Siege equipment stl files for 3dPrinting
Created by 
tartessosminiatures
a large collection of siege machinery of the medieval and renaissance warfare! Whether you need catapults, siege towers, cannons or steam tanks, if you have to tear down a wall this is your campaign!
Siege equipment stl files for 3dPrinting
Created by tartessosminiatures
- Pledges (4)
- Add-ons (0)
- View on Kickstarter
Pledges
41 backers
USD 24.22
Ballista
Catapult1+2
Medieval Engineers (CREW)
Siege Tower
Siege Ram
Trebuchet Big
Trebuchet
Medieval Tent +Spikes
Al medieval stl machines, crew, and accesories. -Catapults, trebuchets, siege towers, siege rams, and unlocked stretch goals.
33 backers
USD 24.22
Steam Tank 2
Steam Tank 1
Siege Engineer (CREW)
Volley Gun
Organ Gun
Mortar
Cannon Small, plus culverin.
Cannon (Big)
Horse Chariot
All powder machinery stl files, crew, and accessories: -Steam tank, cannons, mortar, culverin organ guns, and associated stretch goals.
190 backers
USD 42.40
Ballista
Catapult1+2
Medieval Engineers (CREW)
Siege Ram
Siege Tower
Trebuchet Big
Trebuchet
Cannon (Big)
Cannon Small, plus culverin.
Mortar
Organ Gun
Volley Gun
Siege Engineer (CREW)
Steam Tank 1
Steam Tank 2
Horse Chariot
Medieval Tent +Spikes
All stl files, plus: - All related unlocked stretch goals
67 backers
USD 109.00
Bow Arms
Bows arms and accessories compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Command Arms
Command arms and accessories compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Great Helms, Cavalry
Great Helms (19 different models) compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Dock Guard
-Dock Guard: 10 heads, 6 legs, 6 torsos, 6 different pair of arms:
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Great Helms
Great Helms from the Beast Master pack compatible with the Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Griffin
Two Griffin with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Infantry Heads
18 heads compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Heavy Cavalry
Heavy Horses, 4 models, 6 heads, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Cavalry Lance
8 Lance arms compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Mace
11 Maces compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Torsos
24 torsos, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Helm
8 Helms compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Horse with bard
4 different horses with 6 different heads, compatible with the Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Infantry Legs
12 Infantry legs, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Light Cavalry
4 horses, 6 heads, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Long Sword
8 Long Sword Arms compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Marine Infantry
Marine infantry, 6 legs, 6 torsos, 6 weapons, 3 shields, 10 heads; compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Paladin
Paladin on foot, 5torsos, 5legs, 5flails, 9helms, 5 shields, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Pegasus
2 pegasus, with 3 different wings, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Infantry Pikes
6 arms with pikes, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Spear Arms
6 spear arms, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
swords in cavalry sheath
6 swords in cavalry sheath for knights, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Paladin on Foot (Foundation Reward)
3 different paladins, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
King
A King, compatible with Army of the Old Age files.
Ghost Knight
A ghostly knight, who appears when his people need him.
Shields+Shield Arms
8 Different Shields+12 different arms
Flying Support
Questing Knights(Champions+accesories)
Royal Guard
Two Handed Infantry
Axe, One handed.
Demigriffin
Standard
Use heavy lance arm, or pike arm for one hand held.
Knight Shields
Tower Shields
hippogriff
Religious Pilgrims
Pegasus (Lady)
Female Guard
Lady (For Pegasus/Horse)
Hammer
Poleaxe
Hippogriff+demigriffin Middle piece, no rider
Short Swords
Torsos+Cape
Griffin (Filled)
Hippogriff (Filled)(Needs main file for arm/heads)
Demigriffin (filled)(needs main file)
Lady On Foot (bonus)
War Priest
Arms+Weapons
Accessories
Ballista
Catapult1+2
Medieval Engineers (CREW)
Siege Ram
Siege Tower
Trebuchet Big
Trebuchet
Cannon (Big)
Cannon Small, plus culverin.
Mortar
Organ Gun
Volley Gun
Siege Engineer (CREW)
Steam Tank 1
Steam Tank 2
Horse Chariot
Medieval Tent +Spikes
All files of this Siege Equipment kickstarter plus all The 3D printing Army of the Old Age kickstarter files (including early pledges).