CNC Clamp 2mm to 18mm
CNC Clamp 2mm to 18mm
Published 2019-09-10T15:00:16+00:00
Clamps for holding down your workpiece on a cnc router. The clamps are designed for holding down materials with a thickness of 2mm to 18 mm.
There are 2 different sizes for the bolt that goes through, M5 or M6.
Best is to use a washer on top.
The actual foot to hold your workpiece can rotate to adjust to the thickness of your material.
This clamp can be used on a wastboard like this: https://www.youtube.com/watch?v=yhVW6Q9o-34 or on v-slots with an added drop in t-nut.
Parts to add:
1 bolt per clamp M5 or M6 also the lenght is depending on your wasteboard.
1 washer per clamp
In case of v-slots 1 drop in t-nut per clamp
Print the clamp on its side. Do not use support !!
Print with PETG
Use 0.15mm resolution.
Use 4 Perimeters for strenght.
Make sure your printer is setup well. The foot of the clamp can rotate and there is not much clearence between the parts.
Do NOT use supports.
发表的日期 | 10/09/2019 |
让时间去下载 | - 120 分钟 |
材料数量 | 24 gram |
支持自定义 | YES |