Baby Groot
Published 2017-01-12T14:08:29+00:00
Support Free
Featured
86,356
views
38,008
downloads
33 comments
Is it a print picture of the object?
Loading comments...
Baby Groot
Published 2017-01-12T14:08:29+00:00
Description
Famous baby Groot. As people wanted, the head and the body is merged to one single printable model, including 2 versions: normal sitting version and a waving version. No support required for both. Happy printing.
Technical Information
| 发表的日期 | 12/01/2017 |
| 尺寸大小 | 55.52mm x 55.52mm x 65.26mm |
| 打印工艺 | FDM |
| 支持自定义 | YES |
Object Parts
×
Printed on: Folger Tech Prusa I3
Material: PLA
Posted at: 14th January 2017
Loading comments...
Printed on: 3DLPrinter
Material: PLA
Posted at: 14th January 2017
Printed with Super Helper SH105 from Winbo, with Winbo Brown PLA 60 microns resolution
Loading comments...
Printed on: RoBo 3D "ABS+PLA Model" Fully Assembled
Material: PLA
Posted at: 20th January 2017
Absolutely love this little guy! Amazing job and thanks for the opportunity to print this!
Loading comments...
Printed on: Willybot 1.3
Material: PLA
Posted at: 21st January 2017
baby groot airbrushed
Loading comments...
Printed on: Folger Tech FT-5
Material: PLA
Posted at: 06th May 2017
My baby Groot~
Loading comments...
Printed on: FlashForge Creator Pro
Material: PLA
Posted at: 06th May 2017
Really great model, super cute and not to hard to print.
Loading comments...
Printed on: Wanhao D4
Material: Resin
Posted at: 10th May 2017
printed on Wanhao DLP Duplicator 7 resolution of 80micron
Loading comments...
Printed on: FlashForge Creator Pro
Material: PLA
Posted at: 22nd June 2017
Loading comments...
Printed on: Ultimaker 2
Material: PLA
Posted at: 06th September 2017
Printed on Ultimaker 3 .06 Layer Height 30% Infill Sanded and Painted
Loading comments...
Printed on: Wanhoa Di3
Material: PLA
Posted at: 13th September 2017
Hatchbox Wood PLA, .1 layer height
Loading comments...
Printed on: Prusa i3 MK2 Kit
Material: PLA
Posted at: 14th September 2017
Printed Groot with glow in the Dark PLA, the model works good, very good detail of Groot and I didn't have to use any supports or rafts printed it at %20 infill.
Loading comments...
Printed on: Creality CR-10
Material: PLA
Posted at: 15th September 2017
Loading comments...
Printed on: T3D
Material: Resin
Posted at: 18th September 2017
Print by T3D mobile 3D printer that can directly prints from the light of your mobile devices. Take a look: http://myt3d.com/
Loading comments...
Printed on: Anycubic i3 Mega
Material: PLA
Posted at: 23rd October 2017
Filamentive rPLA @0.05mm layer height 10% infill. yes it does mean a 32 hour print but worth it for the detail and minimal post processing
Loading comments...
Printed on: Robo 3D R1
Material: Others
Posted at: 11th November 2017
Beautiful design, I created this video to go along with it https://youtu.be/un7RkNceMgY
Loading comments...
Printed on: Wanhoa Di3
Material: PLA
Posted at: 21st December 2017
0.12 layer . 30mm/s print speed.MS hot end.Pure Perfection.
Loading comments...
Printed on: Anet A8
Material: PLA
Posted at: 24th February 2018
pla 15 infill 55 hotbed risoluzone 0,20
Loading comments...
Printed on: Prusa i3 MK3
Material: PLA
Posted at: 14th May 2018
Thank You for fantastic model
Loading comments...
Printed on: Other
Material: PLA
Posted at: 29th May 2018
Shrunk him a bit for the first print. Printed in PLA with no supports on a Creality Ender 2. He was gone less that 24 hours later as my nephew claimed him
Loading comments...
Printed on: Anet A8
Material: ABS
Posted at: 25th June 2018
I found the best use for my wood based PLA. no just need to print the other version and paint them a bit. Great design
Loading comments...
Printed on: SeeMeCNC Hacker H2
Material: PLA
Posted at: 06th July 2018
Loading comments...
Printed on: BQ Witbox
Material: PLA
Posted at: 16th July 2018
Byambaa's Groot. Painted with acrylics via brush and airbrush.
Loading comments...
Printed on: Anet A8
Material: PLA
Posted at: 23rd August 2018
My Father really wanted one. Since it's supposed to sit on his desk at work, I didn't sand it before painting and I didn't put THAT much effort into paint-job (since it's could be damaged easier in the office. Doesn't mean I didn't put any effort, I did, but it could've been done better). Acrylics. 0.2, infill 30%
Loading comments...
Printed on: Anycubic i3 Mega
Material: PLA
Posted at: 07th December 2018
0,2 15 hours
Loading comments...
Printed on: Creality Ender 3
Material: PLA
Posted at: 27th January 2019
Amolen Wood PLA, no supports
Loading comments...
Printed on: DeltaWASP 4070
Material: PLA
Posted at: 01st February 2019
Loading comments...
Printed on: Anycubic Photon
Material: Resin
Posted at: 10th February 2019
Awesome!!! Great model!
Loading comments...
Printed on: Creality CR-10
Material: PLA
Posted at: 20th February 2019
Loading comments...
Printed on: Prusa i3 MK3
Material: PLA
Posted at: 24th February 2019
Loading comments...
Printed on: Form 2
Material: Resin
Posted at: 02nd March 2019
Loading comments...
Printed on: Creality Ender 3 Pro
Material: PLA
Posted at: 16th March 2019
Always a fun print and paint!
Loading comments...
Printed on: XYZprinting da Vinci Jr. 1.0
Material: PLA
Posted at: 24th March 2019
.15mm @210°c with eSUN pla. Time:23hrs approx.(With supports)
Loading comments...
Printed on: Creality Ender 3 Pro
Material: PLA
Posted at: 27th March 2019
Great model thanks
Loading comments...
Printed on: Anycubic
Material: PLA
Posted at: 17th April 2019
Love this model! Thank you very much! I would love to have a go at painting it but I’d probably ruin it as I’m not the artsy type! EDIT: Had a go, turned out lovely!
Loading comments...
Printed on: Creality CR-10
Material: PLA
Posted at: 10th May 2019
Loading comments...
Printed on: XYZprinting da Vinci Jr. 1.0
Material: PLA
Posted at: 14th May 2019
Gold PLA BY Esun. Printed at 100%,40%,and 25% scale with no supports. Super easy and super cute print.
Loading comments...
Material: PLA
Posted at: 13th June 2019
Awesome model! Printed at 60% size, 0.15mm resolution. First print to paint, i'm happy.
Loading comments...
Printed on: Creality Ender 3 Pro
Material: PLA
Posted at: 24th June 2019
Turned out amazing, thanks!
Loading comments...
Posted at: 26th July 2019
Printed mine already a while ago. Just remixed it with a lighted brain. So on long drives with a nightliner it's on the dashboard. And when i go asleep i switch the light/brain on. ;-) dreamtime...Underneath the piece of "green" is a 3D printed box with batteries and a switch.
Loading comments...
Printed on: Prusa i3 MK3
Material: PLA
Posted at: 05th August 2019
Loading comments...
Printed on: Anycubic Photon
Material: Resin
Posted at: 09th October 2019
Loading comments...
Printed on: Prusa i3 MK3
Material: PLA
Posted at: 17th November 2019
Stringy filament. Lowered temperature to 190°C at the head
Loading comments...
Printed on: Creality Ender 3
Material: PLA
Posted at: 24th November 2019
how about a 15% size print? YAS!!
Loading comments...
Posted at: 21st December 2019
Just finished Baby Groot in time for Christmas for a present
Loading comments...
Printed on: Anycubic i3 Mega
Material: PLA
Posted at: 03rd January 2020
Gerade baby groot fertig gestellt,..
Loading comments...
Printed on: Anycubic i3 Mega
Material: PLA
Posted at: 07th January 2020
First attempt. Very great model, to print and paint easy. Thanks to Byambaa Erdene
Loading comments...
Printed on: Creality Ender 3 Pro
Material: PLA
Posted at: 01st February 2020
First Attempt, Plawood. very nice model
Loading comments...
Printed on: Creality Ender 3
Posted at: 04th February 2020
Loading comments...
Printed on: Creality Ender 3 Pro
Material: PLA
Posted at: 10th February 2020
Left Groot printed at 25% scale with 0.12mm layers. Took around 1.5-2 hours to print. Right Groot printed at 75mm height at 0.12mm layers, took around 5-6 hours to print.
Loading comments...
Printed on: Creality Ender 3 Pro
Material: PLA
Posted at: 18th February 2020
Loading comments...
Scaled to 80%