The Lost Dragons: 3D Printable Fantasy Dragons
Created by 
TheLostAdventuresCo
The Lost Dragons is a collection of premium 3D model dragons designed for tabletop role-playing games and war games.
The Lost Dragons: 3D Printable Fantasy Dragons
Created by TheLostAdventuresCo
- Pledges (1)
- Add-ons (0)
- View on Kickstarter
Pledges
2126 backers
USD 85.00
Fairy Dragon
The Fairy Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 3'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 4'' - 6'')
Special Features:
1. Themed fully textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Fairy Dragon requires supports to print.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Fairy Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Armored Guardian Dragon
The Armored Guardian is a premium, 3D printable dragon for roleplaying or tabletop games.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
200x200x200mmSUPPORTS: Requires supports
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Armored Guardian Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Armored Guardian Dragon (Alternate Pose)
The Armored Guardian Alternate Pose is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Scalable?: Yes
Required Print Volume: 200x200x200mm
Pre-split into eight pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
The Armored Guardian Dragon Alternate Pose requires supports to print, and comes in a split and unsplit version for your printing preference.
NOTE: An additional base is required for stabilizing the tail. Any 4'' base or above will work.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Armored Guardian Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. The original Armored Guardian pose can be found HERE.
Blight Dragon
The Blight Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 4'' - 6'')
Special Features:
1. Poison/swamp-themed fully textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Blight Dragon requires supports to print.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Clockwork Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Blue Guardian Dragon
The Blue Guardian is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 4'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200
The Blue Guardian Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Blue Guardian Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Clockwork Dragon
The Clockwork Dragon is a premium, 3D printable dragon for roleplaying or tabletop games that prints with no slicer supports required.
Format: STL (digital format for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 4'' - 6'')
Special Features:
1. No slicer supports required for printing!
2. Rotating, posable neck and head pieces to make it feel just a little more special on your table.
3. 5'' Textured, Clockwork-themed base
4. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Clockwork Dragon requires no supports to print.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Clockwork Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Clockwork Dragon (Alternate Pose)
The Clockwork Dragon Alternate Pose is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: No Round Base - Approximately 100mm x 100mm base footprint
Scalable?: Yes (scaling up only with FDM)
Special Features:
1. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Clockwork Dragon Alternate Pose requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Clockwork Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. The original Clockwork Dragon Alternate Pose can be found HERE.
Core Variant Dragonborn + Weapons/Shields Pack (Set 1)
The Variant Dragonborn are a set of 4 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 4 Unique, Variant Dragonborn - Inspired by the Flame/Ice Dragons from the Lost Dragons Kickstarter, and all with unique poses.
2. Incredible Customization: Arm your Dragonborn with a weapon and optional shield of your choice. Choose from a pack of 8 fire and ice-themed weapons and 4 shields included for posing and customization with each miniature.
Required Print Volume: 100x100x100mm
The Dragonborn Variant Miniatures and weapons/shields requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragonborn Variant Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Dead Dragon Marker (White Guardian)
The Dead Dragon Marker is a premium, 3D printable terrain piece for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Size: 100.37mm x 101.56mm x 37.26mm
Scalable?: Yes
Special Features:
1. Supportless: No slicer generated supports are required for any of these prints. Woohoo!
2. Features a very dead, lacerated, and bruised version of the White Guardian.
3. Prints on beds as small as 120x120x120mm.
Required Print Volume: 150x150x150mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Frozen and Burned Cottages are a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. \n \n
Dragon Egg Scatter Set (Set of 8)
Our Dragon Egg Scatter Set is an 8-piece set of premium, 3D printable terrain scatter for roleplaying or tabletop games. These eggs are all unbased and print with NO supports required!
Format: STL (digital format for 3D printing)
Default Size: Various tile sizes
Scalable?: Yes
Special Features:
1. Various Egg Themes: Each dragon egg has a different theme including flame, ice, forest, earth, shadow, water, blight/poison), and storm.
2. Supportless: No slicer generated supports are required for any of these prints. Woohoo!
3. Prints on beds as small as 100x100x100mm.
Required Print Volume: 100x100x100mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Lava Dungeon Tile Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Dragon Hunters Miniatures Set
The Dragon Hunters are a set of 3 premium, 3D printable miniatures for roleplaying games and wargames.
Format: STL (digital format for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 3 Unique Dragon Hunters - One human, one half-orc, and one dwarf come together for one purpose: to be every dragon's worst nightmare.
Required Print Volume: 50x50x50mm
The Dragon Hunters Miniatures Set require supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragon Hunters Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Dragon-Scarred Outpost Set (5 Parts)
The Daragon-Scarred Outpost Set is a 5-part, premium, 3D printable terrain piece for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: Varied
Scalable?: Yes
Special Features:
1. 5 Different Parts - Dragon Scar Building (2 parts), Dragon Scar Gate (5 parts), 2-Story Dragon Scar Tower (4 parts), Dragon Scar Walls (2 ruined, 2 regular), Melted Statue (2 parts)
2. No Supports Required - None of these models require supports to print. Woohoo!
Required Print Volume: 200x200x200mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Damaged Outpost Scatter was a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. \n \n
Earth Dragon
The Earth Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 6'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 6'')
Special Features:
1. 6'' Textured, Earth-themed base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Earth Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Earth Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Earth Variant Dragonborn: Earthborn Monk & Barbarian
The Earth Variant Dragonborn: Earthborn Monk & Barbarian are a set of 2 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 2 Unique Earth Variant Dragonborn - Inspired by the Earth Dragon from the Lost Dragons Kickstarter, each with unique poses and bases.
2. Monk - No Support Generation Required. Yay!
3. Barbarian - Pre-Generated Supported Model Included (For FDM, but can be used with resin as well). Non pre-supported version included as well.
4. Based and unbased versions also included in this set.
Required Print Volume: 100x100x100mm
The Dragonborn Variant Miniatures requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragonborn Variant Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Elemental Queen Dragon
The Elemental Queen Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Scalable?: Yes
Required Print Volume: 200x200x200mm
Pre-split into 21 pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
The Elemental Queen Dragon requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Elemental Queen Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Fire Twin Dragon
The Fire Twin is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 3'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 4'')
Special Features:
1. Prints COMPLETELY Supportless: Files with pre-generated supports included.
2. Two Bases: 3'' Textured base, and a partially textured 4'' base (alternate scale)
3. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200 build volume.
Recommended Print Volume: 200x200x200mm
The Fire Twin does not requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Fire Twin is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Flame Cultists (Set of 6 +3 Variants)
The Flame Cultists are a set of 9 premium, 3D printable miniatures for roleplaying games and wargames.
Format: STL (digital format for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter) and Unbased
Scalable?: Yes
Special Features:
1. 6 Unique Flame Cultists - 2 Tribal Warriors, 2 Fire-touched Brawlers, 2 Fire-touched Spellcasters
2. 3 "Scarred" Variants - Scarred variants representing "fire-touched" tattoos of devotion.
Required Print Volume: 50x50x50mm
The Flame Cultists Miniatures Set require supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Flame Cultists Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Flame Dragon (Molten Mother)
The Flame Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 6'')
Special Features:
1. Textured base: 5'' Rock & lava textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200 build volume.
Recommended Print Volume: 200x200x200mm
The Flame Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Flame Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Flame Dragon (Molten Mother) Alternate Pose
The Flame Dragon (Alternate Pose) is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 6'')
Special Features:
1. Textured base: 5'' Rock & lava textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200 build volume.
Recommended Print Volume: 200x200x200mm
The Flame Dragon (Alternate Pose) requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Flame Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Flame Dragonborn (Set of 9)
The Flame Dragonborn (Set of 9) are 32mm scaled miniatures variant dragonborn miniatures inspired by the Flame Dragon from the Lost Dragons collection. Caution: Prone to burning things.
This set includes:
MINIATURES:
- Female Magma Dragonborn Crown
- Female Magma Dragonborn No Crown
- Male Magma Dragonborn
- Female Magma Captain Cloak
- Female Magma Captain No Cloak
- Male Magma Champion
- Female Magma Dragonborn Caster 25mm Base
- Female Magma Dragonborn Shaman 40mm Base
- Male Magma Dragonborn Shaman 30mm Base
WEAPONS/SHIELDS:
- Magma Orb Flame
- Magma Staff 1
- Magma Staff 2
- Magma Wand
- Spell Hand
- Magma Axe
- Magma Flail
- Magma Shield
- Magma Shield Symbol
- Magma Spear
- Magma Sword
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Require supports
SCULPTED BY: William Chamberlain (Valandar)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Flame Dragonborn (Set of 9) is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Flame Kobold Variants (Set of 4)
The Flame Kobold Variants are a set of 4 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 21.5mm Diameter
Scalable?: Yes
Special Features:
1. 4 Unique, Flame Variant Kobolds - Inspired by the Flame Dragon from the Lost Dragons Kickstarter, and all with unique poses and bases.
2. Flexible Choices: The Flame Variant Kobolds come on bases as well as separated from bases for your preference of 3D printing.
Required Print Volume: 100x100x100mm
The Flame Kobold Variant Miniatures and supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Flame Kobold Variant Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Forest Cultists (Set of 5 + 2 Variants)
The Forest Cultists are a set of 5 premium, 3D printable miniatures for roleplaying games and wargames. 2 variant models are included (a separated Druid + Wolf miniature).
Format: STL (digital format for 3D printing)
Default Base Size: 1 inch (25mm) through 2 inch (50mm)
Scalable?: Yes
Special Features:
1. 5 Unique Forest Cultists - 1 Archer, 1 Spearman, 1 Stagtaur (Centuar-Style Model), 1 Elder Druid Leader, 1 Druid with Wolf Companion
2. 2 Variant Miniatures - Druid with Wolf Companion Split into 2 separate based models for further customization.
Required Print Volume: 50x50x50mm
The Forest Cultists Miniatures Set require supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Forest Cultists Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Forest Dragon Cave Entrance
The Forest Dragon Cave Entrance is a premium, 3D printable terrain piece for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 100x195x109mm
Scalable?: Yes
Special Features:
1. Three Versions:
1) Sliced for printing with no supports,
2) Pre-Generated Supports, and
3) a version with slicer support generation required.
Required Print Volume: 200x200x200mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Forest Dragon Cave Entrance was a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Forest Dragon Wyrmling
The Forest Dragon Wyrmling is a premium, 3D printable dragon model for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1'' (Diameter)
Scalable?: Yes
Special Features:
1. It's the Forest Dragon as a wee wyrmling...what more is there to say? :D
Required Print Volume: 50x50x50mm
The Forest Dragon Wyrmling requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Forest Dragon Wyrmling is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Ice Cultists (Set of 8) + Ice Cultist Weapons/Shields
The Ice Cultists are a set of 8 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 8 Unique Ice Cultists - Inspired by the Ice Dragon from the Lost Dragons Kickstarter, and all with unique poses.
2. Incredible Customization: Arm your Ice Cultists with a weapon and optional shield of your choice. Choose from a pack of 8 shields and 6 weapons themed weapons included for additional posing and customization with each miniature.
Required Print Volume: 100x100x100mm
The Ice Cultist Miniatures and weapons/shields requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Ice Cultist Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Ice Dragon (Father of Frost)
The Ice Dragon, known as the Father of Frost, is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 5'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Ice Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Lost Dragons is a collection of premium 3D model dragons designed for tabletop role playing games and war games. The Ice Dragon is a part of the Lost Dragons Collection, which was created thanks to 1,457 backers.
Ice Dragon (Father of Frost) Alternate Pose
The Ice Dragon, known as the Father of Frost, is a premium, 3D printable dragon for roleplaying or tabletop games. This is an alternate flying pose.
Format: STL (digital format for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 5'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Ice Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Lost Dragons is a collection of premium 3D model dragons designed for tabletop role playing games and war games. The Ice Dragon is a part of the Lost Dragons Collection, which was created thanks to 1,457 backers.
Ice Dragonborn (Set of 7)
Ice, Ice, Dragonborn. The Ice Dragonborn (Set of 7) are 32mm scaled miniatures variant dragonborn miniatures inspired by the Father of Frost (Ice Dragon) from the Lost Dragons collection.
This set includes:
MINIATURES:
- Female Ice Dragonborn
- Male Ice Dragonborn
- Female Ice Dragonborn Champion
- Male Ice Dragonborn Captain
- Female Ice Dragonborn Shaman
- Male Ice Dragonborn Shaman 25mm Base
- Male Ice Dragonborn Shaman 40mm Base
WEAPONS/SHIELDS:
- Ice Casting
- Ice Dagger
- Ice Staff 1
- Ice Staff 2
- Spell Hand
- Ice Axe
- Ice Hammer
- Ice Shield
- Ice Shield Symbol
- Ice Spear
- Ice Sword
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Require supports
SCULPTED BY: William Chamberlain (Valandar)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Ice Dragonborn (Set of 7) is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Ice Kobold Variants (Set of 4)
The Ice Kobold Variants are a set of 4 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 21.5mm Diameter
Scalable?: Yes
Special Features:
1. 4 Unique, Ice Variant Kobolds - Inspired by the Ice Dragon from the Lost Dragons Kickstarter, and all with unique poses and bases.
2. Flexible Choices: The Ice Variant Kobolds come on bases as well as separated from bases for your preference of 3D printing.
Required Print Volume: 100x100x100mm
The Ice Kobold Variant Miniatures and supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Ice Kobold Variant Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Ice Twin Dragon
The Ice Twin is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 3'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 4'')
Special Features:
1. Prints COMPLETELY Supportless: Files with pre-generated supports included.
2. Two Bases: 3'' Textured base, and a partially textured 4'' base (alternate scale)
3. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200 build volume.
Recommended Print Volume: 200x200x200mm
The Ice Twin does not requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Ice Twin is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Lava Dungeon Tiles (OpenForge + DragonLock Compatible)
Our Lava Dungeon Tiles is a 41-piece set of premium, 3D printable dungeon tiles & scatter terrain for roleplaying or tabletop games. This set comes with two sets - one that is compatible with OpenForge bases (which can connect with OpenLock and InfinityLock) and DragonLock bases as well.
Format: STL (digital format for 3D printing)
Default Size: Various tile sizes
Scalable?: Yes
Special Features:
1. 41-pieces including floor tiles, lava tiles, and various kinds of scatter terrain for decorating your lava caverns/dungeons.
2. Supportless: No slicer generated supports are required for any of these prints. Woohoo!
3. Slotted bases to include LED lights to make your lava dungeon tiles glow.
4. Risers included for multiple levels of lava terrain.
5. Teeter Rocks for skill terrain challenges - and yes, they actually work!
6. Various pieces of scatter to accentuate including lava rocks, a molten egg, and entire lava terrain.
7. Prints on beds as small as 100x100x100mm.
Required Print Volume: 100x100x100mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
\n
More About This Collection:
The Lava Dungeon Tile Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Sculpt by: Aether Studios
Special thanks to: Masterwork Tools for help with OpenForge Compatibility
Lost Dragons Head Wall Mounts (Set of 17 Heads / 4 Wall Shields)
Our Lost Dragons Head Wall Mounts are a set of 18 Lost Dragon Heads scaled and split for 4 different wall shields of your choice perfect for decorating nerd/geek/Lost Dragon fan rooms everywhere.
Format: STL (digital format for 3D printing)
Default Size: Shields & Heads Sized under 200mm''
Scalable?: Yes
Special Features:
1. 18 Dragon Heads (from the Lost Dragons Set Dragons)
2. 4 Variant Shields - Pick Your Favorite, and Mix & Match for ENDLESS Display Options!
3. Prints on beds as small as 220x220x250mm (Ender 3) and can be scaled up to 150% when printing heads diagonally.
Required Print Volume: 200x200x200mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Lost Dragons Head Wall Mount Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers
![Lost Dragons Lore Primer & Dragon Guide [PDF]'s Cover](https://cdn2.myminifactory.com/assets/object-assets/619bbcea28cb5/images/720X720-lostdragonsloreprimer-thumbnail-png-540x.jpg)
Lost Dragons Lore Primer & Dragon Guide [PDF]
Discover the Lost Dragons and their followers in this 80-page introductory book including:
- 18 5E-Compatible Lost Dragon Stat Blocks
- 18 Pathfinder-Compatible Lost Dragon Stat Blocks*
- Lore Campaign Information including:
- Origins & Rumors
- Dragon Cults
- Dragonkin
- Dragonkin Kobolds
- Dragon Minion 5E-Compatible Stat Blocks (PF-Compatible Versions also included*)
- Build Your Own Cultist
IMPORTANT: This is the digital PDF version of this book. No physical product/version of this book is included in this item listing.
Compatible with the 5th Edition of one of the worlds most famous RPGs.
* Pathfinder-Compatible Lost Dragons & Minion Stat Blocks included in separate, simple-format PDF.
Lost Dragons Wyrmlings (Set of 4)
The Lost Dragons Wyrmlings are premium, 3D printable dragon models for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 1'' (Diameter)
Scalable?: Yes
Special Features:
1. 4 Wyrmlings inspired by several of the Lost Dragons: Includes Blue Guardian Wyrmling, Flame Dragon Wyrmling, Forest Dragon Wyrmling, and Shadow Dragon Wyrmling.
1. They're wee wyrmlings...what more is there to say? :D
Required Print Volume: 75x75x75mm
The Lost Dragons Wyrmlings requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Lost Dragon Wyrmlings are part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Madness Dragon
The Madness Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 4'' Textured, themed base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Water Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Madness Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Red Guardian Dragon
The Red Guardian is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. Two Variant Bases - Large Gold Pile & Rock Textured Bases
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 115x65x155mm (Anycubic Photon).
Required Print Volume: 115x65x155mm (Anycubic Photon)
The Red Guardian requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Red Guardian is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Shadow Dragon
The Shadow Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 5'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Shadow Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Shadow Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Shadow Dragon (Alternate Pose)
The Shadow Dragon Alternate Pose is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Scalable?: Yes
Required Print Volume: 200x200x200mm
Pre-split into eight pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
The Shadow Dragon Alternate Pose requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Shadow Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. The original Shadow Dragon pose can be found HERE.
Shadow Variant Dragonborn: Shadowborn Wizard & Rogue
The Shadow Variant Dragonborn: Shadowborn Wizard & Rogue are a set of 3 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 2 Unique Shadow Variant Dragonborn + 1 Variant - Inspired by the Shadow Dragon from the Lost Dragons Kickstarter, and all with unique poses and bases.
2. Rogue Variant: The Rogue Shadowborn features both a hooded and a non-hooded variant.
Required Print Volume: 100x100x100mm
The Dragonborn Variant Miniatures requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragonborn Variant Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Skeletal Dragon
The Skeletal Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 4'' - 6'')
Special Features:
1. Themed fully textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Skeletal Dragon requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Skeletal Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Skeletal Dragon (Alternate Pose)
The Skeletal Dragon Alternate Pose is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 3'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 4'' - 6'')
Special Features:
1. Themed textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Skeletal Dragon Alternate Pose requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Skeletal Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. The original Skeletal Dragon Pose can be found HERE.
Storm Dragon
The Storm Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Scalable?: Yes
Required Print Volume: 200x200x200mm
Pre-split into 11 pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
The Storm Dragon requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Storm Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Themed Bases (Set of 10)
Our Themed Bases Set is a 10-piece set of premium, 3D printable terrain scatter for roleplaying or tabletop games. These bases do not require supports to print!
Format: STL (digital format for 3D printing)
Default Size: Various tile sizes
Scalable?: Yes
Special Features:
1. Various Base Themes: 5 different themes that match various Lost Dragons: skeletal, crystal/ice, forest, lava, rock, and ruins.
2. Supportless: No slicer generated supports are required for any of these prints. Woohoo!
3. Prints on beds as small as 100x100x100mm.
Required Print Volume: 100x100x100mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Themed Bases Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Variety Bases (Set of 16)
These are a variety of 16 premium 25mm bases for roleplaying or tabletop games.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS:
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Variety Bases (Set of 16) is a part of the Lost Adventures Vol. 1 Collection, which was made thanks to 3,596 backers.
Water Dragon
The Water Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 5'' Textured, water-themed base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Water Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Water Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Water Variant Dragonborn: Waterborn Warriors & Hunters
The Water Variant Dragonborn: Waterborn Warriors & Hunters are a set of 6 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 7 Models of Water Variant Dragonborn with various different weapons - Inspired by the Water Dragon from the Lost Dragons Kickstarter, and all with unique poses and bases.
2. : Decorative bases and non-decorative bases. Multiple base options available depending on desired aesthetic.
Required Print Volume: 100x100x100mm
The Dragonborn Variant Miniatures requires supports to print.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragonborn Variant Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
White Guardian Dragon
The White Guardian is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 4'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 115x65x155mm (Anycubic Photon).
Required Print Volume: 115x65x155mm (Anycubic Photon)
The White Guardian requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The White Guardian is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Zombie Dragon
The Zombie Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 4'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 150x150x150mm.
Required Print Volume: 150x150x150mm
The Zombie Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Zombie Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Forest Dragon Cave Entrance
The Forest Dragon Cave Entrance is a premium, 3D printable terrain piece for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 100x195x109mm
Scalable?: Yes
Special Features:
1. Three Versions:
1) Sliced for printing with no supports,
2) Pre-Generated Supports, and
3) a version with slicer support generation required.
Required Print Volume: 200x200x200mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Forest Dragon Cave Entrance was a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Themed Bases (Set of 10)
Our Themed Bases Set is a 10-piece set of premium, 3D printable terrain scatter for roleplaying or tabletop games. These bases do not require supports to print!
Format: STL (digital format for 3D printing)
Default Size: Various tile sizes
Scalable?: Yes
Special Features:
1. Various Base Themes: 5 different themes that match various Lost Dragons: skeletal, crystal/ice, forest, lava, rock, and ruins.
2. Supportless: No slicer generated supports are required for any of these prints. Woohoo!
3. Prints on beds as small as 100x100x100mm.
Required Print Volume: 100x100x100mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Themed Bases Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Armored Guardian Dragon (Alternate Pose)
The Armored Guardian Alternate Pose is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Scalable?: Yes
Required Print Volume: 200x200x200mm
Pre-split into eight pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
The Armored Guardian Dragon Alternate Pose requires supports to print, and comes in a split and unsplit version for your printing preference.
NOTE: An additional base is required for stabilizing the tail. Any 4'' base or above will work.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Armored Guardian Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. The original Armored Guardian pose can be found HERE.
Storm Dragon
The Storm Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Scalable?: Yes
Required Print Volume: 200x200x200mm
Pre-split into 11 pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
The Storm Dragon requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Storm Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Elemental Queen Dragon
The Elemental Queen Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Scalable?: Yes
Required Print Volume: 200x200x200mm
Pre-split into 21 pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
The Elemental Queen Dragon requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Elemental Queen Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Flame Kobold Variants (Set of 4)
The Flame Kobold Variants are a set of 4 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 21.5mm Diameter
Scalable?: Yes
Special Features:
1. 4 Unique, Flame Variant Kobolds - Inspired by the Flame Dragon from the Lost Dragons Kickstarter, and all with unique poses and bases.
2. Flexible Choices: The Flame Variant Kobolds come on bases as well as separated from bases for your preference of 3D printing.
Required Print Volume: 100x100x100mm
The Flame Kobold Variant Miniatures and supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Flame Kobold Variant Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Shadow Dragon (Alternate Pose)
The Shadow Dragon Alternate Pose is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Scalable?: Yes
Required Print Volume: 200x200x200mm
Pre-split into eight pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
The Shadow Dragon Alternate Pose requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Shadow Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. The original Shadow Dragon pose can be found HERE.
Lost Dragons Wyrmlings (Set of 4)
The Lost Dragons Wyrmlings are premium, 3D printable dragon models for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 1'' (Diameter)
Scalable?: Yes
Special Features:
1. 4 Wyrmlings inspired by several of the Lost Dragons: Includes Blue Guardian Wyrmling, Flame Dragon Wyrmling, Forest Dragon Wyrmling, and Shadow Dragon Wyrmling.
1. They're wee wyrmlings...what more is there to say? :D
Required Print Volume: 75x75x75mm
The Lost Dragons Wyrmlings requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Lost Dragon Wyrmlings are part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Dragon-Scarred Outpost Set (5 Parts)
The Daragon-Scarred Outpost Set is a 5-part, premium, 3D printable terrain piece for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: Varied
Scalable?: Yes
Special Features:
1. 5 Different Parts - Dragon Scar Building (2 parts), Dragon Scar Gate (5 parts), 2-Story Dragon Scar Tower (4 parts), Dragon Scar Walls (2 ruined, 2 regular), Melted Statue (2 parts)
2. No Supports Required - None of these models require supports to print. Woohoo!
Required Print Volume: 200x200x200mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Damaged Outpost Scatter was a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. \n \n
Lost Dragons Lore Primer & Dragon Guide [PDF]
Discover the Lost Dragons and their followers in this 80-page introductory book including:
- 18 5E-Compatible Lost Dragon Stat Blocks
- 18 Pathfinder-Compatible Lost Dragon Stat Blocks*
- Lore Campaign Information including:
- Origins & Rumors
- Dragon Cults
- Dragonkin
- Dragonkin Kobolds
- Dragon Minion 5E-Compatible Stat Blocks (PF-Compatible Versions also included*)
- Build Your Own Cultist
IMPORTANT: This is the digital PDF version of this book. No physical product/version of this book is included in this item listing.
Compatible with the 5th Edition of one of the worlds most famous RPGs.
* Pathfinder-Compatible Lost Dragons & Minion Stat Blocks included in separate, simple-format PDF.
Clockwork Dragon (Alternate Pose)
The Clockwork Dragon Alternate Pose is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: No Round Base - Approximately 100mm x 100mm base footprint
Scalable?: Yes (scaling up only with FDM)
Special Features:
1. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Clockwork Dragon Alternate Pose requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Clockwork Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. The original Clockwork Dragon Alternate Pose can be found HERE.
Skeletal Dragon (Alternate Pose)
The Skeletal Dragon Alternate Pose is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 3'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 4'' - 6'')
Special Features:
1. Themed textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Skeletal Dragon Alternate Pose requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Skeletal Dragon Alternate Pose is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. The original Skeletal Dragon Pose can be found HERE.
Variety Bases (Set of 16)
These are a variety of 16 premium 25mm bases for roleplaying or tabletop games.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS:
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
The Variety Bases (Set of 16) is a part of the Lost Adventures Vol. 1 Collection, which was made thanks to 3,596 backers.
Ice Dragon (Father of Frost) Alternate Pose
The Ice Dragon, known as the Father of Frost, is a premium, 3D printable dragon for roleplaying or tabletop games. This is an alternate flying pose.
Format: STL (digital format for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 5'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Ice Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Lost Dragons is a collection of premium 3D model dragons designed for tabletop role playing games and war games. The Ice Dragon is a part of the Lost Dragons Collection, which was created thanks to 1,457 backers.
Ice Dragonborn (Set of 7)
Ice, Ice, Dragonborn. The Ice Dragonborn (Set of 7) are 32mm scaled miniatures variant dragonborn miniatures inspired by the Father of Frost (Ice Dragon) from the Lost Dragons collection.
This set includes:
MINIATURES:
- Female Ice Dragonborn
- Male Ice Dragonborn
- Female Ice Dragonborn Champion
- Male Ice Dragonborn Captain
- Female Ice Dragonborn Shaman
- Male Ice Dragonborn Shaman 25mm Base
- Male Ice Dragonborn Shaman 40mm Base
WEAPONS/SHIELDS:
- Ice Casting
- Ice Dagger
- Ice Staff 1
- Ice Staff 2
- Spell Hand
- Ice Axe
- Ice Hammer
- Ice Shield
- Ice Shield Symbol
- Ice Spear
- Ice Sword
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Require supports
SCULPTED BY: William Chamberlain (Valandar)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Ice Dragonborn (Set of 7) is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Flame Dragonborn (Set of 9)
The Flame Dragonborn (Set of 9) are 32mm scaled miniatures variant dragonborn miniatures inspired by the Flame Dragon from the Lost Dragons collection. Caution: Prone to burning things.
This set includes:
MINIATURES:
- Female Magma Dragonborn Crown
- Female Magma Dragonborn No Crown
- Male Magma Dragonborn
- Female Magma Captain Cloak
- Female Magma Captain No Cloak
- Male Magma Champion
- Female Magma Dragonborn Caster 25mm Base
- Female Magma Dragonborn Shaman 40mm Base
- Male Magma Dragonborn Shaman 30mm Base
WEAPONS/SHIELDS:
- Magma Orb Flame
- Magma Staff 1
- Magma Staff 2
- Magma Wand
- Spell Hand
- Magma Axe
- Magma Flail
- Magma Shield
- Magma Shield Symbol
- Magma Spear
- Magma Sword
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
Any sizeSUPPORTS: Require supports
SCULPTED BY: William Chamberlain (Valandar)
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection:
Flame Dragonborn (Set of 9) is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Flame Dragon (Molten Mother) Alternate Pose
The Flame Dragon (Alternate Pose) is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 6'')
Special Features:
1. Textured base: 5'' Rock & lava textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200 build volume.
Recommended Print Volume: 200x200x200mm
The Flame Dragon (Alternate Pose) requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Flame Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Ice Dragon (Father of Frost)
The Ice Dragon, known as the Father of Frost, is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 5'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Ice Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Lost Dragons is a collection of premium 3D model dragons designed for tabletop role playing games and war games. The Ice Dragon is a part of the Lost Dragons Collection, which was created thanks to 1,457 backers.
Red Guardian Dragon
The Red Guardian is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. Two Variant Bases - Large Gold Pile & Rock Textured Bases
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 115x65x155mm (Anycubic Photon).
Required Print Volume: 115x65x155mm (Anycubic Photon)
The Red Guardian requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Red Guardian is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Fire Twin Dragon
The Fire Twin is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 3'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 4'')
Special Features:
1. Prints COMPLETELY Supportless: Files with pre-generated supports included.
2. Two Bases: 3'' Textured base, and a partially textured 4'' base (alternate scale)
3. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200 build volume.
Recommended Print Volume: 200x200x200mm
The Fire Twin does not requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Fire Twin is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Ice Twin Dragon
The Ice Twin is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 3'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 4'')
Special Features:
1. Prints COMPLETELY Supportless: Files with pre-generated supports included.
2. Two Bases: 3'' Textured base, and a partially textured 4'' base (alternate scale)
3. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200 build volume.
Recommended Print Volume: 200x200x200mm
The Ice Twin does not requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Ice Twin is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
White Guardian Dragon
The White Guardian is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 4'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 115x65x155mm (Anycubic Photon).
Required Print Volume: 115x65x155mm (Anycubic Photon)
The White Guardian requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The White Guardian is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Shadow Dragon
The Shadow Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 5'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Shadow Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Shadow Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Flame Dragon (Molten Mother)
The Flame Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 6'')
Special Features:
1. Textured base: 5'' Rock & lava textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200 build volume.
Recommended Print Volume: 200x200x200mm
The Flame Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Flame Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Core Variant Dragonborn + Weapons/Shields Pack (Set 1)
The Variant Dragonborn are a set of 4 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 4 Unique, Variant Dragonborn - Inspired by the Flame/Ice Dragons from the Lost Dragons Kickstarter, and all with unique poses.
2. Incredible Customization: Arm your Dragonborn with a weapon and optional shield of your choice. Choose from a pack of 8 fire and ice-themed weapons and 4 shields included for posing and customization with each miniature.
Required Print Volume: 100x100x100mm
The Dragonborn Variant Miniatures and weapons/shields requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragonborn Variant Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Zombie Dragon
The Zombie Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 4'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 150x150x150mm.
Required Print Volume: 150x150x150mm
The Zombie Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Zombie Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Earth Dragon
The Earth Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 6'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 6'')
Special Features:
1. 6'' Textured, Earth-themed base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Earth Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Earth Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Water Dragon
The Water Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 5'' Textured, water-themed base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Water Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Water Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Casters Variant Dragonborn + Caster Weapons/Shields Pack (Set 3)
The Casters Variant Dragonborn are a set of 4 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter) - 40mm Base (for larger casters/bases)
Scalable?: Yes
Special Features:
1. 4 Unique, Spellcaster Variant Dragonborn - Inspired by the Flame/Ice Dragons from the Lost Dragons Kickstarter, and all with unique poses and bases.
2. Incredible Customization: Arm your Dragonborn with a weapons or spell of your choice. Choose from a pack of 8 fire and ice-themed caster weapons and spells included for posing and customization with each miniature.
Required Print Volume: 100x100x100mm
The Dragonborn Variant Miniatures and weapons/shields requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragonborn Variant Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Captains & Champions Variant Dragonborn + Weapons/Shields Pack (Set 2)
The Captains & Champions Dragonborn are a set of 4 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 4 Unique, Captains & Champion Variant Dragonborn - Inspired by the Flame/Ice Dragons from the Lost Dragons Kickstarter, and all with unique poses.
2. Incredible Customization: Arm your Dragonborn with a weapon and optional shield of your choice. Choose from a pack of 8 fire and ice-themed weapons and 4 shields included for posing and customization with each miniature.
Required Print Volume: 100x100x100mm
The Dragonborn Variant Miniatures and weapons/shields requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragonborn Variant Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Clockwork Dragon
The Clockwork Dragon is a premium, 3D printable dragon for roleplaying or tabletop games that prints with no slicer supports required.
Format: STL (digital format for 3D printing)
Default Base Size: 5'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 4'' - 6'')
Special Features:
1. No slicer supports required for printing!
2. Rotating, posable neck and head pieces to make it feel just a little more special on your table.
3. 5'' Textured, Clockwork-themed base
4. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Clockwork Dragon requires no supports to print.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Clockwork Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Shadow Variant Dragonborn: Shadowborn Wizard & Rogue
The Shadow Variant Dragonborn: Shadowborn Wizard & Rogue are a set of 3 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 2 Unique Shadow Variant Dragonborn + 1 Variant - Inspired by the Shadow Dragon from the Lost Dragons Kickstarter, and all with unique poses and bases.
2. Rogue Variant: The Rogue Shadowborn features both a hooded and a non-hooded variant.
Required Print Volume: 100x100x100mm
The Dragonborn Variant Miniatures requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragonborn Variant Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Madness Dragon
The Madness Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 4'' Textured, themed base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Water Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Madness Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Blight Dragon
The Blight Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 4'' - 6'')
Special Features:
1. Poison/swamp-themed fully textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Blight Dragon requires supports to print.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Clockwork Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Lava Dungeon Tiles (OpenForge + DragonLock Compatible)
Our Lava Dungeon Tiles is a 41-piece set of premium, 3D printable dungeon tiles & scatter terrain for roleplaying or tabletop games. This set comes with two sets - one that is compatible with OpenForge bases (which can connect with OpenLock and InfinityLock) and DragonLock bases as well.
Format: STL (digital format for 3D printing)
Default Size: Various tile sizes
Scalable?: Yes
Special Features:
1. 41-pieces including floor tiles, lava tiles, and various kinds of scatter terrain for decorating your lava caverns/dungeons.
2. Supportless: No slicer generated supports are required for any of these prints. Woohoo!
3. Slotted bases to include LED lights to make your lava dungeon tiles glow.
4. Risers included for multiple levels of lava terrain.
5. Teeter Rocks for skill terrain challenges - and yes, they actually work!
6. Various pieces of scatter to accentuate including lava rocks, a molten egg, and entire lava terrain.
7. Prints on beds as small as 100x100x100mm.
Required Print Volume: 100x100x100mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
\n
More About This Collection:
The Lava Dungeon Tile Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Sculpt by: Aether Studios
Special thanks to: Masterwork Tools for help with OpenForge Compatibility
Dead Dragon Marker (White Guardian)
The Dead Dragon Marker is a premium, 3D printable terrain piece for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Size: 100.37mm x 101.56mm x 37.26mm
Scalable?: Yes
Special Features:
1. Supportless: No slicer generated supports are required for any of these prints. Woohoo!
2. Features a very dead, lacerated, and bruised version of the White Guardian.
3. Prints on beds as small as 120x120x120mm.
Required Print Volume: 150x150x150mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Frozen and Burned Cottages are a part of the Lost Dragons Collection, which was made thanks to 1,457 backers. \n \n
Dragon Egg Scatter Set (Set of 8)
Our Dragon Egg Scatter Set is an 8-piece set of premium, 3D printable terrain scatter for roleplaying or tabletop games. These eggs are all unbased and print with NO supports required!
Format: STL (digital format for 3D printing)
Default Size: Various tile sizes
Scalable?: Yes
Special Features:
1. Various Egg Themes: Each dragon egg has a different theme including flame, ice, forest, earth, shadow, water, blight/poison), and storm.
2. Supportless: No slicer generated supports are required for any of these prints. Woohoo!
3. Prints on beds as small as 100x100x100mm.
Required Print Volume: 100x100x100mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Lava Dungeon Tile Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Water Variant Dragonborn: Waterborn Warriors & Hunters
The Water Variant Dragonborn: Waterborn Warriors & Hunters are a set of 6 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 7 Models of Water Variant Dragonborn with various different weapons - Inspired by the Water Dragon from the Lost Dragons Kickstarter, and all with unique poses and bases.
2. : Decorative bases and non-decorative bases. Multiple base options available depending on desired aesthetic.
Required Print Volume: 100x100x100mm
The Dragonborn Variant Miniatures requires supports to print.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragonborn Variant Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Ice Kobold Variants (Set of 4)
The Ice Kobold Variants are a set of 4 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 21.5mm Diameter
Scalable?: Yes
Special Features:
1. 4 Unique, Ice Variant Kobolds - Inspired by the Ice Dragon from the Lost Dragons Kickstarter, and all with unique poses and bases.
2. Flexible Choices: The Ice Variant Kobolds come on bases as well as separated from bases for your preference of 3D printing.
Required Print Volume: 100x100x100mm
The Ice Kobold Variant Miniatures and supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Ice Kobold Variant Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Skeletal Dragon
The Skeletal Dragon is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital format for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 4'' - 6'')
Special Features:
1. Themed fully textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200mm
The Skeletal Dragon requires supports to print, and comes in a split and unsplit version for your printing preference.
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Skeletal Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Blue Guardian Dragon
The Blue Guardian is a premium, 3D printable dragon for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 4'' (Diameter)
Scalable?: Yes (Recommended alternate base size range: 2'' - 5'')
Special Features:
1. 4'' Textured base
2. Pre-split into multiple pieces for easier assembly & 3D printing on smaller 3D printers as small as 200x200x200mm.
Required Print Volume: 200x200x200
The Blue Guardian Dragon requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Blue Guardian Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Armored Guardian Dragon
The Armored Guardian is a premium, 3D printable dragon for roleplaying or tabletop games.
FORMAT:STL (digital format for 3D printing)
MINIMUM BUILD VOLUME:
200x200x200mmSUPPORTS: Requires supports
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Armored Guardian Dragon is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Forest Cultists (Set of 5 + 2 Variants)
The Forest Cultists are a set of 5 premium, 3D printable miniatures for roleplaying games and wargames. 2 variant models are included (a separated Druid + Wolf miniature).
Format: STL (digital format for 3D printing)
Default Base Size: 1 inch (25mm) through 2 inch (50mm)
Scalable?: Yes
Special Features:
1. 5 Unique Forest Cultists - 1 Archer, 1 Spearman, 1 Stagtaur (Centuar-Style Model), 1 Elder Druid Leader, 1 Druid with Wolf Companion
2. 2 Variant Miniatures - Druid with Wolf Companion Split into 2 separate based models for further customization.
Required Print Volume: 50x50x50mm
The Forest Cultists Miniatures Set require supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Forest Cultists Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Ice Cultists (Set of 8) + Ice Cultist Weapons/Shields
The Ice Cultists are a set of 8 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 8 Unique Ice Cultists - Inspired by the Ice Dragon from the Lost Dragons Kickstarter, and all with unique poses.
2. Incredible Customization: Arm your Ice Cultists with a weapon and optional shield of your choice. Choose from a pack of 8 shields and 6 weapons themed weapons included for additional posing and customization with each miniature.
Required Print Volume: 100x100x100mm
The Ice Cultist Miniatures and weapons/shields requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Ice Cultist Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Flame Cultists (Set of 6 +3 Variants)
The Flame Cultists are a set of 9 premium, 3D printable miniatures for roleplaying games and wargames.
Format: STL (digital format for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter) and Unbased
Scalable?: Yes
Special Features:
1. 6 Unique Flame Cultists - 2 Tribal Warriors, 2 Fire-touched Brawlers, 2 Fire-touched Spellcasters
2. 3 "Scarred" Variants - Scarred variants representing "fire-touched" tattoos of devotion.
Required Print Volume: 50x50x50mm
The Flame Cultists Miniatures Set require supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Flame Cultists Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Dragon Hunters Miniatures Set
The Dragon Hunters are a set of 3 premium, 3D printable miniatures for roleplaying games and wargames.
Format: STL (digital format for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 3 Unique Dragon Hunters - One human, one half-orc, and one dwarf come together for one purpose: to be every dragon's worst nightmare.
Required Print Volume: 50x50x50mm
The Dragon Hunters Miniatures Set require supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragon Hunters Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Earth Variant Dragonborn: Earthborn Monk & Barbarian
The Earth Variant Dragonborn: Earthborn Monk & Barbarian are a set of 2 premium, 3D printable miniatures, inspired by the Lost Dragons, for roleplaying or tabletop games.
Format: STL (digital forma for 3D printing)
Default Base Size: 1 inch (25mm) (Diameter)
Scalable?: Yes
Special Features:
1. 2 Unique Earth Variant Dragonborn - Inspired by the Earth Dragon from the Lost Dragons Kickstarter, each with unique poses and bases.
2. Monk - No Support Generation Required. Yay!
3. Barbarian - Pre-Generated Supported Model Included (For FDM, but can be used with resin as well). Non pre-supported version included as well.
4. Based and unbased versions also included in this set.
Required Print Volume: 100x100x100mm
The Dragonborn Variant Miniatures requires supports to print. Need a profile? Try our CR-10 and Ender 3 profiles here:
https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Dragonborn Variant Miniatures Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers.
Lost Dragons Head Wall Mounts (Set of 17 Heads / 4 Wall Shields)
Our Lost Dragons Head Wall Mounts are a set of 18 Lost Dragon Heads scaled and split for 4 different wall shields of your choice perfect for decorating nerd/geek/Lost Dragon fan rooms everywhere.
Format: STL (digital format for 3D printing)
Default Size: Shields & Heads Sized under 200mm''
Scalable?: Yes
Special Features:
1. 18 Dragon Heads (from the Lost Dragons Set Dragons)
2. 4 Variant Shields - Pick Your Favorite, and Mix & Match for ENDLESS Display Options!
3. Prints on beds as small as 220x220x250mm (Ender 3) and can be scaled up to 150% when printing heads diagonally.
Required Print Volume: 200x200x200mm
Need a profile? Try our CR-10 and Ender 3 profiles here: https://www.3dprintedtabletop.com/resources/3d-printing-profiles/
More About This Collection: The Lost Dragons Head Wall Mount Set is a part of the Lost Dragons Collection, which was made thanks to 1,457 backers
This is a Lost Dragons Late Pledge (All-In). You will receive everything that has been made for the campaign, as well as the remaining items (including the Lore Primer PDF). Note: Kickstarter Exclusives are NOT included.