Force FX Lightsaber Wall Mount
Force FX Lightsaber Wall Mount
Published 2019-05-08T10:39:57+00:00
Vertical wall mount for Master Replicas/Hasbro Force FX lightsabers and other swords with blades thinner than 3cm. The base is printed in two parts - a thin bracket which is screwed to the wall and the actual stand which drops over it. You can mount the blade holder anywhere above the stand. The stand will hold lightsabers at a small angle (I'd suggest no more than +/- 30 degrees away from vertical) if you print an additional blade holder.
I strongly advise printing these parts with a very high infill as the lightsabers can be heavy. My prints were actually done on two machines. The bases were done on an Ultimaker 3 but I managed to get my hands on a Formlabs Form 2 for the clear blade holder, which adds a lot to the look of the finished display. Any resin printer like the Elegoo Mars/Saturn series should be able to do this well. The wall bracket is designed to be a very tight fit, so you may need to scale it down very slightly depending on the accuracy of your printer.
发表的日期 | 08/05/2019 |
打印工艺 | FDM |
复杂程度 | 容易 |
支持自定义 | YES |
Scalable model printed with standard settings. Dimensions, time to print and material quantity refer to the objects I made.