Airship - The Gleaming Shard
$40.00 Airship - The Gleaming Shard
3D
Published 2020-12-21T21:10:57+00:00
The Gleaming Shard
Size in MM (XYZ): 882 x 432 x 479
Included is 1 ship from Skies of Sordane - Artificer Guilds Core Bundle. Find lore and rules for Sordane and its unique world here: https://www.myminifactory.com/object/3d-print-116233
- This ship is sculpted for 32/35mm scale.
- 4 Playable Interior levels (2 lower levels, 1 half upper level and 1 top deck level)
- Gridded and non gridded deck options
- Modular weapon and propulsion options
- Magnetized levels and modular side options
- Printable from small resin and fdm printers and larger (Anycubic Photon is the standard for the smallest sizes)
- Cutaway version of the ship, only the lower part of each level of the hull for those that just want the floorplan to play on.
All ships need magnets between levels sized 5mm x 2mm, Attachment points are 10mm x 2mm. (Dimentional Accuracy is always suspect on printed parts so some sanding can be required to fit the magnets.)
Modular Options
- Sordalite Crystal
- Boarding Hooks
- Spell Cannons
- Propellers
- Spell Cannons
- Caps (if you don't want anything there)
- Free stairs pack added to downloads
Sculpted by: Auns Baig
Find a bug? Join discord and report it! https://discord.gg/cKYygGsEjk
Added: Cutaway version of the ship, only the lower part of each level of the hull for those that just want the floorplan to play on.
Version 1.1 - February 10th 2021.
Fixed the Level 3 hole placement, on all print size versions, specific updated parts are marked as V1.1 and are noted in the Read Me (Updated) txt file included.
Fixed Engine Left and Right V1.1 in the Miscellaneous file and are noted in the Read Me (Updated) txt file included.
Recut of Level 1 of the Shard (for Small Resin printer). Noted in the Read Me (Updated) txt file included.
Version 1.2 - February 11th 2021
Level 3 had the 4 updated parts revised to include the alignment pin holes - Medium FDM Only. files marked v1.2.
Version 1.2 - February 25th 2021
Level 1 had 4 parts updated to sort mesh issue and a hole in Level 1 parts for Grid and Gridless A1 & A2, Small Resin Printer Only, files marked v1.2
Fire Ring Added to the Misc parts.
Medium FDM - Version 1.3 - March 25th 2021
Gridless Level 4 has been replaced as it was a duplicate of the Grid version level 4.
Miscellaneous - Version 1.3 - April 5th 2021
Added a new cut version of the front mount griffon so that the wings can fit in a small resin printer.
Miscellaneous - Version 1.4 - May 17th 2021
Added additional cuts to the bottom mount, crystal, smaller cuts, parts A1/A4 (into 2 parts each).
Fixed issue with part R2, bottom mount, crystal.
Fixed issue with Right wing (side mounts - Decorative Wings).
Added the Magnet Replacement Peg
Medium Resin, Grid V1.2 - Level one Alignment holes added
| 发表的日期 | 21/12/2020 |
| Price | $40.00 |
I meant to say we use 28mm. Hers a pic to show scale results