Celtic Skull Glowing Eyes Charm
Celtic Skull Glowing Eyes Charm
3D
Published 2015-06-16T13:40:43+00:00
Getting ready for Halloween early! I wanted to have the famous Celtic Skull model on a glow necklace. I flattened it a little and added hexagonal hole for USglow 7mm thick glow necklaces.
I ended up with the surprisingly cool result that, when printed in a material that is not too opaque (such as glow in the dark green ABS,) the eyes glow when the glow necklace is activated.
I printed up a few . Pale green is Afinia glow in the dark green ABS on a Makerbot Replicator w/ Sailfish at 100 micron layers. Sliced with Skeinforge.
Orange is colorFabb Dutch Orange PLA/PHA on an Ultimaker at 80 micron layers. Sliced with Cura.
Red Is colorFabb Traffic Red PLA/PHA on a Robo3D at 100 micron layers. Sliced with Slic3r.
If you like the looks of the colorFabb, PM me for more info.
8/19/13 update. I accidentally uploaded gcode instead of the stl. If you downloaded this previous to that, check the files again. The ...QEC file is a lower polycount version.
Print this with 3 perimeters. No support. Depending on how your printer handles bridging, you may or may not need infill. Print at 0.2 mm layer height, with 10% infill. This uses 6 g of filament and takes 28 minutes.
| 发表的日期 | 16/06/2015 |
| 让时间去下载 | 28 - 38 分钟 |
| 材料数量 | 6 g |
| 尺寸大小 | 29 x 30 x 32 mm |
| 复杂程度 | 非常容易 |