Bottle rocket dual barrel shotgun
Bottle rocket dual barrel shotgun
Published 2015-08-26T15:18:33+00:00
This miniature dual barrel shotgun allows to shoot form his barrels modified bottle rockets (with the tail removed). the gas port on the barrel allows the exhaust gases from the rocket to escape reducing flash and pressure allowing for a safer operation. (guide for modifying rockets on pictures).
Bolts required for assembly (thread x length):
-4mm x 20mm (minimum) (A)
-4mm x 15 mm (minimum) (B)
-3mm x 15 mm (minimum) (C)
Warning, this model is not a toy, bad use can result in injury always shoot straight into the air and have fun!
I'm not responsible of any damage or injury realized with this model.
Enjoy the build! :D
Print at 0.2 mm layer height, with 10% infill.
发表的日期 | 26/08/2015 |
让时间去下载 | 600 - 780 分钟 |
材料数量 | 66 grams |
尺寸大小 | multiple parts |
打印工艺 | FDM |
复杂程度 | 容易 |
支持自定义 | YES |