123 Block/Angle
123 Block/Angle
Published 2020-01-25T23:00:21+00:00
This is three different objects inspired by a 123 block. I do a lot of foamboard rc airplane builds and I never have a good square tool to help me hold pieces at right angles while the hot glue dries. I initially decided to make a small right angle, or carpenter square, to help me but I decided to try a simple block that was 1"x2"x3". I decided to make it more of a frame than a block becuase I wanted to save matearial and it would make pressing it against whatever I was trying to hold at a right angle easier.
The first object is a 123 block frame with rounded corners. The last two are right angle/square tools. One of them has a scale on one of the 2"x3" sides that mark 1/2" intervals.
As an added bonus, these objects can also help you calibrate your axes.
All three of these were printed on the Prusa i3 Mk3S in PLA at 0.2mm layer height with 10% infill.
The right angle without the scale was printed with the 2"x1" face on the build plate. The other two were printed with the 2"x3" face on the build plate.
发表的日期 | 25/01/2020 |
支持自定义 | YES |