Pit Fighter
Created by 
gregkourakos
Playthings of the Gods, only the greatest of warriors survive the hallowed fighting pits stained by the blood of champions. A fully 3-d printable game! All miniatures professionally pre-supported by 3dprintingpro for the best printing experience possible! All terrain can be printed on "small" resin printers! Less than $1 per extremely high quality miniature! 3 Full sets of bases, one set to match each arena!
Pit Fighter
Created by gregkourakos
- Pledges (2)
- Add-ons (0)
- View on Kickstarter
Pledges
1369 backers
USD 40.00
Baastherox
Free Gift to all backers - NOT FOR MERCHANT RESALE
Leicheim Watch Tower and Prison Cart
Free Gift to all backers! Not for reasale by Merchants. Enjoy!
Click Clack Dice Guardian Pegasus
free gift for backers! NOT FOR RESALE BY MERCHANTS! enjoy! :)
Wood Elf Blade Dancer - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Comes with dual blades and also daggers!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Pit Fighter Update 2
1. Troll - right hand integrity issue fixed, for some it printed fine for some there was a small hole
2. Shield Tankard - supports fixed
3. Civilized Ogre, support fix on his weapon/hand
3. Skull shield pit decor is now supported
4. Helmet shield pit decor is now supported
2 Goblin Archers from Anime Dungeons
Free gift to our Pit Fighter backers!
Amazon Princess - Professionally pre-supported!
Amazon Princess sculpted for Bloody Sword Miniatures by RN EStudios and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can eassily be scaled larger or smaller.
Avatar of the Gods - Professionally pre-supported!
Avatar of the Gods sculpted for Bloody Sword Miniatures by RN EStudios and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Northern Barbarian Queen - Professionally pre-supported! Multiple Weapon Options
Babrbarian Queen sculpted for Bloody Sword Miniatures by RN EStudios and professionally pre-supported for you by 3dprintingpro! Multiple Weapon Options! The figure comes in 34mm scale but can easily be scaled larger or smaller.
Human Bard - Professionally pre-supported!
sculpted for Bloody Sword Miniatures by Miniatures of Madness and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Armored Warbear - Professionally pre-supported!
sculpted for Bloody Sword Miniatures by Miniatures of Madness and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Black Orc Fighter - - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro! Multiple Weapon Options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Bugbear Chieftain - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Daniel Kelly and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! 5 different wesapons!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Centaur Chieftain - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by RG Sculpts and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Ogre - Professionally pre-supported!
The High price is becasue this is not really for sale, just free for my KS backers :)
Sculpted for Bloody Sword Miniatures by Heresy Labs and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale (so he stands 60mm tall) but can easily be scaled larger or smaller.
Dark Elf Ranger - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! Comes with Crossbows as well!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Djinn - Genie - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Titan Forge in collaboration with Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Comes with Pillar of Flame spell effect free!
The figure comes in 34mm scale (so is 60mm tall) but can easily be scaled larger or smaller.
Dragonborn Paladin - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
You get 2 vbersions, with and without tail! Comes with Greatsword weapon option as well!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Dwarf Cleric - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! Hammer and Ankh options included!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Dwarf Fighter Dual Wield - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! COmes with Axes and Swords as well!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Dwarf Slayer - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro! You get 2 figures of rht eprice of one as oyu get a no beard version as well!
Multiple Weapon Options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Elf Mage - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Comes with optional spell effects!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Female Elf Warlock -Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by RN Estudios and professionally pre-supported for you by 3dprintingpro!
3 Figures for the price of one as both minions are included!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Firbolg Druid - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Arch Villain Games and professionally pre-supported for you by 3dprintingpro!
You get a call bonus lightning spell effect!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Ghoul King - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Battle-Yak Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Gnish Gnosh - Professionally pre-supported
Sculpted for Bloody Sword Miniatures by Artisan Guild and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Gnome Artificer in Mech Suit - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! Special bonus, comes with an Alternate Version compatible with Skies of Sordane! GUn Variant not supported yet, coming soon though!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Goblin Warlock - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Orc King and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Goliath Barbarian 2-Handed Weapon - - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Human Gunslinger or Crossbow expert! - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Artisan Guild and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller. Now with an extra separate body for use with crossbows!
Multiple Weapon Options! Crossbows and Guns included!
Halfling Rogue - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Epic Adventure Miniatures and professionally pre-supported for you by 3dprintingpro!
Comes with optional treasure chest with a broken lock for basing!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Hikkiyori Swordmaster -Toad Samurai - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by CobraMode Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Human Fighter Knight - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by RN Estudios and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Lizardman Champion - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Josh Hardie and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Lizardman Chieftain - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Codex Universalis and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Minotaur Champion - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Tytan Troll Miniatures and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Ogre Champion - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Orc Berserker- Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! Axe, Sword, and Hammer
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Samurai - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Twin Goddess Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Next to Last Update!
This is almost it! All the phsyical files from the KS are now done!
Spartan Fighter - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Clay Cyanide Miniatures and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! Comes with Sword and Spear!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Predator Spider - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Print Your Monsters and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Tabaxi Samurai Fighter - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Kyoushuneko Miniatures and professionally pre-supported for you by 3dprintingpro!
Comes with spear and sword options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
The Finisher! Human Fighter - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Kraken Studios and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Thri-Keen Champion
Sculpted for Bloody Sword Miniatures by GloomyKid Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Tortle Monk - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Arcane Minis and professionally pre-supported for you by 3dprintingpro!
Comes with 3 part staff, Bo staff and hook swords!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Troll Champion - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Atlantis Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller. He stands 54mm tall, would be 60mm standing straight up.
Vampire Lord - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Artisan Guild and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Skeleton Pirate Captain- Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by RN Estudios and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Warforged Fighter - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Arcane Minis and professionally pre-supported for you by 3dprintingpro!
Comes with insane 6 weapon options!!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Werebear - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Epics N Stuff Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Wu-Kong - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Twin Goddess Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Snake Man Fighter - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Lost Adventures Company and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Pit Fighter arena bases
These bases have a beveled bottom they are made to print flat to the plat on resin printers!
Dungeon bases, Snow and Ice bases, and grass and stone bases
Cast N Play Free Gift House
Free Gift from Cast N Play to you wonderful backers! Not really meant for other people to buy that's why the price is so high :P
City of Tarok Modular Guard Tower and Dice Tower
Free gift to my KS backers, not meant for sale, thus the price!
Gnome Artificer in Mech Suit - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Comes with multiple weapons AND a Skies of Sordane gun variant model!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Harpy Queen - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Crippled God Foundry and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Stables from Kingdom of Tiradom
Free gift for my backers from the Kingdom of Tiradom Kickstarter
Not meant for re-sale thus the high price :)
Halfling House
Free Gift from Dark Realms studios for my backers, not meant for sale thus the high price :)
Pit Fighter Game Pieces - Battle Planner and Tokens
Battle Planner and Condition Tokens and Dice
Pit Fighter Arenas - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by The Dragon's Rest and professionally pre-supported for you by 3dprintingpro!
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Xorn - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Paul Taylor and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Leichheim Back Alley Arena for Pit Fighter
Special free gift, NOT FOR MERCHANT SALES. Enjoy yet anohter cool arena courtesy of the Leichheim KS!
Gunslinger Pose 2 - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Artisan Guild and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well, plus a crossbow option!!
Update 3
Corrected cards, corrected rules, an awesome Gunslinger variant pose and a breahtaking Samurai girl alt pose
Samurai Girl- Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Twin Goddess Miinatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Skies of Sordane Airship
Not for Merchant Sale!
Pit Fighter Name Tags by Warg'Name
These attach easily to 30 and 40mm bases. These are NOT customizable! One name tag for every Champion in the game!
Sculpted for Bloody Sword Miniatures by Warg'Name
3 Exclusive Hexton Hill Arena Tiles
Sculpted for Bloody Sword Miniatures by Graven Guild (Hexton Hills) and exclusive to the Pit Fighter Kickstarter
Rat Vendor
PLEASE NOTE, This is not for sale by the Merchants!
Props for The Finisher
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Sculpted for Bloody Sword Miniatures by Kraken Studios and professionally pre-supported for you by 3dprintingpro!
PIT FIGHTER UPDATE 1
The first major update with:
1. Harpy unsupported body added;
2. Civilized Ogre supports on horn fix;
3. Bugbear unsupported weapons added;
4. Tortle Monk hook swords properly sized;
5. Samurai Girl added supports around sword tip;
6. Tentacle B with supports for the Ice Arena;
7. Elf Warlock Minion 1 Chitubox files correctly loaded;
8. Centaur left hand shield supported Chitubox model loaded;
AND IN THEIR OWN NEW FILES
9. Rat Vendor added! yes! (remove supports from those rats with great care or you'll be gluing rats back on like I was!);
10. Fans and Stands Add-on, supported for resin - but the stands need a larger printer (Saturn, E10, Sonic Mighty, Anycubic Mono X), and another heads up these are supported with Lychee which is a free download;
11. Finisher's Props loaded; and
12. Firbolg loaded in.
This gets you everything from the Core - plus all Bonus Figures and Gifts, Bases and Tiles that get unlocked. This doesn't include add-ons, so remember to add any add-ons that you want to your total when you pledge!
78 backers
USD 140.00
Click Clack Dice Guardian Pegasus
free gift for backers! NOT FOR RESALE BY MERCHANTS! enjoy! :)
Leicheim Watch Tower and Prison Cart
Free Gift to all backers! Not for reasale by Merchants. Enjoy!
Baastherox
Free Gift to all backers - NOT FOR MERCHANT RESALE
Wood Elf Blade Dancer - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Comes with dual blades and also daggers!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Pit Fighter Update 2
1. Troll - right hand integrity issue fixed, for some it printed fine for some there was a small hole
2. Shield Tankard - supports fixed
3. Civilized Ogre, support fix on his weapon/hand
3. Skull shield pit decor is now supported
4. Helmet shield pit decor is now supported
Next to Last Update!
This is almost it! All the phsyical files from the KS are now done!
Leichheim Back Alley Arena for Pit Fighter
Special free gift, NOT FOR MERCHANT SALES. Enjoy yet anohter cool arena courtesy of the Leichheim KS!
Amazon Princess - Professionally pre-supported!
Amazon Princess sculpted for Bloody Sword Miniatures by RN EStudios and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can eassily be scaled larger or smaller.
Avatar of the Gods - Professionally pre-supported!
Avatar of the Gods sculpted for Bloody Sword Miniatures by RN EStudios and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Northern Barbarian Queen - Professionally pre-supported! Multiple Weapon Options
Babrbarian Queen sculpted for Bloody Sword Miniatures by RN EStudios and professionally pre-supported for you by 3dprintingpro! Multiple Weapon Options! The figure comes in 34mm scale but can easily be scaled larger or smaller.
Armored Warbear - Professionally pre-supported!
sculpted for Bloody Sword Miniatures by Miniatures of Madness and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Black Orc Fighter - - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro! Multiple Weapon Options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Bugbear Chieftain - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Daniel Kelly and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! 5 different wesapons!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Centaur Chieftain - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by RG Sculpts and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Ogre - Professionally pre-supported!
The High price is becasue this is not really for sale, just free for my KS backers :)
Sculpted for Bloody Sword Miniatures by Heresy Labs and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale (so he stands 60mm tall) but can easily be scaled larger or smaller.
Dark Elf Ranger - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! Comes with Crossbows as well!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Djinn - Genie - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Titan Forge in collaboration with Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Comes with Pillar of Flame spell effect free!
The figure comes in 34mm scale (so is 60mm tall) but can easily be scaled larger or smaller.
Dragonborn Paladin - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
You get 2 vbersions, with and without tail! Comes with Greatsword weapon option as well!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Dwarf Cleric - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! Hammer and Ankh options included!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Dwarf Fighter Dual Wield - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! COmes with Axes and Swords as well!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Dwarf Slayer - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro! You get 2 figures of rht eprice of one as oyu get a no beard version as well!
Multiple Weapon Options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Elf Mage - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Comes with optional spell effects!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Female Elf Warlock -Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by RN Estudios and professionally pre-supported for you by 3dprintingpro!
3 Figures for the price of one as both minions are included!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Firbolg Druid - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Arch Villain Games and professionally pre-supported for you by 3dprintingpro!
You get a call bonus lightning spell effect!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Samurai Girl- Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Twin Goddess Miinatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Ghoul King - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Battle-Yak Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Gunslinger Pose 2 - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Artisan Guild and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well, plus a crossbow option!!
Gnome Artificer in Mech Suit - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! Special bonus, comes with an Alternate Version compatible with Skies of Sordane! GUn Variant not supported yet, coming soon though!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Skies of Sordane Airship
Not for Merchant Sale!
Update 3
Corrected cards, corrected rules, an awesome Gunslinger variant pose and a breahtaking Samurai girl alt pose
Gnish Gnosh - Professionally pre-supported
Sculpted for Bloody Sword Miniatures by Artisan Guild and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Goblin Warlock - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Orc King and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Goliath Barbarian 2-Handed Weapon - - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Pit Fighter Name Tags by Warg'Name
These attach easily to 30 and 40mm bases. These are NOT customizable! One name tag for every Champion in the game!
Sculpted for Bloody Sword Miniatures by Warg'Name
Human Gunslinger or Crossbow expert! - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Artisan Guild and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller. Now with an extra separate body for use with crossbows!
Multiple Weapon Options! Crossbows and Guns included!
Halfling Rogue - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Epic Adventure Miniatures and professionally pre-supported for you by 3dprintingpro!
Comes with optional treasure chest with a broken lock for basing!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Hikkiyori Swordmaster -Toad Samurai - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by CobraMode Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
3 Exclusive Hexton Hill Arena Tiles
Sculpted for Bloody Sword Miniatures by Graven Guild (Hexton Hills) and exclusive to the Pit Fighter Kickstarter
Human Fighter Knight - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by RN Estudios and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Lizardman Champion - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Josh Hardie and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Lizardman Chieftain - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Codex Universalis and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Minotaur Champion - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Tytan Troll Miniatures and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Ogre Champion - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Orc Berserker- Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! Axe, Sword, and Hammer
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Samurai - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Twin Goddess Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Spartan Fighter - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Clay Cyanide Miniatures and professionally pre-supported for you by 3dprintingpro!
Multiple Weapon Options! Comes with Sword and Spear!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Predator Spider - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Print Your Monsters and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Tabaxi Samurai Fighter - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Kyoushuneko Miniatures and professionally pre-supported for you by 3dprintingpro!
Comes with spear and sword options!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
The Finisher! Human Fighter - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Kraken Studios and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Rat Vendor
PLEASE NOTE, This is not for sale by the Merchants!
Thri-Keen Champion
Sculpted for Bloody Sword Miniatures by GloomyKid Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Props for The Finisher
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Sculpted for Bloody Sword Miniatures by Kraken Studios and professionally pre-supported for you by 3dprintingpro!
Tortle Monk - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Arcane Minis and professionally pre-supported for you by 3dprintingpro!
Comes with 3 part staff, Bo staff and hook swords!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
PIT FIGHTER UPDATE 1
The first major update with:
1. Harpy unsupported body added;
2. Civilized Ogre supports on horn fix;
3. Bugbear unsupported weapons added;
4. Tortle Monk hook swords properly sized;
5. Samurai Girl added supports around sword tip;
6. Tentacle B with supports for the Ice Arena;
7. Elf Warlock Minion 1 Chitubox files correctly loaded;
8. Centaur left hand shield supported Chitubox model loaded;
AND IN THEIR OWN NEW FILES
9. Rat Vendor added! yes! (remove supports from those rats with great care or you'll be gluing rats back on like I was!);
10. Fans and Stands Add-on, supported for resin - but the stands need a larger printer (Saturn, E10, Sonic Mighty, Anycubic Mono X), and another heads up these are supported with Lychee which is a free download;
11. Finisher's Props loaded; and
12. Firbolg loaded in.
Troll Champion - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Atlantis Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller. He stands 54mm tall, would be 60mm standing straight up.
Vampire Lord - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Artisan Guild and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Skeleton Pirate Captain- Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by RN Estudios and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Warforged Fighter - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Arcane Minis and professionally pre-supported for you by 3dprintingpro!
Comes with insane 6 weapon options!!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Werebear - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Epics N Stuff Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Wu-Kong - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Twin Goddess Miniatures and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Snake Man Fighter - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Lost Adventures Company and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Pit Fighter arena bases
These bases have a beveled bottom they are made to print flat to the plat on resin printers!
Dungeon bases, Snow and Ice bases, and grass and stone bases
Cast N Play Free Gift House
Free Gift from Cast N Play to you wonderful backers! Not really meant for other people to buy that's why the price is so high :P
City of Tarok Modular Guard Tower and Dice Tower
Free gift to my KS backers, not meant for sale, thus the price!
Gnome Artificer in Mech Suit - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Chris Tackett and professionally pre-supported for you by 3dprintingpro!
Comes with multiple weapons AND a Skies of Sordane gun variant model!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Harpy Queen - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Crippled God Foundry and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Stables from Kingdom of Tiradom
Free gift for my backers from the Kingdom of Tiradom Kickstarter
Not meant for re-sale thus the high price :)
Halfling House
Free Gift from Dark Realms studios for my backers, not meant for sale thus the high price :)
Pit Fighter Game Pieces - Battle Planner and Tokens
Battle Planner and Condition Tokens and Dice
Pit Fighter Arenas - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by The Dragon's Rest and professionally pre-supported for you by 3dprintingpro!
You get the pre-supported .stl, the chitubox file (in case you want to mess with the supports) and the unsupported .stl as well!
Xorn - Professionally pre-supported!
Sculpted for Bloody Sword Miniatures by Paul Taylor and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Human Bard - Professionally pre-supported!
sculpted for Bloody Sword Miniatures by Miniatures of Madness and professionally pre-supported for you by 3dprintingpro!
The figure comes in 34mm scale but can easily be scaled larger or smaller.
Merchant Level - this gives you the right sell single prints of the .stl files, the game pieces and all the rewards from the KS for one full year (and change). The license will expire on December 31, 2021, at which time it can be renewed. EXCLUDED FROM THIS LICENSE are all the FREE GIFTS from the campaign (more detailed license agreement is available on request). You must contact these artists directly for merchant licenses. You may not mass produce or sell figures made from molds based on these .stls. You may not alter or modify the .stl files in any way. You must clearly list the models as being from the Pit Fighter Kickstarter, display the Bloody Sword Miniatures logo and inform users that original .stl files may be purchased from a late pledge or on MyMiniFactory. A more detailed license agreement will be made available to all merchants. Go make some money off this! :)