Alternative 370 Motor Bracket for Ossum DieselPunk Tractor
Alternative 370 Motor Bracket for Ossum DieselPunk Tractor
3D
Published 2019-03-13T10:43:28+00:00 • Remixed from Dieselpunk Racer: Sport Version, Dieselpunk FPV Tractor Racer
This is two alternative motor brackets for 370 Motors for use with the DieselPunk Tractor by Ossum.
The Sport Version includes a motor bracket for 370 Motors. But that version does not allow you to adjust the track tension freely without modifying the Body Tub.
This version is designed to look like the original motor bracket for servos so you can adjust the track tension just as you like.
There are two versions of this motor bracket. One for short shaft and one for long shaft motors. I have only printed and used the long shaft version. But I created a version for short shaft motors in case someone has such motors.
Due to the length of the 370 motors and the need for enough material around the motor it is slightly tricky to mount the motor. Just remember to insert the axle for the free-spinning wheel first before you mount the motor. Otherwise you will not be able to put it in there.
The brackets can be printed without support in the material you prefer. Just keep in mind that the motors could get warm if you drive the tractor for a long time or in rough terrain :)
Nothing special, no support needed. Use at least 30% infill.
| 发表的日期 | 13/03/2019 |
| 打印工艺 | FDM |
| 支持自定义 | YES |
