Clickaloo Jet Playset: "F-111 Aardvark"
Clickaloo Jet Playset: "F-111 Aardvark"
3D
Published 2018-08-31T17:17:28+00:00
This isn't actually an F-4, unfortunately.
The model on TinkerCAD it here: https://www.tinkercad.com/things/jxLBejZqCFq
One tip? PRINT A TON OF SPARE PINS! I spent a lot of time waiting for spare parts to print. Also don't be afraid of using filament. Sacrificing strength for plastic doesn't work.
To my knowledge, this is the worlds largest 3D printed Clickaloo aircraft set. I had to do a custom piece (2HCSP) for the rudder. I get that it's pretty bad, but I did this is a week....
Forgive me, but I missed a 4HMA in the picture. Refer to the TinkerCAD model for any other mistakes and please let me know if I should change anything!
I remember growing up always looking at the pictures of F-18's and the Voodoo at CYXX. This really reminds me of the iconic F-4 Phantom, with the single tail and 2 engines.
Print at 2-3 shells and low layer height. 10-15 percent is scraping the bottom of strength. If you do 5% you'll get a headache with all the breakage.
| 发表的日期 | 31/08/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |