gothic Ball Test
Oh! Oh! Oh!
Here is the test Gothic Ball from the Magical Wizard Christmas by Raging Heroes, which will end
on december the 11th (and files will be shipped the 12th!!!)! Don't miss out on our 150+
Christmas theme Stl collections and get the whole family involved!
Link to the CROWD FUNDING page: https://www.ragingheroes.com/pages/wizardschristmas
You'll find 3 files, the unsupported model, the lychee project file
pre-supported and the the stl file presupported.
If you want to edit the supports we'va provided use the LYS file opening it wih Lychee slicer :).
you can find it here: https://lychee.mango3d.io
Here are a few basic advice for printing:
-Lift speed must be be lower than 50
-Better to be over exposed and print that under exposed and fail.
While removing the support provided make sure to remove the internal supports from below
they can be pulled from the large hole in the bottom.
For tips and help or just for showcasing your printing/painting jobs join our facebook group
( https://www.facebook.com/groups/627772854621576 )
And all the team wish you the best Christmas!!! :D
Happy Printing!
You get ready-to-3D-print files for 120 items as shown in the SORCERER Pledge image. Include all 44 items from the Conjurer Pledge + 76 additional ones. A retail value of $260. This level does NOT include Stretch Goals that will be unlocked during the campaign. Files come both supported AND unsupported and under license. As per our terms and conditions, files cannot be resold nor can they be used to print items to be resold. Items need to be 3D printed, some may require assembly, then decorated.
727 pioneers
USD 75.00
Gothic Ball Test
Oh! Oh! Oh!
Here is the test Gothic Ball from the Magical Wizard Christmas by Raging Heroes, which will end
on december the 11th (and files will be shipped the 12th!!!)! Don't miss out on our 150+
Christmas theme Stl collections and get the whole family involved!
Link to the CROWD FUNDING page: https://www.ragingheroes.com/pages/wizardschristmas
You'll find 3 files, the unsupported model, the lychee project file
pre-supported and the the stl file presupported.
If you want to edit the supports we'va provided use the LYS file opening it wih Lychee slicer :).
you can find it here: https://lychee.mango3d.io
Here are a few basic advice for printing:
-Lift speed must be be lower than 50
-Better to be over exposed and print that under exposed and fail.
While removing the support provided make sure to remove the internal supports from below
they can be pulled from the large hole in the bottom.
For tips and help or just for showcasing your printing/painting jobs join our facebook group
( https://www.facebook.com/groups/627772854621576 )
And all the team wish you the best Christmas!!! :D
Happy Printing!
Wizard pledge Non supported (Includes Stretch Goals) V5 (final)
Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) in an NON SUPPORTED STL format
PLUS you get ALL the STRETCH GOALS unlocked during the campaign
Supported Wizard Level (Includes Stretch Goals) V6 (Revised 2022)
Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) PLUS you get ALL the STRETCH GOALS unlocked during the campaign
in a SUPPORTED STL format and LYS format
→ This is the one you want! Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) PLUS you get ALL the STRETCH GOALS unlocked during the campaign for just $5 more than the Sorcerer Pledge! Up to $410 in Retail Value. Get ready to see this 120 number climb up at no extra cost beyond your pledge!!! Check out the Stretch Goals image daily to see what gets unlocked and added to your pledge at no extra cost! Files come both supported AND unsupported and under license. As per our terms and conditions, files cannot be resold nor can they be used to print items to be resold. Items need to be 3D printed, some may require assembly, then decorated.
45 pioneers
USD 1.00
Gothic Ball Test
Oh! Oh! Oh!
Here is the test Gothic Ball from the Magical Wizard Christmas by Raging Heroes, which will end
on december the 11th (and files will be shipped the 12th!!!)! Don't miss out on our 150+
Christmas theme Stl collections and get the whole family involved!
Link to the CROWD FUNDING page: https://www.ragingheroes.com/pages/wizardschristmas
You'll find 3 files, the unsupported model, the lychee project file
pre-supported and the the stl file presupported.
If you want to edit the supports we'va provided use the LYS file opening it wih Lychee slicer :).
you can find it here: https://lychee.mango3d.io
Here are a few basic advice for printing:
-Lift speed must be be lower than 50
-Better to be over exposed and print that under exposed and fail.
While removing the support provided make sure to remove the internal supports from below
they can be pulled from the large hole in the bottom.
For tips and help or just for showcasing your printing/painting jobs join our facebook group
( https://www.facebook.com/groups/627772854621576 )
And all the team wish you the best Christmas!!! :D
Happy Printing!
Not sure yet? Pledge only $1 with this APPRENTICE Pledge! A retail value of $2.50. This ball is available in ALL the pledges: it will show in your account immediately. File comes both supported AND unsupported and under license. As per our terms and conditions, files cannot be resold nor can they be used to print items to be resold. Item needs to be 3D printed then decorated.
51 of 51 pioneers
USD 69.00
Gothic Ball Test
Oh! Oh! Oh!
Here is the test Gothic Ball from the Magical Wizard Christmas by Raging Heroes, which will end
on december the 11th (and files will be shipped the 12th!!!)! Don't miss out on our 150+
Christmas theme Stl collections and get the whole family involved!
Link to the CROWD FUNDING page: https://www.ragingheroes.com/pages/wizardschristmas
You'll find 3 files, the unsupported model, the lychee project file
pre-supported and the the stl file presupported.
If you want to edit the supports we'va provided use the LYS file opening it wih Lychee slicer :).
you can find it here: https://lychee.mango3d.io
Here are a few basic advice for printing:
-Lift speed must be be lower than 50
-Better to be over exposed and print that under exposed and fail.
While removing the support provided make sure to remove the internal supports from below
they can be pulled from the large hole in the bottom.
For tips and help or just for showcasing your printing/painting jobs join our facebook group
( https://www.facebook.com/groups/627772854621576 )
And all the team wish you the best Christmas!!! :D
Happy Printing!
Supported Wizard Level (Includes Stretch Goals) V6 (Revised 2022)
Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) PLUS you get ALL the STRETCH GOALS unlocked during the campaign
in a SUPPORTED STL format and LYS format
Wizard pledge Non supported (Includes Stretch Goals) V5 (final)
Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) in an NON SUPPORTED STL format
PLUS you get ALL the STRETCH GOALS unlocked during the campaign
→ GRAB it NOW! Only 50 pledges! Up to $410 in Retail Value. Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) PLUS you get ALL the STRETCH GOALS unlocked during the campaign! The Wizard Pledge INCLUDES all Stretch Goals that we will unlock during the campaign. The Stretch Goals are ready to go and we know that with your help, we'll be unlocking a bunch of them! So, in all honesty, this is the one to get! Check out the Stretch Goals image daily to see what gets unlocked and added to your pledge at no extra cost! Files come both supported AND unsupported and under license. As per our terms and conditions, files cannot be resold nor can they be used to print items to be resold. Items need to be 3D printed, some may require assembly, then decorated.
334 pioneers
USD 71.00
Gothic Ball Test
Oh! Oh! Oh!
Here is the test Gothic Ball from the Magical Wizard Christmas by Raging Heroes, which will end
on december the 11th (and files will be shipped the 12th!!!)! Don't miss out on our 150+
Christmas theme Stl collections and get the whole family involved!
Link to the CROWD FUNDING page: https://www.ragingheroes.com/pages/wizardschristmas
You'll find 3 files, the unsupported model, the lychee project file
pre-supported and the the stl file presupported.
If you want to edit the supports we'va provided use the LYS file opening it wih Lychee slicer :).
you can find it here: https://lychee.mango3d.io
Here are a few basic advice for printing:
-Lift speed must be be lower than 50
-Better to be over exposed and print that under exposed and fail.
While removing the support provided make sure to remove the internal supports from below
they can be pulled from the large hole in the bottom.
For tips and help or just for showcasing your printing/painting jobs join our facebook group
( https://www.facebook.com/groups/627772854621576 )
And all the team wish you the best Christmas!!! :D
Happy Printing!
Supported Wizard Level (Includes Stretch Goals) V6 (Revised 2022)
Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) PLUS you get ALL the STRETCH GOALS unlocked during the campaign
in a SUPPORTED STL format and LYS format
Wizard pledge Non supported (Includes Stretch Goals) V5 (final)
Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) in an NON SUPPORTED STL format
PLUS you get ALL the STRETCH GOALS unlocked during the campaign
→ GRAB it NOW! Pledge goes away on Dec.6@3AM GMT. Up to $410 in Retail Value. Contains ALL that's in the Sorcerer pledge (3D print files for 120 objects) PLUS you get ALL the STRETCH GOALS unlocked during the campaign! The Wizard Pledge INCLUDES all Stretch Goals that we will unlock during the campaign. The Stretch Goals are ready to go and we know that with your help, we'll be unlocking a bunch of them! So, in all honesty, this is the one to get! Check out the Stretch Goals image daily to see what gets unlocked and added to your pledge at no extra cost! Files come supported AND unsupported and under license. As per our terms and conditions, files cannot be resold nor can they be used to print items to be resold. Items need to be 3D printed, some may require assembly, then decorated.
Psssstt! View the latest Updates to the Campaign!
What if you and your family could spend Christmas in a Wizards’ School?
What if you could own and gift a Wizards’ arcane artefacts?
What if you could trim your house with all manners of enchanted ornaments?
What if you could metamorphose your table with food fit for a magical feast?
And what if you could cast a spell on your 3D printer and suddenly print all the enchanted artefacts, curiosities, gifts, and miniatures that Wizards usually keep for themselves?
For A Wizards' Christmas, we took a deep dive into the most precious artefacts of kings and queens of medieval times as well as those belonging to the emperors of czarist Russia.
We recreated and re-interpreted these beautiful curiosities and imprinted them with the feel of your favourite Fantasy settings.
And we made them so that every one in the family could find something they like.
Thanks to the magic of your 3D printer, this is a very unique opportunity to bring forth treasures that would otherwise cost hundreds if not thousands of Euros.
But more importantly, it's the opportunity to round up family and friends to share priceless moments: print, paint, decorate, play, and create cherished memories together.
We've kept it very simple, with 3 key pledges:
- CONJURER: 44 object files for $49 USD. A retail value of $64.
- SORCERER: 120 object files for $70 USD. A retail value of $260..
- WIZARD: 120 object file PLUS all Unlocked Stretch Goals: Only $75 USD. Full expected retail value: up to $410 !!!.
The Wizard Pledge includes all Stretch Goals that we will unlock during the campaign. The Stretch Goals are ready to go and we know that with your help, we'll be unlocking a bunch of them! So, in all honesty, this is the one to get! So CLICK on that Pledge button on top of the page to get in on this time-limited project.
What we offer
STL files for home 3D printing!
Print for your family use as many items as you want.
Your kids love the tiara, and their cousins too? Go ahead and print it 5 times!
Need to make some objects smaller or bigger? You can do that too!
This project offers over a personal, non-transferable, license of ready-to-3D print STL files provided in 2 formats: supported and non-supported. Pledging to the campaign and downloading the files means that you automatically accept the terms of our license.
Once your objects are printed
Once you have printed and cleaned your items, the whole family will want to get involved: paint them, spray them with snow or colour, decorate them, add texture...
The possibilities are endless.
And then there are the cookie cutters. You will create awesome cookie shapes. More importantly, you will use some of them to build cookie castles! We will share info on how to get this done during the campaign.
Keep in mind that these are not toys but collectible objects. It is your responsibility to keep the youngest ones from eating the smaller items and/or sticking them anywhere they shouldn't!
Artefacts of Bygone Marvels
Crafted in mysterious ways those mechanical devices are the perfect companion of any master magician. This artefacts will open at the right moment to show their hidden secrets.
Globes of Gothic Adornment
Imbued by the spirit of the gothic artisans this globes will decorate your tree by themselves or even light it if you put a led inside them.
Christmas Adventurers
In Raging Heroes we love miniatures and, of course, we love christmas so we decided to wave our wands and create a christmas versions of some of our characters.
Winter Spheres of Distant Travel
Great wizards use this orbs to transport their thoughts to places far away.
Charms of Polyhedral Luck
Miss your Role Playing Sessions in this strange 2020 ? Show your geek pride hanging this charms on your tree.
Fairies' Tear Drops
Whenever a winter faerie experience a great suffering she step aside from the world to craft a unique item to remember her pain. This unusual and exquisite items are call The Faeries Tear Drops.
Jewels of the Master Wizards
For a magic user jewels are more than mere ornaments. Those could host powerful spells or increase the wielder magical skills. And if you are not a mage? Well, at least those will boost your Charisma.
Ambush of the Bad Elves
Afraid of the Bad Elves or The Grinch. Hang those from your christmas tree and you will be free of bad christmas spirits and even the grumpy Krampus will look for another place to visit.
Wizarding Apparatus
The bread and butter of every wizard equipment. They use many of those items during their lives so don't choose just one !
Baubles of the Little Ones 3D
Perfect for the smaller wizard apprentices. Boost their painting skills with those so they can help you in the future with the hordes of unpainted models you keep under your bed.
Baubles of the Little Ones 2D
Your elves are very young or you are running out of time? 2D baubles are the fastest way to decorate your tree if you don't want to use magic and prefer a more mundane method.
Charms of the Sorcerer's Abode
Christmas is more than a decorated tree. Try those to decorate your table and get the full Wizards Christmas experience.
Marvelous Munchies Makers
Crafting potions made you hungry ? Gather the family around and create the best-shaped Christmas cookies with these perfect cookie cutters! And hey, don't eat all that raw dough!! I can see you ;)
Succulent Castle of the Mage Chef
Time to play with your food!i Channel your dual class character, half cook and half architect and create the most magnificent castle that cookie dough can make with this carefully designed cookie cutter set. Your imagination - and the space you have) - are your only limits!
Orbs of the Adventurers
Love our Christmas Adventurers? Here, we've set them up inside enchantingly crafted openwork balls to hang up in your tree
Renders Vs 3D Prints
- In grey, the 3D render (on this page, most objects have been 3D-rendered in colour)
- In orange, the 3D print on a home 3D printer
- In colour, the same one we proudly painted in 10 minutes...
- And then, the actual photo in our tree!
You will need the use of a 3D Printer
To make use of the files, you will need a resin 3D printer (which we do NOT provide), such as the Phrozen Mini 4K, as well as some resin (again, NOT included here).
If you don't have that, now is the perfect time to get one! Print resolution has greatly improved for home 3D printers in the last couple of years, and prices have dropped considerably. It would make a perfect Christmas gift to yourself or a loved one, and with A Wizards' Christmas, get started right away on printing beautiful things and instantly becoming the coolest person in the neighbourhood!
Operating a 3D printer is best suited to adults.
Gorgeous print to test now!!!
Pledge at any level and get immediate access to this file (image below).
Not sure yet? Pledge only $1 with the Apprentice Pledge!
Who? When? How?
→ KNOW-HOW:
As Raging Heroes, we have been successfully creating and printing our own 3D miniatures since 2009!
We are also already well-versed in providing 3D printable files to the world. In April 2020, we launched Heroes Infinite (Raging Heroes' 3D printables) on Patreon. Check it out!!! Every month since then, we deliver to our subscribers a set 15-20 3D-printable miniatures in both supported and unsupported versions. 3000 subscribers trust us and show that you are in good hands. This month's release:The Host of the Demonicus...
→ DELIVERY PROCESS:
The files will be delivered directly into your MyMiniFactory account once the campaign ends. The files will be provided as several zipped files, broken down into categories to make it easy for you to find what you want.
→ WHEN DO YOU GET YOUR FILES?
All the objects shown on this page are done sculpted and ready for delivery as unsupported 3D files. After the end of the campaign, within hours, the files will appear in your MMF account as per your pledge level..
The supports for all the files are being done right now by our usual partners. A good part of those supported will also be showing up in your MMF account as per your pledge level within a few hours of the end of the campaign. We will continue adding them all, as quickly as they are ready. We will update this section here during the campaign to keep you informed as to the timetable.
Updates:
AWC Update #22 - Have A Very Merry Christmas!
Published on: Dec.12 @ 07h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-22-have-a-very-merry-christmas
AWC Update #21 - Crossing the Finish Line
Published on: Dec.12 @ 00h01/i>https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-21-crossing-the-finish-line
AWC Update #20 - AWC Update #20 - The Last Hour Of This Campaign!
Published on: Dec.11 @ 23h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-20-the-last-hour-of-this-campaign
AWC Update #19 - Well It Is Christmas After All!
Published on: Dec.11 @ 18h30https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-19-well-it-is-christmas-after-all
AWC Update #18 - Mysterious Mechanical Marvels
Published on: Dec.11 @ 16h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-18-mysterious-mechanical-marvels
AWC Update #17 - JUST 24 HOURS TO GO!
Published on: Dec.10 @ 21h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-17-just-24-hours-to-go
AWC Update #16 - 1 MORE UNLOCK AND 1 LAST CHALLENGE!
Published on: Dec.10 @ 19h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-15-mastering-math-for-magical-measurements
AWC Update #16 - 1 MORE UNLOCK AND 1 LAST CHALLENGE!
Published on: Dec.10 @ 19h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-16-1-more-unlock-and-1-last-challenge
AWC Update #15 - Mastering Math for Magical Measurements
Published on: Dec.10 @ 18h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-15-mastering-math-for-magical-measurements
AWC Update #14 - Magical Cooking
Published on: Dec.09 @ 21h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-14-magical-cooking
AWC Update #13 - A deliciously magical Stretch Goal
Published on: Dec.09 @ 19h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-13-a-deliciously-magical-stretch-goal
AWC Update #12 - A Note On Food And Fire Safety
Published on: Dec.09 @ 18h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-12-a-note-on-food-and-fire-safety
AWC Update #11 - It Appears You Do Want Your Tiara!... A LOT!
Published on: Dec.08 @ 19h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-11-it-appears-you-do-want-your-tiara-a-lot
AWC Update #10 - AWC Update #10 – On Table Top’s Update Article
Published on: Dec.08 @ 14h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-10-on-table-top-s-update-article
AWC Update #09 - Do You Want Your Tiara?
Published on: Dec.07 @ 19h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-09-do-you-want-your-tiara
AWC Update #08 - BURSTING THROUGH STRETCH GOALS!
Published on: Dec.07 @ 15h49https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-08-bursting-through-stretch-goals
AWC Update #07 - 17 Stretch Goals Unlocked Already!
Published on: Dec.06 @ 18h10https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-07-17-stretch-goals-unlocks-so-far
AWC Update #06 - Hellstorm Wargaming’s Magical Miniature Snow Globe
Published on: Dec.06 @ 14h40https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-06-hellstorm-wargaming-s-magical-miniature-snow-globe
AWC Update #05 - Let’s Get Together!
Published on: Dec.06 @ 00h01https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-05-let-s-get-together
AWC Update #04 - Divining New Enchanted Objects!
Published on: Dec.05 @ 23h40https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-04-casting-divination-reveals-new-enchanted-objects
AWC Update #03 - FUNDED IN ONE MINUTE!
Published on: Dec.05 @ 4h00https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-03-funded-in-one-minute
AWC Update #02 - On TableTop conjures up some decorations!
Published on: Dec.05 @ 00h23https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-02-on-table-top-conjure-up-some-decorations
AWC Update #01 - Uncover the Secrets of our Most Precious Artefacts
Published on: Dec.05 @ 3h20
https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-01-uncover-the-secrets-of-our-most-precious-artefacts
AWC Update #00 - Ready To Launch
Published on: Dec.05 @ 00h23https://www.ragingheroes.com/blogs/a-wizards-christmas-updates/awc-update-00-ready-to-launch
→ Keep up to date and meet fellow backers ←
Join the Facebook Group NOW!
It's a private group, but you'll be added very quickly!
And when you're in,
share what you think is the most magical thing about Christmas!
