1/35 Aliens APC
1/35 Aliens APC
3D
Published 2021-02-16T15:38:09+00:00
This is my 1/35 scale APC from the Aliens movie.
Assembled with the main gun stowed, its about 265mm long.
Its a fairly simple model, split into about 60 pieces to get the best print results for each part. The bulk of it can be printed on an FDM printer with a 200x200 print bed, but there are a number of small parts that would be ideally printed on a resin printer.
The parts are numbered in the order they appear in the instructions which can be downloaded here:
https://drive.google.com/file/d/1Yv6i_pAi6uGrzALlH0q6DmeSii7IedIP/view?usp=sharing
Some parts need multiples printed, and have x2 or x4 in the name for the quantity to print.
If you take care with the assembly, and use an M3 screw with washers on the main gun, it should be able to pivot and slide along the rails to go from the rear stwed position, to on top. The wheels can also be screwed on with M3 screws.
If you have any issues, problems, or questions, best place to contact me is on my Facebook group here:
https://www.facebook.com/groups/360348098234645/
You'll find all the info you need on printing in the instructions, including times and material weights etc.
| 发表的日期 | 16/02/2021 |
| 支持自定义 | YES |