Christmas lantern with lithopanes - (for electric light sources)
$6.70 Christmas lantern with lithopanes - (for electric light sources)
3D
Published 2018-11-19T10:28:38+00:00
***Find my other designs of Christmas decors here:
https://www.myminifactory.com/object/3d-print-79478
https://www.myminifactory.com/object/3d-print-79476
https://www.myminifactory.com/object/3d-print-79480
************************************************************************
I made this lantern back in 2015 - for Christmas celebration.
It uses 3D printed litophanes (included) as shades.
Now I reworked it a bit and decided to share. The effect is very charming.
(Though most of the images are rendered, the real object performed just the same or even nicer)
You need printer bed size of 140x140mm to print parts.
When assembled this lantern measures 140x140x172mm
You can use only electric light sources (for safety reasons).
I preapared and included here the holder for traditional 3.5V E10 bulb (It gives nice, natural warm light)
If You plan to power it with AA batteries - here is well fitted holder - available for free download:
https://cults3d.com/en/3d-model/home/holder-container-for-2xaa-battery
For litophanes part please use some natural (non colored) material like ABS or PLA (natural colour is kind of "butter creamy - yellow" and gives good semitransparency). Then for the rest of elements use the opaque white.
IMPORTANT:
Following parts require limited support max height (support Z-roof = 2.2mm), that's for hinges to print properly.
- 04 support max height 2.2mm.stl
- 05 support max height 2.2mm.stl
| 发表的日期 | 19/11/2018 |
| Price | $6.70 |