Clip 'Picture'
Clip 'Picture'
3D
Published 2018-12-04T10:04:00+00:00
This clip can be used to hang a picture or painting on a (slanted) wall.
Mount four clips to a wall and slide the picture from the side along the clips.
The picture of painting cannot fall to the front anymore with these clips.
The painting has a tchickness of 18.5mm. I added a FreeCAD file to alter this object.
🎞 Video: https://youtu.be/QhGLZkS4PYo
⚠ Usage of any models from 3DParts4U will be at your own risk!
⚙ My PLA Simplify3D print settings:
- 3600mm/minute (60mm/second)
- hotend 185°C | bed 50°C
- 250 micron | infill 20%
- 3 top layers | 3 bottom layers | 3 outline layers
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 100%
- no support needed
| 发表的日期 | 04/12/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |