Batman Begins Inspired belt & working buckle
6,185
views
374
downloads
6
collections
0 comments
Loading comments... 
Batman Begins Inspired belt & working buckle
3D
Published 2016-12-07T10:55:14+00:00
30
0
Add to Collection
Description
Belt and buckle inspired by the Batman Begins/Dark Knight Trilogy. The buckle locks and unlocks by turning the circle on the front of the buckle about 15 degrees. the yellow pictured one is printed at .2 mm, the other picture is an exploded view of the parts. For belt length print the belt pieces until you have enough to go all the way around, so belt is adjustable depending on how many links you need.
Saved in inches, so if your machine only prints in mm scale parts up by 25.4... 2.54 if you print in cm.
Technical Information
| 发表的日期 | 07/12/2016 |
More Information
Object Parts
Made for my red hood cosplay, but with some slight issues. Some of the models aren't touching each other so will print weird supports, I fixed that myself already though. The hinges for the actual buckle however keep breaking out even when adding extra walls, the outer walls need to be beefed up a bit to be almost the same size as the ones for the joining pieces of the rest of the belt loops, if not they will keep breaking out time and time again. The clasp pin and arm inside work fairly well but it sits too high on the pin and allows it to slip off I fixed it by just reversing the arm to go down instead of up and increased the height of the pin slightly. Other than the hinges now it works and looks great