Starship IV Chimera
Created by 2ndDynasty
Welcome to the Pledge Manager for Starship IV Chimera. Whether you are a returning Kickstarter backer looking to adjust your pledge, or looking to make a late pledge, this is the place to do it!
This campaign is finished
Starship IV Chimera
Created by 2ndDynasty- Pledges (7)
- Add-ons (19)
- View on Kickstarter
- Updates
Pledges
242 backers
USD 82.20
Starship Chimera Upgrade Pledge ~$83 USD FOR RETURNING BACKERS ONLY - WILL BE INCOMPLETE FOR NEW BACKERS. Returning backer from previous Kickstarters? This pledge includes ONLY the new components, not the old ones that you already have. Recommended for returning Collectors. INCLUDES: Starship Chimera STL Files Starship Chimera Stretch Goal STL Files Campaign-Exclusive Add-On STLs Non-Commercial Printing License New STL Files ONLY
186 backers
USD 154.20
Fleet Commander ~$155 USD Get all four starships we have released to date, AND all Kickstarter-exclusive Stretch Goals! This allows for more than 30 ship variants and combinations. INCLUDES: Starship Chimera STL Files Starship Chimera Stretch Goal STL Files Shuttle Alpha, Scoutship Beta and Transport Delta STL Files Ship Variant STL Files Non-Commercial Printing License
108 backers
USD 308.30
The Collector IV ~$311 USD Get everything from 2nd Dynasty to date, including of course all stretch goals, kickstarter exclusives, four complete starships (Shuttle Alpha, Scout Ship Beta, Transport Delta and the Chimera) and over 20 variants, hundreds of interior tiles and add-ons. INCLUDES: Everything to Date (STLs only) Non-Commercial Printing License
49 backers
USD 102.80
All-In ~$103 USD Get Starship Chimera, all campaign Stretch Goals, AND all campaign exclusive Add-Ons at a reduced amount. Value of campaign-exclusive Add-Ons approximately 550 SEK. If previously backed as a Collector in Starship III, this will update your collection to complete once again. INCLUDES: Starship Chimera STL Files Starship Chimera Stretch Goal STL Files Campaign-Exclusive Add-On STLs Non-Commercial Printing License
38 backers
USD 1.00
Ship's Passage ~$1 USD For those who wanted to follow the campaign or reserve funds for the post campaign.
86 backers
USD 61.70
Starship Chimera ~$62 USD Get the Starship Chimera STL files and all campaign stretch goals. INCLUDES: Starship Chimera STL Files Starship Chimera Stretch Goal STL Files Non-Commercial Printing License
13 backers
USD 30.80
Chimera Pathfinder ~$31 USD Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one caveat: NO STRETCH GOALS INCLUDED This is Starship Chimera Pathfinder only! INCLUDES: Starship Chimera Pathfinder STL Files Non-Commercial Printing License No Stretch Goals Included
Add-ons
Starship II Core Pledge
USD 57.00
Create your own starship deckplans with these tiles from Starship II Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Starship II Core Pledge corresponds the Lieutenant Pledge in the Starship II Kickstarter. For more details, follow this link:
Long Transport Delta Variant
USD 10.00
Current Version: 1.1.1
Expand your Transport Delta deck plans with these lengthening tiles, suitable for use with 28-32mm miniatures. Compatible with 2nd Dynasty's Starship Transport Delta tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Starship I Core Pledge
USD 69.00
Current Version: 1.1 (13/07/2020) Gunship - Turret 1.1.stl update
Create your own starship deckplans with these tiles from Starship I Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Starship I Core Pledge corresponds the Commander Pledge in the Starship I Kickstarter. For more details, follow this link:
Crew Miniatures II
USD 10.00
Current version: 1.1 - 17/09/2020
This pack contains five sitting crewmembers, including a female captain, male pilot with and without helmet, and a male tech with and without helmet.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Starfighter Modular System
USD 19.95
Current version: 1.4 - Compatible with Operation Maelstrom
Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. With almost 50 components, you can make a wide variety of combinations, and mix and match them with some of your favourite turret weapons from Turrets Pack I, or attach these weapon points on your existing hardpoints from Starship III!
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package
Starship III Core Pledge
USD 91.00
Seek adventure amongst the stars! Explore strange new worlds, smuggle illicit cargos across the hyperspace lanes or launch a space to ground assault, in your Scout Ship, Transport, or Space Shuttle!
Starship III Core Pledge includes three original, fully 3D-printable spaceships scaled for 28mm play in your favourite Tabletop RPGs or Wargames. The ships are detailed inside and out and a variety of configurations can be used to customise the deck plans.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Starship III Core Pledge corresponds the All-In Pledge in the Starship III Kickstarter. For more details, follow this link:
Turrets Pack II
USD 10.00
Expand your Starship deck plans with these turrets pack II tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Double Laser Lens Turret (Larger).stl
Double Laser Lens Turret.stl
Gun Turret Type 1.stl
Gun Turret Type 2.stl
Missile Turret Base.stl
Missile Turret Rack.stl
Scout Ship Turret Barrel.stl
Single Laser Lens Turret (Larger).stl
Single Laser Lens Turret.stl
Single Laser Lens Type 2 Turret.stl
Single Laser Lens Type 3.stl
Triple Laser Lens Turret (Larger).stl
Triple Laser Lens Turret.stl
Turrets Pack III
USD 10.00
Expand your Starship deck plans with these Turrets pack III tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Airlock Turret.stl
Drone Chicken Legs.stl
Drone Head.stl
Drone Quad Legs.stl
I Internal Drone Tube.stl
Radar Array Turret.stl
Radar Dish Turret.stl
Spotlight Turret.stl
Habitation II
USD 15.00
Expand your Starship deck plans with these habitation tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Double Counter Combo (unbased).stl
Double Counter Storage (unbased).stl
Double Counter Washers (unbased).stl
I Single Counter Storage.stl
I Single Counter Washer.stl
S Double Counter Combo.stl
S Double Counter Storage.stl
S Double Counter Washers.stl
Single Counter Storage (unbased).stl
Single Counter Washer (unbased).stl
A Kitchen Counter.stl
A Kitchenette.stl
kitchenwall_01.stl
kitchenwall_02.stl
Baseless Food Dispencer.stl
Baseless Trash Disposal.stl
I Food Dispencer.stl
I Trash Disposal.stl
Special Bunk Free Standing.stl
Special Double Bed Variant 1.stl
Special Double Bed Variant 2.stl
Special Single Bed Free Standing.stl
DoorTypeC.stl
Habitation Room Variant 1.stl
Habitation Room Variant 2.stl
II Corner Shower-WC combo.stl
Single Chair.stl
Sofa.stl
Table.stl
Transport Delta Kickstarter Edition
USD 40.00
Current Version: 2.0 (Delta 1700-Series) (22/12/2023)
Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
Create your own full scale printable 3D transport craft, with modular interior and cutaway structure!
- The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The transport has larger parts, and requires a medium sized print bed that can fit 215mm/8.5 inches
Contains over 80 parts
Largest part is 176×62×140mm (7×2.5×5.5")Can be rotated to fit 156×140×140mm (6.1×5.5×5.5")
Longest part is 215×155×35mm (6×8.5×1.4”)
There are some additional margins if parts are rotated, etc.
Also includes all Transport Delta-related stretch goals from Starship III Kickstarter.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Space Shuttle Alpha Kickstarter Edition
USD 26.00
Version: 2.6.5 - 28/10/2021
Need a way to get your units from the ground to orbit? This shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
Modular interior – customise the layout however you like using other Starship or compatible tiles
Alternate parts for large and small print beds
High and low detail versions
Contains over 50 pieces
Low support requirements
Create your own full scale printable 3D shuttle craft, with modular interior and cutaway structure!
Also includes all Space Shuttle Alpha-related stretch goals from Starship III Kickstarter.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Hammerhead Scout Variant
USD 13.95
Version: 2.0 - implemented the new high fidelity exterior and interior, including 3mf print beds that you can import for easy printing. Instructions coming soon.
Modify your Scout Ship Beta or Beta Centauri to add a huge new hammerhead nose to the Beta series. This provides a huge space for a fleet command bridge or to plenty of space to further expand your starship, essentially doubling the interior volume, including the split level. Includes four additional standard turret ports (port, starboard, ventral and dorsal). Comes with an expanded bridge layout as default.
Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
These tiles are commercially available versions of 2nd Dynasty's 2019 Starship IV Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Medical Pack
USD 10.00
CURRENT VERSION: 1.0
Fully realise a medical bay or science lab aboard your vessel, space station or colony. Includes medical beds, scanners, sample storage and body scanners for diagnosing that alien parasite or collecting samples of alien flora and fauna.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes 18 high detail tiles, including:
- S and A Sample Wall storage
S-Wall and regular wall medical operating tables
S Specimen Tables
Standalone large and small specemin containers
Body scanner
Sample Table
Turrets Pack I
USD 10.00
CURRENT VERSION: 1.1
Expand your Starship deck plans with these turret tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- cannon_launcher_turret_base.stl
cannon_launcher_turret_bottom.stl
cannon_launcher_turret_top.stl
Rotary Laser Lens Turret 1.1.stl
Rotary Laser Lens Turret.stl
Single Auto Turret.stl
Twin Auto Turret 1.1.stl
Twin Auto Turret.stl
Twin Manned Turret 1.1.stl
Twin Manned Turret.stl
Single Beam Cannon.stl
Single Cannon.stl
Single Laser.stl
Triple Laser.stl
Double Beam Cannon Left.stl
Double Beam Cannon Right.stl
Quad Cannon.stl
Single Cannon.stl
Single Laser.stl
Triple Cannon Left.stl
Triple Cannon Right.stl
Double Beam Cannon Clip Opposite.stl
Double Beam Cannon Clip.stl
Laser Cannon Clip.stl
Quad Cannon Clip.stl
Single Cannon Clip.stl
Single Cannon Variant Clip.stl
Single Laser Clip.stl
Triple Cannon Clip.stl
Triple Cannon Large Clip.stl
Crew Miniatures
USD 10.00
This pack contains five sitting crewmembers, including a captain, pilot with and without helmet, and tech with and without helmet. Bridge furniture is also included.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, and printing on a 45 degree angle will produce a smoother print.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Captain Seated
- Tech Seated
- Tech Seated with helmet
- Pilot Seated
- Pilot Seated with helmet
- Pilot Seated
- Pilot Control Panel
- Tech Control Panel
- Crew Seat
- Captain's Chair
Scout Ship Beta Kickstarter Edition
USD 89.99
CURRENT VERSION: 1.3.4
Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
Modular interior – customise the layout however you like using other Starship or compatible tiles
Contains over 50 pieces
Minimal support requirements
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!
Also includes all Scout Ship Beta-related stretch goals from Starship III on Kickstarter.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Security Pack
USD 10.00
CURRENT VERSION: 1.1 - Security Scanner updated
Add security stations, brigs and prison cells to your starship deck plans!
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes 18 high detail tiles, including:
- Size E and size I floor turrets, articulated
II Weapons lockers
Cell doors
Security doorway
Laser door
Security scanner
Security control pannel
Gantry Pack
USD 10.00
Current Version: 1.1 - 16/09/2020
Expand your Starship deck plans with these gantry pack tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
Turrets Pack IV
USD 10.00
Expand your Starship deck plans with these turrets pack IV tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.