AEAADV01 - Aach'yn Adventures Tiburnado
$2.00 AEAADV01 - Aach'yn Adventures Tiburnado
3D
Published 2020-10-29T11:21:19+00:00
This set is included in our 3 month loyalty pack for Tribers pledging $15 or more.
The Tiburnado is one of many natural threats on the World of Aach'yn. Between many of the major cities lie vast seas of ultra fine silt. Sand so fine that you can drown in it, boats can float on it, and many species of shark can swim through it like water. When terrible wind storms combine with these seas of sharks, the Tiburnado is born. Run!
This model prints in several peices, without supports, and connects with Aetherpegs and Dragonbite clips. The clips provide better stability for the vertical, while the pegs are superior for small spaces.
This model was sculpted by Nasos Maloudis for the patrons of Aether Studios.
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features.
Infill: 10% for all models recommended. Less infill is possible, but models will be less sturdy.
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE Recommended Print Settings:
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| 发表的日期 | 29/10/2020 |
| Price | $2.00 |
| 支持自定义 | YES |
So much fun and the pieces fit together just perfect.