This is a small static Antique Well Hand Pump I designed to use as a Garden Fountain.
The pump is probably around 8" tall and it mounts to a piece of 1" (I.D.) piece of PVC pipe so you can make it as high or lower as you want.
I used Super glue to join the parts and the bottom flange is also glued to the PVC. The Pump handle mounts to the pump with a few 6-32" screws and I think the flange screws/nuts are 4-40.
I did very little post process sanding so I painted it with Rust-Oleum Universal Antique Pewter Hammered Enamel Spray Paint to cover up the layer lines.
I used this Water Pump (https://www.amazon.com/gp/product/B01KLBNCGG) and a piece of 5/16 id hose to connect it to the Fountain. I have it hooked to a battery/solar panel/controller so it only runs during the day for a few hours while the sun is out.
For more assembly pictures see https://www.theneverendingprojectslist.com/3dprintingprojects/gardenfountain/