Skeletal Army
Created by Runeforge
This set contains over 100 models including Infantry, Cavalry, Siege Engines, Carts, Wagons, Skeletal Dogs, Skeletal Mammoths, Skeletal Ogres, Skeletal Spell Casters, Bone Dragons, Reapers, and a Lich to lead them all. - everything you need to 3D print a great undead wargame army or enemies to terrorize your RPG players. All models in this set come in 3 versions: Presupported, Unsupported, and a Lychee file (in case you'd like to edit a few of the supports yourself.) No models come pre-attached to bases. We have included 11 Stylized bases - 6 for standard-sized models. 4 for cavalry-sized models, and 1 for mammoths. We have also included a stem for the flying dragon to rest on. All models in this set have been designed so that even the large ones can be printed on a small printer. Large models have been cut and keyed so that they are easy to assemble. The models in this set were test printed with 60% Epax Hard resin mixed with 40% Siraya Tenacious on an Elegoo Mars 2 Pro using the following settings: Layer height: 0.05mm Bottom Layer Count: 6 Exposure Time: 3 seconds Bottom Exposure Time: 25 seconds Light-off Delay: 0 seconds Bottom Light-off Delay: 0 Seconds Bottom Lift Distance: 15mm Lifting Distance: 12mm Bottom Lift Speed 40mm/min Lifting Speed: 40mm/min Retract Speed: 150mm/min
Skeletal Army
Created by Runeforge- Pledges (2)
- Add-ons (2)
- View on Kickstarter
Pledges
56 backers
USD 149.95
This pledge tier grants a lifetime license to all files for commercial use. All files included in this set are complete and ready for print. - No waiting!
436 backers
USD 49.95
This pledge tier grants access to all files for personal use. All files included in this set are complete and ready for print. - No waiting!
Add-ons
USD 29.95
This bundle includes 16 models:
A supported version of each
An Unsupported Version of each
the Lychee file (editable supports) of each
A render
Photographs
The model in the photographs was printed with 60% Epax Hard resin mixed with 40% Siraya Tenacious on an Elegoo Mars 2 Pro using the following settings:
Layer height: 0.05mm
Bottom Layer Count: 6
Exposure Time: 3 seconds
Bottom Exposure Time: 25 seconds
Light-off Delay: 0 seconds
Bottom Light-off Delay: 0 Seconds
Bottom Lift Distance: 15mm
Lifting Distance: 12mm
Bottom Lift Speed 40mm/min
Lifting Speed: 40mm/min
Retract Speed: 150mm/min
USD 14.95
This bundle includes 7 models:
A supported version of each
An Unsupported Version of each
the Lychee file (editable supports) of each
A render
Photographs
The model in the photographs was printed with 60% Epax Hard resin mixed with 40% Siraya Tenacious on an Elegoo Mars 2 Pro using the following settings:
Layer height: 0.05mm
Bottom Layer Count: 6
Exposure Time: 3 seconds
Bottom Exposure Time: 25 seconds
Light-off Delay: 0 seconds
Bottom Light-off Delay: 0 Seconds
Bottom Lift Distance: 15mm
Lifting Distance: 12mm
Bottom Lift Speed 40mm/min
Lifting Speed: 40mm/min
Retract Speed: 150mm/min