Artificer (Risk Of Rain 2)
Artificer (Risk Of Rain 2)
3D
Published 2020-02-06T16:36:39+00:00
Spent hours trying to get this printable. But here it is! The model is pre-cut into its parts for FDM printing. Im including the model with the cuts as well. This should be ready to print (i'm currently printing, if I dont come back and edit there shouldn't be any problems).
Scale to 10000% in CURA
*I use JB WELD Plastic Bonder epoxy to join the separate pieces. Then sand down the edges and paint with acrylic.
You WILL need to use supports still. Definitely try and mess around with custom supports if you want to save your time and plastic. ( I used CURA's custom supports plugin)
I did have to edit some of the collar out unfortunately. It's rendered as and open/un-closed mesh. I sat through hours of blender tips and tutorial's with no luck. So it was either delete it, or spend more time than its worth manually making one.
*Link to the Ready to Print Characters I'm Done with:
https://www.thingiverse.com/ShoeMan/designs
Anyway, I'll update the pictures once mine's done printing. If you print one, I want to see it! So I can fix any problems. ENJOY
Use custom supports
| 发表的日期 | 06/02/2020 |
| 材料数量 | 130 grams |
| 尺寸大小 | 100mm x 80mm x 200mm |
Hand painted, and I designed a mount to go in the jetpack that was printed out of clear resin. Full scale 8" model.