Butter Robot from Rick and Morty
Butter Robot from Rick and Morty
3D
Published 2017-06-08T14:23:35+00:00
Cheers to all Rick and Morty fans out there!
This is a multi part snap-in design I've created for all the fans and it's inpired by the "Something Ricked This Way Comes" episode's butter robot.
The hands, arms, shoulders and the top stem are articulated for cool photo poses and I left openings for two wires on top.
Print with 0.1mm resolution when scaled to 50% of the actual size.
Print with 0.2mm resolution when not scaled.
(Please note that when scaling the model down to 50% - only leaves 0.1mm tolerance between snap-in parts - so I suggest not printing at above 0.1mm resolution when scaling down)
Welcome to the club pal!
Please show some support if you enjoy this design.
| 发表的日期 | 08/06/2017 |
| 尺寸大小 | ~290x118x140 |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |
I made one of your prints, in 100% full size from your files, it all went together nicely, but I opted for 1/4" bolts for assembly of the arm pins and waist pin. Nice model!