Builder Box
Builder Box
Published 2018-06-14T12:50:11+00:00
Much like the other puzzle i made, I didn't spesifficaly make this for the MakeAnything3D puzzle challenge. but I thought this would be a good a time and reason as any to send it in.
As such here is my second submission:
The objective of this puzzle is to make the box. Once constructed it can be used to store items. Deconstructed it can me easily kept.
It's a rather easy puzzle to solve since it was built to favour practicality rather then to be a puzzle.
Tolerences on this were 0.2mm wich is what worked for me
Print each part seperatly and you'd need to print each part twice to make the complete set. Except for the base locker peice, of which you only need to print once
There are some repeated parts like the Face bars, Side bars, and the Lid cover. there is a very slight veriation between the a and b versions of this but they should be interchangable. I just uploaded both as it's easy to say "print all parts twice" rather then give a list showing the number of times you need to print each peice.
发表的日期 | 14/06/2018 |
打印工艺 | FDM |
复杂程度 | 容易 |