FocusHex
FocusHex
3D
Published 2020-03-04T11:55:10+00:00
I have a hard time focusing on a single task, because there's so many things to be done! This project is an attempt at fixing that.
The left tray is for all the things that I have to do. Whenever something comes up, I just write it down and put it there.
Conversely, the right tray is for all the things that I've completed. It's deliberately larger than the to-do tray, so that you can see how much stuff you've already accomplished!
The middle hex is for the one thing that you want to focus on right now.
The trays are designed for the standard 9x9cm (3.5x3.5inch) note sheet that you can buy anywhere. There's a storage area behind the focus hex, so a blank note is always within easy reach.
I've included two designs; one is curved to further bring the focus hex in front. The other design is straight. You can print it either in one piece, or if you have a smaller printer, I've separated the parts and you can then glue them back together.
| 发表的日期 | 04/03/2020 |
| 支持自定义 | YES |