This is the upper door clip for an Arrow shed. A set of these are $12 at the hardware store, or you can print this one for a few cents.

I printed mine at ABS 4 perimeters, 75% infill, and lubricated with white lithium grease. This configuration works and feels as durable as the original. PLA might work, but I am afraid that the screw might crack the plastic. The part is available in two formats. The "OEM" format is a very close reproduction of the original injection molded part. This part contains several thin filleted sections that are difficult to print and would be very weak as a printed part. The "Modified for Printing" version has these thin sections revised to print more easily. The parts we installed on the shed are the "Modified for Printing" revision.

I printed this with the round pips that stick out down, parallel to the print bed, matching the orientation of the Thingiverse render.