Arc Reactor Mark 4
Arc Reactor Mark 4
Published 2017-05-30T15:55:30+00:00
Arc Reactor / Remix
Designed to be worn under shirt.
I recommend printing the Lense Cover in Black or a dark color perhaps a blue.
I just finished building the proto type.
I have included a basic wiring diagram for 6 LEDs using a 9V battery.
The design accounts for the wiring.
If you find a measurement is off or I need to tweak let me know and I will update.
2/3/2017 Note: Just updated the Reactor base. I added another .10 for the lense.
2/5/2017 Note: Changed the body a bit to allow for printing on smaller printers.
Also reduced the LED holder by.04
Finally, I ran the base through 123 MeshMixer and made the body smoother round. Its a big contrast.
2/6/2017 Updated the Lense and Cover dimensions
Ping me for other updates you feel it needs
Cheers
Enjoy
发表的日期 | 30/05/2017 |
打印工艺 | FDM |
复杂程度 | 容易 |