(airsoft) Altered Carbon MK 23 scope rail
(airsoft) Altered Carbon MK 23 scope rail
Published 2018-02-20T11:25:40+00:00
I really enjoyed that new Netflix show "Altered Carbon" and i noticed that one of the prop guns had a mk23 as a base, my favourite pistol, so it was a no brainer, i had to design a cover for my Tokio marui mk23 and recreate that prop.
It has a hole on top to ajust the hop unit if you use Hadron's tdc cover.
Uses m3 bolts and nuts (and washers if you want).
I wanted to make sure it woudln't need any support with overhangs of 45 degrees or higher (except holes and nut sockets but they printed fine).
As a consequence, you'll have to print a few parts and then glue them togheter (or acetone weld if you use abs).
The middle bottom piece can be printed in vase mode to save material and the "heatsink" grid will have to be printed twice.
发表的日期 | 20/02/2018 |
打印工艺 | FDM |
复杂程度 | 容易 |
支持自定义 | YES |
my remix if you want the file just ask :)