Cosmo Canyon
Cosmo Canyon
3D
Published 2018-01-03T16:35:16+00:00
The Cosmo Canyon from one of my favorite games ever: the legendary Final Fantasy VII.
This is an attempt to create 3D printable version of the place, obviously had to leave the smallest details out and it is not perfectly accurate. I planned everything to be printed without supports, but for this I had to separate the windmills to be printed separately.
This model utilizes a lot of bridging to be printed without supports, I had some issues on my first print but have since fixed them and I have included the test files you can try the harder parts of the model if you are unsure about printing this.
My print was done with 0.2mm layer height, 50mm/s default speed, 10% infill using Fillamentum Ruby Red PLA filament.
| 发表的日期 | 03/01/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |
Fun project. Still unfinished but thought I'd share my progress so far. Thinking of hooking up some lights and maybe adding a campfire. Thanks again for the design.