EDI-40-II Laohu
EDI-40-II Laohu
3D
Published 2018-01-22T15:04:38+00:00
This is a EDI-40-II Laohu from gundam 00 in 1/1700 scale to go along with the EX line made by bandai. this was done as a request by someone on another site, uploaded here for free as will all my models.
For assembaly print eather the full model or
1x hull
1x bridge
3xpod
3xfuel
Bridge, hull and pods connect with pins, sanding and glue required. Fuel needs to be glued into place, line up frount of fuel with pods, pods will stick out from back of ship.
print files named bridge.stl and EDI-40-II Laohu.stl horazontaly as some parts are less than 0.8mm and will only work if printed this way. advise all other parts to be printed verticaly for best finish. depending on slicer settings holes and pins may not fit snugly, recomend putty or super glue.
| 发表的日期 | 22/01/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |