BEST SPOOL HOLDER #HIGH FIVE
BEST SPOOL HOLDER #HIGH FIVE
3D
Published 2018-08-23T09:39:56+00:00
Here's the perfect solution for Joel's ever growing filament spools problem !!!
Anyone having a similiar setup can print this and solve the filament storage problem.
Store multiple spools at a time while being able to use them.
Due to the simple and expandable design and no over complicated parts, anyone can print this without even having a perfectly calibrated printer.
The best part about this design is that you can easily print with your filament while it being stored securely.
Print as many as required for the spools you want to print with.
Also the filaments can be accessed by any of the underlying printers on Joel's table.
So it's a win win situation for all.!
PARTS REQUIRED
- Atleast 2 of the pieces printed in PLA, PETG, ABS or any rigid material.
- A 1inch Diameter pipe cut to required length.
- M3x8 or longer screws for securing the pipe(optional).
- Lots of spools to put up.
For greater strength print with 3 or more walls and an adequate infill percentage(25+).
Print it, slide it over the wooden blocks,put the pipe through th spools and ROCK n ROLL lml
HAPPY PRINTING...
| 发表的日期 | 23/08/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |
ok