Calvin and Hobbes Snowmen Village (Collection)
Calvin and Hobbes Snowmen Village (Collection)
Published 2019-01-02T15:54:29+00:00
IMPORTANT DISCLAIMER!
Bill Watterson, creator of Calvin and Hobbes, has stated that he doesn't approve of the merchandising of his art. Out of respect for him and his amazing work, please, do not sell the digital or physical copies of these. Thank you!
So, this is definitely a work in progress as I'd like to get a few more of the scenes done. Still, Christmas approaches and I wanted to share this fun non-denominational holiday decoration. All credit for the idea goes to my wonderful wife but modeling credit goes to Bill Watterson and myself.
Important notes on printing. I've printed some of these parts on a DLP (resin) printer but all of them on an FDM printer. Just dial that printer in for the smaller parts and take your time gluing together after. Oh, and buy a pile of sandpaper...
Note on the bowling ball. I found it easiest to print the head while it's nestled in the bowling ball holder, floating a few mm above. Depending on your software, automate or hand add supports and just print slowly. I also suggest printing the bowling ball with very high infill and pins with low infill so the weight makes for maximum entertainment. I tried uploading a brief video of the bowling in action but videos aren't allowed on MyMiniFactory.
Imgur: https://imgur.com/FyVeoEN
Other Notes:
Each snowman is printed to scale nicely with oneanother and all scene objects so, if you want to scale up or down, scale every object you are going to print to the same percentage.
Anyway, I hope you enjoy and I hope to continue to add more to the collection as I make them.
Print Settings
Printer Brand: Creality
Printer: CR-10S
Rafts: No
Supports: Yes
Resolution: .12
Infill: 20% on average but the bowlingball head I printed with 75% for weight.
Filament: Hatchbox PLA Black (but would suggest white)
Notes:
Take your time with bed orientation and, if you are struggling with the arms, you can always use some small gauge wire.
Post-Printing Details:
Sand a lot - 220 grit. Go further if you want. I did 220, 320, 1000, 1500 wet.
Airbrushed primer and base white - Both can be done by hand.
Airbrush and hand paint parts for detail - Again, can be done by hand easily
Glue together - Keep track of what goes where after you take things off the bed. When you're ready to glue, use superglue and a toothpick.
发表的日期 | 02/01/2019 |
让时间去下载 | 108 - 分钟 |
材料数量 | alot |
尺寸大小 | average snowman height: 80 mm |
打印工艺 | FDM |
White PLA. Kid's acrylic paint (silver, orange and black). WOOD was perfect for killer's arms.