F-22 Raptor Jet with display stand, removable missiles
F-22 Raptor Jet with display stand, removable missiles
3D
Published 2016-06-09T11:53:10+00:00
Also available in our Etsy! http://etsy.me/12W7uce
F22 Raptor model by Thingiverse user IIIWhiteBoyIII, simplified for easy printing and adapted with pinpeg snap components.
Everything is snap-together, and the missiles house a hidden compartment. The missile fins can rotate and pop off -- and a small hole in the center can hold a tiny (really fortune cookie size) piece of paper.
This was a custom commission we did last month, to build a set of 70 planes with 140 missiles -- in under 7 days. You can read about the details on our blog: http://carrythewhat.com/blog/?p=191
Instructions
For every plane you print, print 1 base, 1 stand, 2 missile tops and 2 missile bottoms, and 2 pins.
The missile pieces will have to be printed with heavy infill, or they'll be delicate and they might break when putting together. Everything is designed to be printed without support.
After that - everything is snap together!
Remixed From
| 发表的日期 | 09/06/2016 |
| 打印工艺 | FDM |