Carriage-01 for Euroreprap Railroad System
$9.00 Carriage-01 for Euroreprap Railroad System
3D
Published 2018-10-18T16:19:52+00:00
This is one of the carriages I'm preparing for my "Euroreprap Railroad System" collection, so it's compatible with other vehicles marked as "ERS".
This model is a complete set of parts - even a wheels' axles are 3D printed (1.75mm filament pieces are used for hinges' axles).
To learn about the assembly please take a look at this PDF instruction:
https://www.dropbox.com/s/l3r9lgrnc38p0hr/CARRIAGE-01.pdf?dl=0
>>The carriage is compatible with LEGO tracks (adequate distance between gauge lines) and its native tracks standard: "Euroreprap Railroad System" (free inter-connector track model is available).
>>No support is needed during printing
>>Printers with small bed sizes will do fine (for bed areas below 15x15 cm please contact me first to obtain adequate files set on order)
>>No special tools are needed during assembly (I use metal nail file for finishing places where excessive material remained)
>>The model's dimensions after assembly are: 240x80x120 mm (9.52x3.15x4.72 in)
>>If you like to experiment with this model on other track scales, the factors to match them are:
x0,847 for 32 mm track (scale "0")
x1.19 for 45 mm track (scale "G") - please note that after this scaling the minimal bed size will be 18x18 cm
(scaling factors may slightly differ depending on each printer accuracy level)
| 发表的日期 | 18/10/2018 |
| Price | $9.00 |
| 支持自定义 | YES |