Filament Saddle With Spinning Roller
1,802
views
36
downloads
0 comments
Loading comments...
Filament Saddle With Spinning Roller
3D
Published 2018-07-27T17:13:36+00:00
0
0
Add to Collection
Description
The Filament Saddle is a hanging filament hold to work with 3DPN filament wall holder.
I have added and 3DPN End Cap too.
You will need One M6 Bolt and nut.
3 Waser no bigger than 23mm.
2 8mm bearings.
and one Ziptie.
1. Place bearing in top and bottom of the roller.
2. Add a washer on each side of the roller.
3. Push the bolt in from the top of the roller so the remander of the bolt is hanging out the bottom.
4. place the roller with bold in the front hole of the Saddle.
5. place Waser on the backside of Saddle.
6. put the nut on it and tighten it.
7. you can use a zip tie to stop it from coming off the wood. start zip from the back of the Saddle
Technical Information
发表的日期 | 27/07/2018 |
打印工艺 | FDM |
支持自定义 | YES |
More Information
Object Parts