CNC Alignment Collar for Dial Indicator!
CNC Alignment Collar for Dial Indicator!
3D
Published 2020-02-06T16:17:33+00:00
This design was created to help adjust the GRBL setting by precisely measuring the movement of each axis as well as the repeatably of these moves so we could "average" out the GRBL values/ I also highly recommend Clockwise Tools DIGR-0105 Electronic Digital Indicator Gage Gauge Inch/Metric Conversion 0-1 Inch/25.4 mm with Back Lug Auto Off Featured Measuring Tool: (http://amzn.to/2udgHgh) along with the Clockwise Tools DTCR-01 RS232 (USB) Digital Indicator Data Transfer Cable (http://amzn.to/2tJwKSx) to allow the readings to imported to the computer for statistical measurement.
Also if you want to make changes you can get the Open-SCAD code here http://openscad.diy3dtech.com/cnc-3020-3040-3060-alignment-collar-for-dial-indicators/ as well as see video on how the code works so you can modify for your own use.
Note 1: this model is not fully parametric as the individual requirement for the X/Y support arms vary to need rather being fixed to the model. I designed this for an 800 watt water cooled spindle (65mm) and tested down to a 400 watt size (52mm and up to 75mm) out side of that the strut size must be manually adjust.
Note 2: The STL which is in the file is the one you see and will fit a 3040 CNC with 800 watt water cooled spindle so no need to use the customizer is this what you have. Also it will likely work on a 3020 and 3060 with same size spindle.
Also, please follow us on MyMiniFactory and give this a like if this came in handy and for more information on this project, please visit us at http://www.DIY3DTech.com as well as subscribe to our YouTube Channel at http://YouTube.DIY3DTech.com along with a visit to our drone site and YouTube channel at http://video-drone.DIY3DTech.com
If you are looking for one of a kind swag shop for yourself or a Maker Geek friend, visit our swag shop at http://Swag.DIY3DTech.com for unique 3D Printing, Laser Cutting and CNC swag! Too, if you want a behind the scene look at what we are working on be sure to follow us on Instagram (https://www.instagram.com/diy3dtech/)!
Printer: I like these http://diy3dtech.com/creality-cr-10-best-deals/
Rafts: No
Supports: No
Resolution: .3 or better you pick
Infill: 25%
Filiments: You can use http://diy3dtech.com/pla or http://diy3dtech.com/petg
Notes:
Pretty simple print, however note you will want to flip over in your slicer so the X/Y support sits on the bed and you off to the races!
Also if your looking for a collection of professional 3D print finishing tools take a look here: http://diy3dtech.com/3d-print-clean-up-tools/
| 发表的日期 | 06/02/2020 |
