3D-Printed Screw-In Front Lenscaps
- 工具和零件 |
- 电子产品>
- 相机 |
- 工具和零件>
- Photography
3D-Printed Screw-In Front Lenscaps
3D
Published 2017-04-18T16:34:17+00:00
Here's a really quick and easy 3D-printable screw-in front lenscap design, set-up as a customizer application. Less than $0.15 worth of materials are used to make a typical size lenscap, yet they work well and can even double as color references.
An Instructable gives the details: http://www.instructables.com/id/3D-Printed-Screw-In-Front-Lenscaps/
Note: An improved version of this is now available as https://www.myminifactory.com/object/33111
Although the customizer parameters are well commented, please see the Instructable, http://www.instructables.com/id/3D-Printed-Screw-In-Front-Lenscaps/ , I wrote giving the details -- especially about sizing the lenscap.
Creating STLs
The OpenSCAD file has fairly obvious parameters that can be set using the Customizer or by manual editing of the file. You will need to have the Write.scad library in order to create the labels using stand-alone OpenSCAD to make STL files.
Filament Choice
Pick a plastic that has a neutral color so you can use the lenscap as a color reference. The Rosewill Grey PLA used here is quite close to a neutral gray. White or gray PLA, or clear T-Glase, are what I'd recommend.
Printing Issues
It's a straightforward and fast print, although it does have tight precision constraints on the thread diameter and pitch. PLA tends to work better than ABS because ABS doesn't hold dimensions as well over a large diameter; I also find using no more that 40% fill gives less distortion of the parts as they cool. The 0.75mm pitch typical of filter screw threads is really much too fine to be printing on typical consumer-level printers, but this uses a slightly tweaked metric-compatible thread design that prints easily in PLA on my MakerGear M2 even with 0.25mm extrusion. The printed thread is quite shallow, but it's more than sufficient to hold the cap in.
| 发表的日期 | 18/04/2017 |
| 打印工艺 | FDM |