AEFANT01 - Elven Towers
$10.00 AEFANT01 - Elven Towers
3D
Published 2021-03-26T09:17:30+00:00
This set, Elven Towers, is the spiritual successor to Elven Buildings. Jacob Armour made Elven Buildings way back for the 1st official month of our patreon. It was built to spec for the FDG Villages style from their 2nd Dragonlock KS. This system used slotted posts and despite offering great customization, it was difficult to make a simple building. To even build a proper house, you needed one of the villages sets with posts holes. This set seeks to fix that. Simple, Supportless printing for 4x4 floors. Easy stacking, simple roof, and stair options make building towers easy.
You’ll also find the original Elven Buildings models included, but we highly suggest you enjoy the Tower style. These files are not supported and you will need copies of the older FDG villages sets to get use of them.
TERRAIN Recommended Print Settings:
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% recommended for all models
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim may be helpful on the door and door hinge.
| 发表的日期 | 26/03/2021 |
| Price | $10.00 |
| 支持自定义 | YES |