Die Holder Wrench – 21mm OD Die
$1.70 Die Holder Wrench – 21mm OD Die
3D
Published 2019-09-27T18:25:12+00:00
A strong, die holder wrench tool, used to hold a 21mm outside diameter die, to cut "2-56" or "M2" threads, at the end of common RC servo pushrods. It is designed to be easily 3D printed, without any support, on a modern inexpensive 3D Printer.
This object includes two holes that are pre-threaded to accept M3 screws, in order to secure the die in place. It can be printed with a variety of materials, including PLA, PETG, ABS and other type of printable materials.
PLA works very well for this application. It is easy to print. The tool should be durable, easy to maintain, and last for a long time. However, it should not be stored or kept at high temperature, exceeding ~55 C (~ 130 F).
Should the tool be left in a high temperature environment, such as a parked car in the summer, I strongly recommend using another heat tolerant material, such as PETG or ABS to prevent warping.
Recommended print settings with a .4 mm nozzle:
- Layer Hight: .150 ~.160 mm, depending on motors and gearing
- 4 perimeters or shells (1.8 ~ 2.0 mm)
- 12 bottom layers (1.8 ~ 1.3 mm)
- 12 top layers (1.8 ~ 2.0 mm)
- Infill 30~40% depending on type of infill
Assembly
Use two M3 screws of sufficent lenght to secure the 21mm OD die in the tool. The holes are pre-threaded for M3. Apply just enough torque to the screws to snugly secure the die in the tool. DO NOT OVERTIGHTEN!
| 发表的日期 | 27/09/2019 |
| Price | $1.70 |
| 让时间去下载 | 50 - 65 分钟 |
| 材料数量 | 9.6 grams |
| 尺寸大小 | 90mm X 29mm X 9mm |
| 支持自定义 | YES |