TribesStoreCrowdfundingStoriesCompetitionsMMF+

Starship IV Chimera

Created by 2ndDynasty's Avatar 2ndDynasty

Welcome to the Pledge Manager for Starship IV Chimera. Whether you are a returning Kickstarter backer looking to adjust your pledge, or looking to make a late pledge, this is the place to do it!

This campaign is finished

Starship IV Chimera

Created by 2ndDynasty's Avatar 2ndDynasty

Pledges

242 backers

USD 82.20

Includes 9 products

Starship Chimera Upgrade Pledge
~$83 USD

FOR RETURNING BACKERS ONLY - WILL BE INCOMPLETE FOR NEW BACKERS.

Returning backer from previous Kickstarters? This pledge includes ONLY the new components, not the old ones that you already have. Recommended for returning Collectors.

INCLUDES:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Campaign-Exclusive Add-On STLs
Non-Commercial Printing License
New STL Files ONLY

186 backers

USD 154.20

Includes 19 products

Fleet Commander
~$155 USD

Get all four starships we have released to date, AND all Kickstarter-exclusive Stretch Goals! This allows for more than 30 ship variants and combinations.

INCLUDES:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Shuttle Alpha, Scoutship Beta and Transport Delta STL Files
Ship Variant STL Files
Non-Commercial Printing License

105 backers

USD 308.30

Includes 25 products

The Collector IV
~$311 USD

Get everything from 2nd Dynasty to date, including of course all stretch goals, kickstarter exclusives, four complete starships (Shuttle Alpha, Scout Ship Beta, Transport Delta and the Chimera) and over 20 variants, hundreds of interior tiles and add-ons.

INCLUDES:
Everything to Date (STLs only)
Non-Commercial Printing License

48 backers

USD 102.80

Includes 9 products

All-In
~$103 USD

Get Starship Chimera, all campaign Stretch Goals, AND all campaign exclusive Add-Ons at a reduced amount.

Value of campaign-exclusive Add-Ons approximately 550 SEK.

If previously backed as a Collector in Starship III, this will update your collection to complete once again.

INCLUDES:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Campaign-Exclusive Add-On STLs
Non-Commercial Printing License

38 backers

USD 1.00

Ship's Passage
~$1 USD

For those who wanted to follow the campaign or reserve funds for the post campaign.

86 backers

USD 61.70

Includes 3 products

Starship Chimera
~$62 USD

Get the Starship Chimera STL files and all campaign stretch goals.

INCLUDES:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Non-Commercial Printing License

13 backers

USD 30.80

Includes 1 product

Chimera Pathfinder
~$31 USD
Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one caveat:

NO STRETCH GOALS INCLUDED

This is Starship Chimera Pathfinder only!

INCLUDES:
Starship Chimera Pathfinder STL Files
Non-Commercial Printing License
No Stretch Goals Included

Add-ons

Starship II Core Pledge's Cover

Starship II Core Pledge

USD 57.00

Create your own starship deckplans with these tiles from Starship II Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Starship II Core Pledge corresponds the Lieutenant Pledge in the Starship II Kickstarter. For more details, follow this link:

https://www.kickstarter.com/projects/2nddynasty/starship-ii-3d-printable-openlock-compatible-deck?ref=nav_search&result=project&term=2nd%20dynasty

 

Long Transport Delta Variant's Cover

Long Transport Delta Variant

USD 10.00

Expand your Transport Delta deck plans with these lengthening tiles, suitable for use with 28-32mm miniatures. Compatible with 2nd Dynasty's Starship Transport Delta tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Starship I Core Pledge's Cover

Starship I Core Pledge

USD 69.00

Current Version: 1.1 (13/07/2020) Gunship - Turret 1.1.stl update

Create your own starship deckplans with these tiles from Starship I Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Starship I Core Pledge corresponds the Commander Pledge in the Starship I Kickstarter. For more details, follow this link:

https://www.kickstarter.com/projects/2nddynasty/starship-3d-printable-openlock-compatible-deck-pla?ref=nav_search&result=project&term=2nd%20dynasty

 

Crew Miniatures II's Cover

Crew Miniatures II

USD 10.00

Current version: 1.1 - 17/09/2020

This pack contains five sitting crewmembers, including a female captain, male pilot with and without helmet, and a male tech with and without helmet.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. 

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Starfighter Modular System's Cover

Starfighter Modular System

USD 17.00

Current version: 1.3.2 - Assembly instructions added

Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. With almost 50 components, you can make a wide variety of combinations, and mix and match them with some of your favourite turret weapons from Turrets Pack I, or attach these weapon points on your existing hardpoints from Starship III!

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package

Starship III Core Pledge's Cover

Starship III Core Pledge

USD 91.00

Seek adventure amongst the stars! Explore strange new worlds, smuggle illicit cargos across the hyperspace lanes or launch a space to ground assault, in your Scout Ship, Transport, or Space Shuttle!

Starship III Core Pledge includes three original, fully 3D-printable spaceships scaled for 28mm play in your favourite Tabletop RPGs or Wargames. The ships are detailed inside and out and a variety of configurations can be used to customise the deck plans.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Starship III Core Pledge corresponds the All-In Pledge in the Starship III Kickstarter. For more details, follow this link:

https://www.kickstarter.com/projects/2nddynasty/starship-iii-fully-3d-printable-28mm-spaceships?ref=nav_search&result=project&term=2nd%20dynasty

 

Turrets Pack II's Cover

Turrets Pack II

USD 10.00

Expand your Starship deck plans with these turrets pack II tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

  • Double Laser Lens Turret (Larger).stl
    Double Laser Lens Turret.stl
    Gun Turret Type 1.stl
    Gun Turret Type 2.stl
    Missile Turret Base.stl
    Missile Turret Rack.stl
    Scout Ship Turret Barrel.stl
    Single Laser Lens Turret (Larger).stl
    Single Laser Lens Turret.stl
    Single Laser Lens Type 2 Turret.stl
    Single Laser Lens Type 3.stl
    Triple Laser Lens Turret (Larger).stl
    Triple Laser Lens Turret.stl

Turrets Pack III's Cover

Turrets Pack III

USD 10.00

Expand your Starship deck plans with these Turrets pack III tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

  • Airlock Turret.stl
    Drone Chicken Legs.stl
    Drone Head.stl
    Drone Quad Legs.stl
    I Internal Drone Tube.stl
    Radar Array Turret.stl
    Radar Dish Turret.stl
    Spotlight Turret.stl

Habitation II's Cover

Habitation II

USD 15.00

Expand your Starship deck plans with these habitation tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

  • Double Counter Combo (unbased).stl
    Double Counter Storage (unbased).stl
    Double Counter Washers (unbased).stl
    I Single Counter Storage.stl
    I Single Counter Washer.stl
    S Double Counter Combo.stl
    S Double Counter Storage.stl
    S Double Counter Washers.stl
    Single Counter Storage (unbased).stl
    Single Counter Washer (unbased).stl
    A Kitchen Counter.stl
    A Kitchenette.stl
    kitchenwall_01.stl
    kitchenwall_02.stl
    Baseless Food Dispencer.stl
    Baseless Trash Disposal.stl
    I Food Dispencer.stl
    I Trash Disposal.stl
    Special Bunk Free Standing.stl
    Special Double Bed Variant 1.stl
    Special Double Bed Variant 2.stl
    Special Single Bed Free Standing.stl
    DoorTypeC.stl
    Habitation Room Variant 1.stl
    Habitation Room Variant 2.stl
    II Corner Shower-WC combo.stl
    Single Chair.stl
    Sofa.stl
    Table.stl

Transport Delta Kickstarter Edition's Cover

Transport Delta Kickstarter Edition

USD 31.00

Current Version: 1.4.5 (04/09/2020)

Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.

Create your own full scale printable 3D transport craft, with modular interior and cutaway structure!

  • The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
    Modular interior – customise the layout however you like using other Starship or compatible tiles
    The transport has larger parts, and requires a medium sized print bed that can fit 215mm/8.5 inches
    Contains over 80 parts
    Largest part is 176×62×140mm (7×2.5×5.5")Can be rotated to fit 156×140×140mm (6.1×5.5×5.5")
    Longest part is 215×155×35mm (6×8.5×1.4”)
    There are some additional margins if parts are rotated, etc.

Also includes all Transport Delta-related stretch goals from Starship III Kickstarter.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. 

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Space Shuttle Alpha Kickstarter Edition's Cover

Space Shuttle Alpha Kickstarter Edition

USD 26.00

Version: 2.6.4 - 04/09/2020

Need a way to get your units from the ground to orbit? This shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.

Modular interior – customise the layout however you like using other Starship or compatible tiles
Alternate parts for large and small print beds 
High and low detail versions
Contains over 50 pieces
Low support requirements
Create your own full scale printable 3D shuttle craft, with modular interior and cutaway structure!

Also includes all Space Shuttle Alpha-related stretch goals from Starship III Kickstarter.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. 

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Hammerhead Scout Variant's Cover

Hammerhead Scout Variant

USD 10.00

Current Version: 1.1.1 - Fix for turret ring with teeth

Expand your Scout Ship Beta deck plans with these hammerhead tiles, suitable for use with 28-32mm miniatures. Compatible with 2nd Dynasty's Scout Ship Beta tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Medical Pack's Cover

Medical Pack

USD 10.00

CURRENT VERSION: 1.0

Fully realise a medical bay or science lab aboard your vessel, space station or colony. Includes medical beds, scanners, sample storage and body scanners for diagnosing that alien parasite or collecting samples of alien flora and fauna.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes 18 high detail tiles, including:

  • S and A Sample Wall storage
    S-Wall and regular wall medical operating tables
    S Specimen Tables
    Standalone large and small specemin containers
    Body scanner
    Sample Table

Turrets Pack I's Cover

Turrets Pack I

USD 10.00

CURRENT VERSION: 1.1

Expand your Starship deck plans with these turret tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

  • cannon_launcher_turret_base.stl
    cannon_launcher_turret_bottom.stl
    cannon_launcher_turret_top.stl
    Rotary Laser Lens Turret 1.1.stl
    Rotary Laser Lens Turret.stl
    Single Auto Turret.stl
    Twin Auto Turret 1.1.stl
    Twin Auto Turret.stl
    Twin Manned Turret 1.1.stl
    Twin Manned Turret.stl
    Single Beam Cannon.stl
    Single Cannon.stl
    Single Laser.stl
    Triple Laser.stl
    Double Beam Cannon Left.stl
    Double Beam Cannon Right.stl
    Quad Cannon.stl
    Single Cannon.stl
    Single Laser.stl
    Triple Cannon Left.stl
    Triple Cannon Right.stl
    Double Beam Cannon Clip Opposite.stl
    Double Beam Cannon Clip.stl
    Laser Cannon Clip.stl
    Quad Cannon Clip.stl
    Single Cannon Clip.stl
    Single Cannon Variant Clip.stl
    Single Laser Clip.stl
    Triple Cannon Clip.stl
    Triple Cannon Large Clip.stl

Crew Miniatures's Cover

Crew Miniatures

USD 10.00

This pack contains five sitting crewmembers, including a captain, pilot with and without helmet, and tech with and without helmet. Bridge furniture is also included.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, and printing on a 45 degree angle will produce a smoother print.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

  • Captain Seated
  • Tech Seated
  • Tech Seated with helmet
  • Pilot Seated
  • Pilot Seated with helmet
  • Pilot Seated
  • Pilot Control Panel
  • Tech Control Panel
  • Crew Seat
  • Captain's Chair

Scout Ship Beta Kickstarter Edition's Cover

Scout Ship Beta Kickstarter Edition

USD 41.00

CURRENT VERSION: 1.3.4

Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.

Modular interior – customise the layout however you like using other Starship or compatible tiles
Contains over 50 pieces
Minimal support requirements
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!

Also includes all Scout Ship Beta-related stretch goals from Starship III on Kickstarter.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Security Pack's Cover

Security Pack

USD 10.00

CURRENT VERSION: 1.1  - Security Scanner updated

Add security stations, brigs and prison cells to your starship deck plans!

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes 18 high detail tiles, including:

  • Size E and size I floor turrets, articulated
    II Weapons lockers
    Cell doors
    Security doorway
    Laser door
    Security scanner
    Security control pannel

Gantry Pack's Cover

Gantry Pack

USD 10.00

Current Version: 1.1 - 16/09/2020

Expand your Starship deck plans with these gantry pack tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Turrets Pack IV's Cover

Turrets Pack IV

USD 10.00

Expand your Starship deck plans with these turrets pack IV tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.