Lost Adventures Vol 2: All-In-One 3D Printable Adventures
Created by TheLostAdventuresCo
Creating 3D Printable Minis, Terrain, Maps, and Accompanying RPG Content for Home 3D Printers. The Lost Adventures Vol. 2 is more than just a 3D miniature Kickstarter. It is a collection of premium 3D printable miniatures, terrain, and RPG content made specifically for this set of 3D printable models, making it easier than ever to use what you print with minimal planning required.
Lost Adventures Vol 2: All-In-One 3D Printable Adventures
Created by TheLostAdventuresCo- Pledges (1)
- Add-ons (0)
- View on Kickstarter
Pledges
2235 backers
USD 85.00
Ancient Green Guardian Dragon - Revtath the Listener
An ancient green dragon that pushes the term "miniature," Revtath is ready to burst from the trees and give your players the fright of their lives. Comes split and pre-supported for easy printing on standard resin 3D printers.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
115mm x 50mm x 130mmSUPPORTS: Pre-supported versions included (unsupported versions also included)SCULPTED BY:Davi Cao
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Ancient Green Guardian Dragon - Revtath the Listener is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Bentbough Library (Heartwood Village)
The memories, and history, of the Greensea can be found here: in the Bentbough Library. This playable building is filled with a beautiful curved staircase, a beautiful balcony, and two floors of playable space. Bentbough Library includes the following:
- Bentbough Library
- Bentbough Library Tree Base
This set is supportless and prints with no additional slicer supports needed.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY:Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Bentbough Library is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Bloodbarrow Gnolls (Set of 5)
Their bark is worse than their… no, no, their bite is pretty bad. Bring the pack together with these gnolls, ready to ambush adventurers and rampage across the countryside. The Bloodbarrow Gnolls (Set of 5) includes the following 32mm miniatures:
- Gnoll Berserker
- Gnoll Bowman
- Gnoll Shaman
- Gnoll Slingman (comes with thicker sling variant)
- Gnoll Spearman
The Bloodbarrow Gnolls (Set of 5) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Max Maurel
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Bloodbarrow Gnolls (Set of 5) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Elder Water Elemental - The Darkfathom
The water laps at the side of your party’s boat, all is calm, until a rush of water and a spray of foam swirls into the form of a HUGE water elemental! The Darkfathom, Elder Water Elemental, includes the following 89mm tall miniature:
- Elder Water Elemental (Includes split and whole versions)
The Elder Water Elemental comes pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported version is included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Elder Water Elemental - The Darkfathom is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Ettercaps & Matriarch (Set of 5)
Make your players’ skin crawl with the ettercap matriarch and her minions, sure to help you spin tales of horror and tangle your players in webs of dread. The Ettercaps & Matriarch (Set of 5) includes the following 32mm miniatures:
- Ettercap 1 (versions with/without web)
- Ettercap 2 (versions with/without web)
- Ettercap 3
- Ettercap 4
- Ettercap Matriarch (versions with/without kids)
The Ettercaps & Matriarch (Set of 5) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Ettercaps & Matriarch (Set of 5) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Everspring Temple (Heartwood Village)
Can you hear it? The clarion sound of the Everspring Temple bell? This playable temple is designed to delight, with a movable bell, intricate carvings, and blazing braziers. Everspring Temple includes the following:
- Everspring Temple
- Everspring Temple Tree Base
This set is supportless and prints with no additional slicer supports needed.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY:Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Everspring Temple is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Fairy House (Heartwood Village)
It’s not just a house your grandma will love for her ceramic fairy collection, this fairy house has ample space for NPC’s and adventurers, with removable roofs and whimsical designs to delight. The Fairy House includes the following:
- Fairy House
- Fairy House Tree Base
This set is supportless and prints with no additional slicer supports needed.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
200mm x 175mm x 120mm
SUPPORTS: Supportless (FDM)
SCULPTED BY:Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Fairy House is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Fallen Trees Scatter (Set of 5)
If a fallen tree is 3D printed, does it make a sound if no one is around to hear? Find out with this set of fallen tree scatter! The Fallen Trees Scatter (Set of 5) includes the following 3D printable models:
- Fallen Cracked Tree
- Fallen Cracked Tree Over Rock (Rock Pattern Variants)
- Fallen Log (With/Without Rock Variants)
- Giant Tree Stump (With/Without Door Variant)
- Rotting Log
This set is supportless and prints with no additional slicer supports needed.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
205mm x 65mm x 50mm
SUPPORTS: Supportless (FDM)
SCULPTED BY:Jon Robelia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Fallen Trees Scatter (Set of 5) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Female Bugbears (Set of 3)
These bugbears are ready to brawl, taking on owlbears, adventurers, and other goblins alike. Add these three female bugbears to your arsenal, and take the fight to just about anyone. The Female Bugbears (Set of 3) includes the following 32mm miniatures:
- Female Bugbear - Javelin
- Female Bugbear - Owlbear
- Female Bugbear - Sword & Shield
The Female Bugbears (Set of 3) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Female Bugbears (Set of 3) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Female Lizardfolk (Set of 3)
These lizards are out for your gizzards! Sink your claws into a new set of female lizardfolk, ready to step from the shadows into your games. The Female Lizardfolk (Set of 3) includes the following 32mm miniatures:
- Female Lizardfolk - Blowdart
- Female Lizardfolk - Bow
- Female Lizardfolk - Staff
The Female Lizardfolk (Set of 3) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Female Lizardfolk (Set of 3) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Fey Lodge (Heartwood Village)
A two-story lodge with removable second story and roof this lodge will serve as the perfect woodland resting place for your adventurers. The Fey Lodge includes the following:
- Fey Lodge
- Fey Lodge Tree Base
This set is supportless and prints with no additional slicer supports needed.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
205mm x 190mm x 95mm
SUPPORTS: Supportless (FDM)
SCULPTED BY:Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Fey Lodge is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Fey-Dhok Forest Kobolds (Set of 3)
You know what kobolds need? To be bigger and be made of wood! Add an element of the new and unusual to your games with these large-sized kobold variants, prowling through the woods in search of their next meal. The Fey-Dhok Forest Kobolds (Set of 3) includes the following 32mm-scaled miniatures:
- Fey-Dhok Forest Kobold - Horns
- Fey-Dhok Forest Kobold - Patrolling
- Fey-Dhok Forest Kobold - Pounce
The Fey-Dhok Forest Kobolds (Set of 3) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Fey-Dhok Forest Kobolds (Set of 3) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Forest Troll Reavers (Set of 3)
What if there were troll that were bigger, badder, with a weapon the size of five men? Dream no more - meet the Amberhusk trolls, ready to shake up your games with their size and ferocity.
The Forest Troll Reavers (Set of 3) includes the following 75mm-scaled miniatures:
- Charging Troll (includes following hand variants: fist, open, and hammer)
- Leader Troll (includes following hand variants: fist, open, sword facing in/out)
- Roaring Troll Claws (includes following hand variants: fist, open, claw)
The Forest Troll Reavers (Set of 3) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Ronald Bondoc
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Forest Troll Reavers (Set of 3) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Forest Troll Soulspeakers (Set of 3)
Each Amberhusk tribe is led by a Soulspeaker who is considered the most spiritually connected to The Greensea. Amberhusk trolls believe that a Soulspeaker's magical powers come from the sap and amber harvested from the Mother Tree.
The Forest Troll Soulspeakers (Set of 3) includes the following 75mm-scaled miniatures:
- Headdress Caster (includes two different torso options and the following hand variants: spell, fist, open, and staff)
- Lowered Hands Caster (includes following hand variants: spell, fist and staff)
- Walking Caster (includes two different torso options and the following hand variants: spell, fist, open and staff)
The Forest Troll Soulspeakers (Set of 3) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Ronald Bondoc
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Forest Troll Soulspeakers (Set of 3) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Heartwood Sages: Adventuring Poses (Set of 4)
Need some exotic clerics to do more than just heal for a change? These sages are ready to bury enemies in a barrage of spells and add a unique flavor to your table. The Heartwood Sages: Adventuring Poses (Set of 4) includes the following 32mm miniatures:
- Birdfolk Necro - Adventuring Pose
- Turtlefolk Death Cleric - Adventuring Pose
- Elephantfolk Priestess Isma - Adventuring Pose
- Turtlefolk Druid Female - Adventuring Pose
The Heartwood Sages: Adventuring Poses (Set of 4) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Christine Van Patten (Moonlight Minis)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Heartwood Sages: Adventuring Poses (Set of 4) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Heartwood Sages: Storytelling Poses (Set of 4)
Mysterious sages, and the wisest of the village populace - perfect for your wild towns and locations. The Heartwood Sages: Storytelling Poses (Set of 4) includes the following 32mm miniatures:
- Birdfolk Necro - Story Pose
- Turtlefolk Death Cleric - Story Pose
- Elephantfolk Priestess Isma - Story Pose
- Turtlefolk Druid Female - Story Pose
The Heartwood Sages: Storytelling Poses (Set of 4) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Christine Van Patten (Moonlight Minis)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Heartwood Sages: Storytelling Poses (Set of 4) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Heartwood Tradefolk: Adventuring Poses (Set of 4)
When the Heartwood Village is in trouble, it isn't just the Wardens that step up to defend the town! The Heartwood Tradefolk: Adventuring Poses (Set of 4) includes the following 32mm miniatures:
- Birdfolk Fisher Bubbles - Adventuring Pose
- Catfolk Fisherman - Adventuring Pose
- Giantfolk Artisan Olodan - Adventuring Pose
- Dragonborn Innkeep - Adventuring Pose
The Heartwood Tradefolk: Adventuring Poses (Set of 4) comes pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Biernier & Matt Gubser
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Heartwood Tradefolk: Adventuring Poses (Set of 4) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Heartwood Tradefolk: Storytelling Poses (Set of 4)
Every town needs a few trade folk, NPC’s, and artisans to talk to. Add variety to your game with these four new minis, ready to populate any town or hamlet. The Heartwood Tradefolk: Storytelling Poses (Set of 4) includes the following 32mm miniatures:
- Birdfolk Fisher Bubbles - Story Pose
- Catfolk Fisherman - Story Pose
- Giantfolk Artisan Olodan - Story Pose
- Dragonborn Innkeep - Story Pose (Tail/No Tail Versions)
The Heartwood Tradefolk: Storytelling Poses (Set of 4) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Biernier and Matt Gubser
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Heartwood Tradefolk: Storytelling Poses (Set of 4) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Heartwood Treant
They say some heartwood trees can speak, and move, and lay dormant in the forests of the Greensea...could it be? This Heartwood Treant is ready to lumber into your game today! Comes in split and whole variants.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
120mm x 68mm x 130 mmSUPPORTS: Pre-supported versions included (unsupported versions also included)SCULPTED BY:Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Heartwood Treant is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Heartwood Village: Interior Furniture Fancy Set (Set of 16)
Heartwood Village has some of the finest tradesfolk in the entire world and their interior design reflects the varied design aspects of their home. This is a fancy set with a bit more character. Heartwood Village: Interior Furniture Fancy Set (Set of 16) includes the following:
- 4 Different Chairs
- 3 Different Chests
- 2 Small Tables
- 2 Different Shelving Units
- 2 Different Beds
- 1 Long Table
- 1 Wooden Table
- 1 Set of Drawers
This set is supportless and prints with no additional slicer supports needed.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any size
SUPPORTS: Supportless (FDM)
SCULPTED BY:Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Heartwood Village: Interior Furniture Fancy Set (Set of 16) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Heartwood Village: Interior Furniture Simple Set (Set of 12)
Heartwood Village has some of the finest tradesfolk in the entire world and their interior design reflects the varied design aspects of their home. This is a simple set. Heartwood Village: Interior Furniture Simple Set (Set of 12) includes the following:
- 2 Different Chairs
- 2 Different Shelving Units
- 2 Different Beds
- 2 Different Chests
- 2 Different Small Tables
- 1 Thatched Table
- 1 Wooden Table
This set is supportless and prints with no additional slicer supports needed.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any size
SUPPORTS: Supportless (FDM)
SCULPTED BY:Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Heartwood Village: Interior Furniture Simple Set (Set of 12) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Heartwood Wardens: Adventuring Poses (Set of 4)
The wardens of Heartwood Village are a force to be reckoned with when lives are on the line! The Heartwood Wardens: Adventuring Poses (Set of 4) includes the following 32mm miniatures:
- Catfolk Ranger - Adventuring Pose
- Elephantfolk Guard Bonrum - Adventuring Pose
- Catfolk Fighter Jira - Adventuring Pose
- Minotaur Beastlord - Adventuring Pose
The Heartwood Wardens: Adventuring Poses (Set of 4) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Christine Van Patten (Moonlight Minis) & Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Heartwood Wardens: Adventuring Poses (Set of 4) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Heartwood Wardens: Storytelling Poses (Set of 4)
Add a touch of mystery to your games with these wardens, fighters, and guards - guaranteed to bring a sense of protection to your settlements. The Heartwood Wardens: Storytelling Poses (Set of 4) includes the following 32mm miniatures:
- Catfolk Ranger - Story Pose
- Elephantfolk Guard Bonrum - Story Pose
- Catfolk Fighter Jira - Story Pose
- Minotaur Beastlord - Story Pose
The Heartwood Wardens: Storytelling Poses (Set of 4) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Christine Van Patten (Moonlight Minis) & Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Heartwood Wardens: Storytelling Poses (Set of 4) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Into The Greensea Lore & Monster Supplement [PDF]
Explore the Greensea region in this lore supplement, filled with information to help you use all of the models from the Lost Adventures Vol. 2 Collection. This 33-page supplement includes the following:
- Greensea lore including regional information
- 19 Encounter Hooks
- 16 5E-Compatible Monster Stat Blocks
- 14 Easy-to-use NPC Blocks
IMPORTANT: This is the digital PDF version of this supplement. No physical product/version of this book is included in this item listing.
Compatible with the 5th Edition of one of the worlds most famous RPGs.
FORMAT:PDFWRITTEN BY:Dillon Olney, Nick PorterfieldART BY:Kenji Gonzales
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Into The Greensea - Lore & Monster Supplement is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Jungle & Temple Bases (Set of 10)
New and dynamic woodland and temple bases to help support and display your amazing prints and paints, these 10 bases range from 25mm to 100m for medium to gargantuan miniatures. The Jungle & Temple Bases (Set of 10) includes the following bases:
- 1 inch Forest 1
- 1 inch Forest 2
- 2 inch Forest 1
- 2 inch Forest 2
- 3 inch Forest 1
- 3 inch Forest 2
- 4 inch Forest 1
- 5 inch Forest 2
- 1 inch Temple Tile
- 2 inch Temple Tile
The Jungle & Temple Bases (Set of 10) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Cobramode
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Jungle & Temple Bases (Set of 10) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Jungle Giant Juggernaut
Jungle Giant Juggernauts are the gardeners of the Green sea - even if they're a bit messy in their horticultural methods. Ready to bring a tree to your table and game today! Comes in split and whole variants.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
120mm x 68mm x 130 mmSUPPORTS: Pre-supported versions included (unsupported versions also included)SCULPTED BY:Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Jungle Giant Juggernaut is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Jungle Giantess Rootseer
Jungle Giantess Rootseers protect and act as caretakers for tropical regions. Calm and introspective by nature, they typically prefer to avoiding attacking. Comes in split and whole variants.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
120mm x 68mm x 130 mmSUPPORTS: Pre-supported versions included (unsupported versions also included)SCULPTED BY:Davi Cao
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Jungle Giantess Rootseer is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Jungle Trees (Set of 3)
A leaning tree, a viney tree, and a thick tree - easy to print, easy to assemble, and easy to impress your players with! The Jungle Trees (Set of 3) includes the following 3D printable models:
- Jungle Tree 1 - Inclined Tree
- Jungle Tree 2 - Multiple Trunk Tree
- Jungle Tree 3 - Thick Tree
This set is supportless and prints with no additional slicer supports needed.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
205mm x 65mm x 50mm
SUPPORTS: Supportless (FDM)
SCULPTED BY:Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Jungle Trees (Set of 3) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Quipper Swarm & Dire Quipper (Set of 2)
Give the monsters a swimming chance with these quippers to swarm over your players or truly challenge them with a human-sized dire quipper ready to take a bite out of any adventurer. The Quipper Swarm & Dire Quipper (Set of 2) includes the following 32mm-scaled miniatures:
- Dire Quipper
- Quipper Swarm
The Dire Quippers come pre-supported for resin printing. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME: Any size
SUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Joshua Black
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: Quipper Swarm & Dire Quipper (Set of 2) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
River Kraken
Some sea creatures are meant to be...released - and this River Kraken is no exception! Have your players face off against the most powerful predator of Heartwood's river system! Or make it a fearsome ocean-dwelling beast instead. Comes split for 3D printing on resin and FDM printers.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
120mm x 68mm x 130 mmSUPPORTS: Pre-supported versions included (unsupported versions also included)SCULPTED BY:James Dorrington
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The River Kraken is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Sap 'n Suds Inn (Heartwood Village)
Need an exotic place to rest your weary legs? A fey meeting place? An elven winery? The Sap 'n Suds Inn serves as a wonderful inn to start your stories, or perhaps play through a night to remember (or forget)! The unique villagers of Heartwood frequent this inn which has a fully playable interior and is sure to delight and enthrall players who see it. The Sap 'n Suds Inn includes the following:
- Sap 'n Suds Inn
- Sap 'n Suds Inn Tree Base
This set is supportless and prints with no additional slicer supports needed.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
220mm x 220mm x 250mm
SUPPORTS: Supportless (FDM)
SCULPTED BY:Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Sap 'n Suds Inn is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Shambling Mound & Vine Blights (Set of 3)
It’s coming right for us! When the party finds themselves deep within a woodland realm, these vine blights and shambling mound are the perfect fit for your next encounter. The Shambling Mound & Vine Blights (Set of 3) includes the following 32mm-scaled miniatures:
- Shambling Mound
- Male Vine Blight (includes flat/regular cut variants)
- Female Vine Blight
The Shambling Mound & Vine Blights (Set of 3) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Christine Van Patten (Moonlight Minis)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Shambling Mound & Vine Blights (Set of 3) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Ti-Khal (Set of 5)
Slithering from the depths of a long-forgotten city, the Ti-Khal are ready to drag your players into dark and ancient depths. Challenge your players and create new and interesting storylines with these five large-sized models. The Ti-Khal (Set of 5) includes the following 32mm miniatures:
- Ti-Khal Bow
- Ti-Khal Crossbow
- Ti-Khal Dual Wield (Swords)
- Ti-Khal Greatclub
- Ti-Khal Polearm
The Ti-Khal (Set of 5) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Ti-Khal (Set of 5) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Ti-Khal Queen
She protects, she attacks, and she definitely stabs - the Ti-Khal Queen is the fearless leader of The Scaled Ones. Comes in split and whole variants.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
120mm x 68mm x 130 mmSUPPORTS: Pre-supported versions included (unsupported versions also included)SCULPTED BY:Davi Cao
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Ti-Khal Queen is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Tiefling Sorceror (Set of 2)
Brooding, mysterious, and powerful, few can resist the allure of a tiefling spellcaster. Create a new epic character or want to populate your games with a mysterious figure using this enigmatic tiefling. The Tiefling Sorceror (Set of 2) includes the following 32mm-scaled miniature:
- Tiefling Sorceror - Adventuring Pose
- Tiefling Sorceror - Storytelling Pose
The Tiefling Sorceror (Set of 2) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Tiefling Sorceror (Set of 2) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Undead Ti-Khal (Set of 6)
What is more terrifying than a sentient snake monster? An UNDEAD sentient snake monster. These horrifying abominations are ready to slither out of the dark and onto your table. The Undead Ti-Khal (Set of 6) includes the following large-sized 32mm miniatures:
- Undead Ti-Khal Bladefist
- Undead Ti-Khal Bow
- Undead Ti-Khal Dualblade
- Undead Ti-Khal Polearm
- Undead Ti-Khal Spellcaster
- Undead Ti-Khal Sword
The Undead Ti-Khal (Set of 6) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Undead Ti-Khal (Set of 6) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Warden Watchtower (Heartwood Village)
YOU SHALL NOT PASS!... into the woodland realms without being noticed. This watchtower with modular second story and roof serves as a great watchpoint for woodland elves, fey creatures, and more! Cute little bell also included. The Warden Watchtower includes the following:
- Warden Watchtower
- Warden Watchtower Tree Base
This set is supportless and prints with no additional slicer supports needed.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
200mm x 200mm x 230mm
SUPPORTS: Supportless (FDM)
SCULPTED BY:Sebastiano Di Grazia
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Warden Watchtower is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Will-o-wisps (Set of 2)
Lure your players into another game with these two will-o-wisps. Glowing faintly in the night air, they are sure to attract the attention of a wandering party. These files can also serve as spell effects. The Will-o-wisps (Set of 2) includes the following 32mm miniatures:
- Willowisp - 1
- Willowisp - 2
The Will-o-wisps (Set of 2) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Andrew Biernier
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Will-o-wisps (Set of 2) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Wood Elves Garrison Regiment (Set of 5)
Regal, swift, and deadly, these wood elves are ready to leap from the nearest tree right onto your table. Perfect as assassins, rangers, or sacred defenders of a woodland realm. The Wood Elves Garrison Regiment (Set of 5) includes the following 32mm miniatures:
- Wood Elf Commander
- Wood Elf Garrison - Female Bow
- Wood Elf Garrison - Male Bow
- Wood Elf Garrison - Male Dagger
- Wood Elf Garrison - Female Dagger
The Wood Elves Garrison Regiment (Set of 5) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Brandon Leach
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Wood Elves Garrison Regiment (Set of 5) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Wood Elves Scout Regiment (Set of 4)
Venturing ahead to explore new and dangerous locations, swinging down from tree branches to deliver a devastating blow, this wood elf scout regiment is ready to sneak into your games. The Wood Elves Scout Regiment (Set of 4) includes the following 32mm miniatures:
- Wood Elf Scout - Female Bow
- Wood Elf Scout - Male Bow
- Wood Elf Scout - Female Dagger
- Wood Elf Scout - Male Dagger
The Wood Elves Scout Regiment (Set of 4) come pre-supported for resin printing by Greg Kourakos, 3D Printing Pro. Unsupported versions are included as well.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Pre-supported versions included (unsupported versions also included)
SCULPTED BY: Brandon Leach
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Wood Elves Scout Regiment (Set of 4) is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Cliff Beach Map Pack (Greensea Region)
A cliff lining the beach. The Cliff Beach Map Pack includes the following digital downloads:
Abandoned Inn and Tower - Letter - 8.5x11 (GRID/NONGRID)
Abandoned Inn and Tower - A4 (GRID/NONGRID)
Abandoned Inn and Tower - (GRID/NONGRID)
Abandoned Inn and Tower - DTT - (GRID/NONGRID)
This map was made to be used with Into The Greensea Lore and Monster Supplement from The Lost Adventures Vol. 2, but are system-neutral, and can be used in any fantasy game, or digital tabletops such as Roll20, Fantasy Grounds, Foundry VTT, Astral, and more.
FORMAT: PDF (for both digital tabletop and home printing)
PRINTER PAPER SIZES: A4, 8.5in. x 11in., Digital Tabletop
MAP ART BY: Lez Johnson (Zatnikotel)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Cliff Beach Map Pack is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Giant Roots Map Pack (Greensea Region)
Huge roots branch out from an even larger tree in this map pack. The Giant Roots Map Pack includes the following digital downloads:
Roots (GRID/NONGRID) - Letter (8.5 x 11in)
Roots (GRID/NONGRID) - A4
Roots (GRID/NONGRID)
Roots (GRID/NONGRID) - DTT
This map was made to be used with Into The Greensea Lore and Monster Supplement from The Lost Adventures Vol. 2, but are system-neutral, and can be used in any fantasy game, or digital tabletops such as Roll20, Fantasy Grounds, Foundry VTT, Astral, and more.
FORMAT: PDF (for both digital tabletop and home printing)
PRINTER PAPER SIZES: A4, 8.5in. x 11in., Digital Tabletop
MAP ART BY: Lez Johnson (Zatnikotel)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Giant Roots Map Pack is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Heartwood Village NPC Cards [PDF]
Tired of coming up with NPC’s on the fly? Pick up these 10 NPC cards including a wide array of new characters to drop into your games, each with motivations, fears, roleplaying prompts, descriptions, full-color art, and more! Includes the following:
10 Character NPC Cards (compatible with Lost Adventures Vol. 2 Heartwood Villagers)
IMPORTANT: This is the digital PDF version of this supplement. No physical product/version of this is included in this item listing.
Compatible with the 5th Edition of one of the worlds most popular RPG.
FORMAT: PDF & JPG
WRITTEN BY: Dillon Olney, Nick Porterfield
ART BY: Axel Livoireau & Kenji Gonzales
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Heartwood Village NPC Cards are a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Jungle Dungeon ("Jungeons") Map Pack (Greensea Region)
Give your players a dungeon-like experience with these specially made "jungeon" map tiles. Perfect to mix and match and add variety to any jungle crawl. The Jungle Dungeon ("Jungeons") Map Pack includes the following digital downloads:
Jungeon Henge Fey Night (GRID/NONGRID)
Jungeon Henge (GRID/NONGRID)
Jungeon Pools (GRID/NONGRID)
Jungeon Pools Night Glow (GRID/NONGRID)
Jungeon Simple 1 (GRID/NONGRID)
Jungeon Simple 2 (GRID/NONGRID)
Jungeon Simple 3 (GRID/NONGRID)
Jungeon Simple 4 (GRID/NONGRID)
Jungeon Webs (GRID/NONGRID)
Jungeon Willow Night (GRID/NONGRID)
All of the above variants come in the following sizes: Letter, A4, Original, DTT
This map was made to be used with Into The Greensea Lore and Monster Supplement from The Lost Adventures Vol. 2, but are system-neutral, and can be used in any fantasy game, or digital tabletops such as Roll20, Fantasy Grounds, Foundry VTT, Astral, and more.
FORMAT: PDF (for both digital tabletop and home printing)
PRINTER PAPER SIZES: A4, 8.5in. x 11in., Digital Tabletop
MAP ART BY: Lez Johnson (Zatnikotel)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Jungle Dungeon ("Jungeons") Map Pack is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Jungle Heights Map Pack (Greensea Region)
Jungle Heights: The parts of the jungle high enough to be clouded, where falling is as dangerous as the creatures within. Perfect to add more variety to your forest/jungle adventures. The Jungle Heights Map Pack includes the following digital downloads:
Heights Bridge Fog (GRID/NONGRID)
Heights Bridge No Fog (GRID/NONGRID)
Heights Just Trees Fog (GRID/NONGRID)
Heights Just Trees No Fog (GRID/NONGRID)
Heights Ledge Fog (GRID/NONGRID)
Heights Ledge No Fog (GRID/NONGRID)
Heights Linked Fog (GRID/NONGRID)
Heights Linked No Fog (GRID/NONGRID)
Heights Pillars Fog (GRID/NONGRID)
Heights Pillars No Fog (GRID/NONGRID)
All of the above variants come in the following sizes: Letter, A4, Original, DTT
This map was made to be used with Into The Greensea Lore and Monster Supplement from The Lost Adventures Vol. 2, but are system-neutral, and can be used in any fantasy game, or digital tabletops such as Roll20, Fantasy Grounds, Foundry VTT, Astral, and more.
FORMAT: PDF (for both digital tabletop and home printing)
PRINTER PAPER SIZES: A4, 8.5in. x 11in., Digital Tabletop
MAP ART BY: Lez Johnson (Zatnikotel)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Jungle Heights Map Pack is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Jungle Map Pack (Greensea Region)
The bread and butter map pack for jungled and deep forest adventures. A perfect start for your forest/jungle adventures. The Jungle Map Pack includes the following digital downloads:
Jungle Clearing Closed Edge (GRID/NONGRID)
Jungle Clearing Open Edge (GRID/NONGRID)
Jungle Dense Closed Edge (GRID/NONGRID)
Jungle Dense Open Edge (GRID/NONGRID)
Jungle Light Closed Edge (GRID/NONGRID)
Jungle Light Open Edge (GRID/NONGRID)
Jungle Light Path Open Edge (GRID/NONGRID)
Jungle Light Road Open Edge (GRID/NONGRID)
Jungle Light Stream Open Edge (GRID/NONGRID)
Jungle Moderate Closed Edge (GRID/NONGRID)
Jungle Moderate Open Edge (GRID/NONGRID)
All of the above variants come in the following sizes: Letter, A4, Original, DTT
This map was made to be used with Into The Greensea Lore and Monster Supplement from The Lost Adventures Vol. 2, but are system-neutral, and can be used in any fantasy game, or digital tabletops such as Roll20, Fantasy Grounds, Foundry VTT, Astral, and more.
FORMAT: PDF (for both digital tabletop and home printing)
PRINTER PAPER SIZES: A4, 8.5in. x 11in., Digital Tabletop
MAP ART BY: Lez Johnson (Zatnikotel)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Jungle Map Pack is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Jungle River Map Pack (Greensea Region)
Jungle maps with rivers running through them for. Perfectly paired with other jungle maps. The Jungle River Map Pack includes the following digital downloads:
River Calm Bend (GRID/NONGRID)
River Calm Direct (GRID/NONGRID)
River Island (GRID/NONGRID)
River Kraken (GRID/NONGRID)
River Rapids Bend (GRID/NONGRID)
River Rapids Direct (GRID/NONGRID)
All of the above variants come in the following sizes: Letter, A4, Original, DTT
This map was made to be used with Into The Greensea Lore and Monster Supplement from The Lost Adventures Vol. 2, but are system-neutral, and can be used in any fantasy game, or digital tabletops such as Roll20, Fantasy Grounds, Foundry VTT, Astral, and more.
FORMAT: PDF (for both digital tabletop and home printing)
PRINTER PAPER SIZES: A4, 8.5in. x 11in., Digital Tabletop
MAP ART BY: Lez Johnson (Zatnikotel)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Jungle River Map Pack is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Sulphur Springs Map Pack (Greensea Region)
A pair of sulphur springs - perfect for a relaxing detour (or maybe an unexpected ambush). The Sulphur Springs Map Pack includes the following digital downloads:
Sulphur Springs 1 (GRID/NONGRID)
Sulphur Springs 2 (GRID/NONGRID)
Sulphur Springs 3 (GRID/NONGRID)
All of the above variants come in the following sizes: Letter, A4, Original, DTT
This map was made to be used with Into The Greensea Lore and Monster Supplement from The Lost Adventures Vol. 2, but are system-neutral, and can be used in any fantasy game, or digital tabletops such as Roll20, Fantasy Grounds, Foundry VTT, Astral, and more.
FORMAT: PDF (for both digital tabletop and home printing)
PRINTER PAPER SIZES: A4, 8.5in. x 11in., Digital Tabletop
MAP ART BY: Lez Johnson (Zatnikotel)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Sulphur Springs Map Pack is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Swamp Map Pack (Greensea Region)
A pair of sulphur springs - perfect for a relaxing detour (or maybe an unexpected ambush). The Sulphur Springs Map Pack includes the following digital downloads:
Sulphur Springs 1 (GRID/NONGRID)
Sulphur Springs 2 (GRID/NONGRID)
Sulphur Springs 3 (GRID/NONGRID)
All of the above variants come in the following sizes: Letter, A4, Original, DTT
This map was made to be used with Into The Greensea Lore and Monster Supplement from The Lost Adventures Vol. 2, but are system-neutral, and can be used in any fantasy game, or digital tabletops such as Roll20, Fantasy Grounds, Foundry VTT, Astral, and more.
FORMAT: PDF (for both digital tabletop and home printing)
PRINTER PAPER SIZES: A4, 8.5in. x 11in., Digital Tabletop
MAP ART BY: Lez Johnson (Zatnikotel)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Sulphur Springs Map Pack is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
Waterfall Map Pack (Greensea Region)
Splash some fun into your mountain encounters with this waterfall map pack. The Waterfall Map Pack includes the following digital downloads:
Waterfall Corner (GRID/NONGRID)
Waterfall Large (GRID/NONGRID)
Waterfall Triple (GRID/NONGRID)
All of the above variants come in the following sizes: Letter, A4, Original, DTT
This map was made to be used with Into The Greensea Lore and Monster Supplement from The Lost Adventures Vol. 2, but are system-neutral, and can be used in any fantasy game, or digital tabletops such as Roll20, Fantasy Grounds, Foundry VTT, Astral, and more.
FORMAT: PDF (for both digital tabletop and home printing)
PRINTER PAPER SIZES: A4, 8.5in. x 11in., Digital Tabletop
MAP ART BY: Lez Johnson (Zatnikotel)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Waterfall Map Pack is a part of the Lost Adventures Vol. 2 Collection, which was made thanks to 1,889 backers.
This is a Lost Adventures Vol. 2 Late Pledge: All-In. You will receive everything that has been made for the campaign, including any stretch goals. Note: Kickstarter Exclusives are NOT included.