TERRAIN Recommended Print Settings
● Layer Size: 0.15mm recommended, 0.1mm for smoother features
● Infill: 10% for all models recommended, 5% minimum to support internal space.
● Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
● Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
● Raft/Brim/Supports: Brim may be helpful on small scatter items. The Vine Bridge has built-in supports that need to be removed after printing.
MINIATURE Recommended Print Settings:
- Layer Size: 0.1mm recommended, 0.05mm for resin.
- Infill: 25-35%% recommended.
- Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
- Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
- Raft/Brim/Supports: None