Raspberry Pi Zero / Zero W Stem Case
Raspberry Pi Zero / Zero W Stem Case
3D
Published 2017-08-18T09:40:55+00:00
Version 2 is here: https://www.myminifactory.com/object/raspberry-pi-zero-stem-case-v2-44784
This is a case for the Raspberry Pi Zero or Zero W with the "Stem" by zerostem.io - a PCB shim that turns it into a dongle.
We bought the Zero Stem from Pimoroni who are awesome.
The case was created from scratch in SketchUp to fit the Zero Stem as closely as possible.
There's two versions of the case, and two versions of the lid too!
One case has the Pi Zero / Zero W fully enclosed, the other allows access to the HDMI and USB ports - both have just enough access to the micro SD card for a pair of tweezers or small pliers so you can go ahead and glue the lid on.
The USB port for power is intentionally enclosed as it's redundant with the Zero Stem and should not be used.
One version of the lid has access to the header if you have it soldered in and the other does not.
SketchUp file is also included.
| 发表的日期 | 18/08/2017 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |