Coral Candelabra
$5.50 Coral Candelabra
3D
Published 2020-10-27T05:15:13+00:00
Hi, if you like this check out my other creations and support me here
It took some time to get to these designs; a progression from my earlier geometric based candelabras, these are more Organic, I designed them 'free hand' and came up with these two for starters "Coral Fine" and "Coral Grotesque" based on the same frame but different. Grotesque came first and is 'lumpy organic' and a bit more natural while I refined it to achieve Fine which harks back to the earlier geometric forms.
It is hard to see the difference in the pics but I assure you in the flesh the difference is apparent if not a bit subtle.
Both versions have overhangs that are quite shallow and in theory do not need supports BUT they print differently: Grotesque prints fine, no supports needed but Fine can be tricky, the two highest holders are so far from their bases that they (on a cartesian printer) tend to wobble in the Y axis base and layer shift like crazy I had to add custom supports to keep them from vibrating (see pic) and it worked. I suspect that if you have a Delta printer you won't have to worry.
Layer height: 0.12
Material: PLA
Speed: 50mm/s
Walls: 1.2mm
Infill: 15% Grid
Bed adhesion: Brim at least
| 发表的日期 | 27/10/2020 |
| Price | $5.50 |
| 材料数量 | 114 gm |
| 尺寸大小 | 133mm x 136mm x 171mm |
| 支持自定义 | YES |