Since it is designed not to require a supports.
It is not necessary to post-process after output.
It is recommended to use PLA.
It is a 1/4 scale model of the real thing.
I used a 0.3~0.4mm nozzle.
Layer height is recommended 0.1mm.
If the nozzle you use is larger than 0.3~0.4mm,
If you enlarge the model, it will print well.
Because the model is detailed, it will look great even with larger outputs.
AWM Model : https://www.myminifactory.com/object/3d-print-105784
For correct assembly, please watch my youtube video.
Channel : https://www.youtube.com/c/CUBEBlueSky