AEICCV02 - Dire Penguins
$3.00 AEICCV02 - Dire Penguins
3D
Published 2021-02-10T10:07:46+00:00
This set of 3D-printable STL terrain came about from a request from our patrons. Nasos Maloudis, our Greek Sculptor, made these to fill that request. Included you find both Dire Penguins and an icy habitat for them, a total of 4 models.
The Ice terrain this is built on is from our Countryside set.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| 发表的日期 | 10/02/2021 |
| Price | $3.00 |
| 支持自定义 | YES |
This is the 4x4 Penguin Rise from this set, painted like glacier ice. Nasos Maloudis designed this set at the request of a Discord member. I used this piece as part of my 2024 AEther Studios .Build Contest