Allen Driver
Allen Driver
Published 2017-10-09T11:51:39+00:00
After building my Prusa i3 MK2S, tinkering with it became a chore with provided Allen wrenches. Instead of buying a dedicated hex driver, I made a conversion kit for the most often used 2.5 mm one.
2.0mm and 1.5mm are also available if desired.
Sliced in Cura 2.7 for ABS.
Please dial in your Live Z before printing.
Custom settings are as follows.
SHELL
Shell thickness 1.2mm
INFILL
Grid 20%
MATERIAL
Printing Temperature 250°C
Build Plate Temperature 110°C
Enable Retraction
SPEED
Print Speed 30 mm/s
Travel 90 mm/s
Initial Layer Print Speed 15.0 mm/s
Number of Slower Layers 2
COOLING
Enable Print Cooling: Yes
Fan Speed 40 %
Regular Fan 20 %
Max Fan 40 %
Regular Fan at Layer 3
Lift Head: Yes
BUILD PLATE ADHESION
Brim, width 4 mm
发表的日期 | 09/10/2017 |
让时间去下载 | - 445 分钟 |
材料数量 | 27 g |
尺寸大小 | 168.2 x 40.0 x 20.0 mm |
打印工艺 | FDM |
复杂程度 | 容易 |
支持自定义 | YES |